Serv M21-049 CSS FA812621Q0043.pdf

Combined Synopsis/Solicitation

(IAW FAR 12.603)

Solicitation Number: FA8126-21-Q-0043

Seiko Thermal Analysis System

This is a combined synopsis/solicitation for commercial items prepared in accordance with the formats in Subpart 12.6 and

Subpart 13.5, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

The Air Force Sustainment Center (AFSC/PZIMB) at Tinker Air Force Base Oklahoma, intends to award a sole source, firm fixed price contract for the acquisition of the item listed below.

CLIN # Part Number/Noun Quantity Unit of Issue Delivery Date On or Before

0001 Base Year Seiko Thermal Analysis System 1 Each 03/15/2022

1001 Option year 1 Seiko Thermal Analysis System 1 Each 03/15/2023

2001 Option year 2 Seiko Thermal Analysis System 1 Each 03/15/2024

3001 Option year 3 Seiko Thermal Analysis System 1 Each 03/15/2025

4001 Option year 4 Seiko Thermal Analysis System 1 Each 03/15/2026

This solicitation is being issued as Request for Quote (RFQ), FA8126-21-Q-0043.

Contractor is required to sign/date and fill in the pricing and delivery on page 2, complete the Unit Pricing on page

3, provide answer for clause 52.204-24 on page 41, provide answer for clause 52.204-26 on page 42, the Tax Clause on page 43, and clause 252.204-7017 on page 59. Please return 1 copy to issuing office. Contractor agrees to provide all products set forth or otherwise identified above and on any additional sheets subject to the terms and conditions specified herein.

Proposal Submission Information:

Proposal is due by 21 May 2021, 2:00 PM, Tinker AFB OK Central Daylight Time (CDT). Contact the following individual for information regarding this solicitation:

NOTE: Emailed proposals are preferred Richard Warcup

Contract Specialist richard.warcup.1@us.af.mil

Phone: (405) 739-3962

EVALUATION OF RESPONSES:

Award will be conducted and evaluated under the provisions of FAR Part 12 Commercial Items and FAR Part 13, Simplified

Acquisition Procedures.

The responsible offerors must be registered in the System for Award Management (SAM) database (available at:

https://www.sam.gov/portal/public/SAM/). Lack of registration in SAM will qualify contractor as ineligible for award.

https://www.sam.gov/portal/public/SAM/

1. OFFEROR INFORMATION

BUSINESS NAME:

STREET ADDRESS: CITY, STATE, ZIP:

CAGE CODE and DUNS:

BUSINESS WEB ADDRESS:

CONTACT PERSON:

TELEPHONE: FAX:

E-MAIL:

2. Pricing Information and Certification of Response

Total Proposed Unit Price: Proposed Delivery Date:

Offeror’s Authorized Representative's Signature Date

Type or Print Name Position or Title

Contractor is Required fill-in and sign pages 2, 3, 41, 42, 43, and 59 of this solicitation and return 1 copy to issuing office.

Contractor agrees to furnish and deliver all items set forth or otherwise identified above and on any additional sheets subject to the terms and conditions specified herein.

REQUISITION NUMBER:

F3YCEB1116A103

SOLICITATION NUMBER

FA8126-21-Q-0043

SOLICITATION ISSUE DATE:

10 May 2021

SOLICITATION DUE DATE:

21 May 2021

THIS ACQUISITION IS:

Full and Open Competition

100% Small Business Set

Aside

X Sole Source

SIZE STD:

$22M

FEDERAL SUPPLY CLASS:

J049

NAICS:

811219

DELIVERY:

SEE ITEM DESC

X FOB DESTINATION

FOB ORIGIN

DPAS RATING:

METHOD OF

SOLICITATION:

REQUEST FOR QUOTE

FA812621Q0043

Supplies or Services and Prices/Cost

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

Base Year Seiko Thermal Analysis System (TG/DTA 7200 serial number 10100718000091 and DSC 7020 serial number 10100710000005) Preventive Maintenance service.

The comprehensive PM support contract shall consist of the following:

The Contractor shall perform one PM per year on each item listed in Appendix A.

PWS and Equipment List to be attached.

Product Service Code: J049 Firm Fixed Price

CIN: F3YCEB1116A1030000AA

1 Each

Option Line Item

Option Year 1 Seiko Thermal Analysis System (TG/DTA 7200 serial number 10100718000091 and DSC 7020 serial number 10100710000005) Preventive Maintenance service.

The comprehensive PM support contract shall consist of the following:

The Contractor shall perform one PM per year on each item listed in Appendix A.

PWS and Equipment List to be attached.

Firm Fixed Price

1 Each

Option Line Item

Option Year 2 Seiko Thermal Analysis System (TG/DTA 7200 serial number 10100718000091 and DSC 7020 serial number 10100710000005) Preventive Maintenance service.

The comprehensive PM support contract shall consist of the following:

The Contractor shall perform one PM per year on each item listed in Appendix A.

PWS and Equipment List to be attached.

Firm Fixed Price

1 Each

Option Line Item

Option Year 3 Seiko Thermal Analysis System (TG/DTA 7200 serial number 10100718000091 and DSC 7020 serial number 10100710000005) Preventive Maintenance service.

The comprehensive PM support contract shall consist of the following:

The Contractor shall perform one PM per year on each item listed in Appendix A.

1 Each

PWS and Equipment List to be attached.

Firm Fixed Price

Option Line Item

Option Year 4 Seiko Thermal Analysis System (TG/DTA 7200 serial number 10100718000091 and DSC 7020 serial number 10100710000005) Preventive Maintenance service.

The comprehensive PM support contract shall consist of the following:

The Contractor shall perform one PM per year on each item listed in Appendix A.

PWS and Equipment List to be attached.

Firm Fixed Price

1 Each

Description/Specifications/Statement of Work

Requirements The Contractor shall provide a one-year base contract with 4 one-year options comprehensive PM and RM support contract. PWS to be attached to solicitation.

Packaging and Marking

Inspection and Acceptance

0001 Inspection and Acceptance Location Both Destination Instructions: NA

DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST

N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Option Line Item 1001 Inspection and Acceptance Location Both Destination Instructions: NA

DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST

N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Option Line Item 2001 Inspection and Acceptance Location Both Destination Instructions: NA

DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST

N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Option Line Item 3001 Inspection and Acceptance Location Both Destination Instructions: NA

DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST

N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Option Line Item 4001 Inspection and Acceptance Location Both Destination Instructions: NA

DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST

N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Deliveries or Performance

Contractor Destination

Delivery Schedule Ship To Address

Delivery Period

09 SEP 2021

08 SEP 2022

1 Each

Place of Performance DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Period of Performance From

09 SEP 2021

To

08 SEP 2022

Option Line Item 1001 Delivery Schedule Ship To Address

Delivery Period

09 SEP 2022

08 SEP 2023

1 Each

Place of Performance DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Period of Performance From

09 SEP 2022

To

08 SEP 2023

Option Line Item 2001

Delivery Schedule Ship To Address

Delivery Period

09 SEP 2023

08 SEP 2024

1 Each

Place of Performance DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Period of Performance From

09 SEP 2023

To

08 SEP 2024

Option Line Item 3001 Delivery Schedule Ship To Address

Delivery Period

09 SEP 2024

08 SEP 2025

1 Each

Place of Performance DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Period of Performance From

09 SEP 2024

To

08 SEP 2025

Option Line Item 4001 Delivery Schedule Ship To Address

Place of Performance DoDAAC: F3YCEB Cage:

DunsNumber:

Duns4Number:

Delivery Period

09 SEP 2025

08 SEP 2026

1 Each

CountryCode: USA

OC ALC OBC

AF BPN NO MILSBILLS PROCESSES

3001 STAFF DR DOOR G70 POST N68

TINKER AFB, OK 73145 3303

UNITED STATES

OfficeCode:

Roy Williams Telephone: 405-734-4374 Email: roy.williams.6@us.af.mil

Period of Performance From

09 SEP 2025

To

08 SEP 2026

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.242-15 Stop-Work Order. 1989-08 52.247-34 F.o.b. Destination. 1991-11

Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.201-7000 Contracting Officer's Representative 1991-12 252.204-7006 Billing Instructions. 2005-10 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 2018-12

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. 2018-12

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports WAWF payment instructions.

in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice 2in1

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(f) [Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in Document routing.

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F03000

Issue By DoDAAC FA8126

Admin DoDAAC FA8126

Inspect By DoDAAC ____

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) F3YCEB

Service Acceptor (DoDAAC) FA8126

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

roy.williams.6@us.af.mil

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Special Contract Requirements

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. 2016-03

As prescribed in 211.274-6(a)(1), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology – International symbology specification – Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site /uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded ____ Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with Subcontracts paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.204-9 Personal Identity Verification of Contractor Personnel. 2011-01 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. 2020-06 52.204-13 System for Award Management Maintenance. 2018-10 52.204-18 Commercial and Government Entity Code Maintenance. 2020-08

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities.

2018-07

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. 2015-11 52.212-4 Contract Terms and Conditions-Commercial Items. 2018-10 52.219-6 Notice of Total Small Business Set-Aside. 2020-11 52.222-3 Convict Labor. 2003-06 52.222-21 Prohibition of Segregated Facilities. 2015-04 52.222-41 Service Contract Labor Standards. 2018-08 52.222-50 Combating Trafficking in Persons. 2020-10 52.222-55 Minimum Wages Under Executive Order 13658. 2020-11 52.222-62 Paid Sick Leave Under Executive Order 13706. 2017-01 52.223-5 Pollution Prevention and Right-to-Know Information. 2011-05 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving. 2020-06 52.225-3 Alternate I Buy American-Free Trade Agreements-Israeli Trade Act. (Alternate I) 2021-01 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. 2018-10 52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. 2013-12 52.233-4 Applicable Law for Breach of Contract Claim. 2004-10 52.237-2 Protection of Government Buildings, Equipment, and Vegetation. 1984-04 52.253-1 Computer Generated Forms. 1991-01

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 2011-09 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2013-09 252.203-7003 Agency Office of the Inspector General. 2019-08 252.204-7003 Control of Government Personnel Work Product. 1992-04 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. 2019-12 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. 2016-05

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

2021-01

252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. 2014-09 252.223-7008 Prohibition of Hexavalent Chromium. 2013-06 252.225-7001 Buy American and Balance of Payments Program. 2017-12 252.225-7002 Qualifying Country Sources as Subcontractors. 2017-12 252.225-7048 Export-Controlled Items. 2013-06 252.232-7010 Levies on Contract Payments. 2006-12

252.232-7017 Accelerating Payments to Small Business Subcontractors-Prohibition on Fees and Consideration.

2020-04

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. 2013-06 252.243-7001 Pricing of Contract Modifications. 1991-12 252.244-7000 Subcontracts for Commercial Items. 2020-10 252.246-7008 Sources of Electronic Parts. 2018-05

FAR Clauses Incorporated by Full Text

52.204-1 Approval of Contract. 1989-12

As prescribed in , insert the following clause:4.103

APPROVAL OF CONTRACT (DEC 1989)

This contract is subject to the written approval of [identify title of designated agency official here] and shall not be binding the Contracting Officer until so approved.

(End of clause)

52.204-19 Incorporation by Reference of Representations and Certifications. 2014-12

As prescribed in , insert the following clause.4.1202(b)

INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014)

The Contractor's representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of clause)

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

2020-08

As prescribed in , insert the following clause:4.2105(b)

PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT (AUG 2020)

As used in this clause-(a) Definitions.

means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network ( , Backhaul e.g.

connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired ( , fiber optic, coaxial cable, e.g.

Ethernet).

means The People's Republic of China.Covered foreign country means–Covered telecommunications equipment or services

Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such (1) entities);

For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other (2) national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities);

Telecommunications or video surveillance services provided by such entities or using such equipment; or(3)

Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in (4) consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.

means–Critical technology

Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms (1) Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations;

Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under (2) subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled-

Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, (i) nuclear nonproliferation, or missile technology; or

For reasons relating to regional stability or surreptitious listening;(ii)

Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of (3) title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities);

Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of (4) nuclear equipment and material);

Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title (5) 42 of such Code; or

Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. (6) 4817).

means arrangements governing the physical connection of two or more networks to allow the use of another's Interconnection arrangements network to hand off traffic where it is ultimately delivered ( , connection of a customer of telephone provider A to a customer of telephone e.g.

company B) or sharing data and other information resources.

means an inquiry designed to uncover any information in the entity's possession about the identity of the producer or Reasonable inquiry provider of covered telecommunications equipment or services used by the entity that excludes the need to include an internal or third-party audit.

means cellular communications services ( , voice, video, data) received from a visited network when unable to connect to the Roaming e.g.

facilities of the home network either because signal coverage is too weak or because traffic is too high.

means any component necessary for the proper function or performance of a piece of equipment, system, or Substantial or essential component service.

. (b) Prohibition Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) (1) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. The Contractor is prohibited from providing to the Government any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104.

Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the (2) head of an executive agency on or after August 13, 2020, from entering into a contract, or extending or renewing a contract, with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract.

This clause does not prohibit contractors from providing-(c) Exceptions.

A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or(1)

Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such (2) equipment transmits or otherwise handles.

Reporting requirement. (d) In the event the Contractor identifies covered telecommunications equipment or services used as a substantial or (1) essential component of any system, or as critical technology as part of any system, during contract performance, or the Contractor is notified of such by a subcontractor at any tier or by any other source, the Contractor shall report the information in paragraph (d)(2) of this clause to the Contracting

Officer, unless elsewhere in this contract are established procedures for reporting the information; in the case of the Department of Defense, the

Contractor shall report to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil.

The Contractor shall report the following information pursuant to paragraph (d)(1) of this clause(2)

Within one business day from the date of such identification or notification: the contract number; the order number(s), if applicable; (i) supplier name; supplier unique entity identifier (if known); supplier Commercial and Government Entity (CAGE) code (if known); brand; model number (original equipment manufacturer number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended.

Within 10 business days of submitting the information in paragraph (d)(2)(i) of this clause: any further available information about (ii) mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of covered telecommunications equipment or services, and any additional efforts that will be incorporated to prevent future use or submission of covered telecommunications equipment or services.

The Contractor shall insert the substance of this clause, including this paragraph (e) and excluding paragraph (b)(2), in all (e) Subcontracts.

subcontracts and other contractual instruments, including subcontracts for the acquisition of commercial items.

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. 2021-

As prescribed in , insert the following clause:12.301(b)(4)

CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS-COMMERCIAL ITEMS

(JAN 2021)

The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by (a) reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, (1) (JAN 2017) Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other (2) Covered Entities (Section 1634 of Pub. L. 115-91).(JUL 2018)

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (3) (AUG 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(4) (NOV 2015)

52.233-3, Protest After Award (31 U.S.C. 3553).(5) (AUG 1996)

52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(6) (OCT 2004)

The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in (b) this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[ .]Contracting Officer check as appropriate

52.203-6, Restrictions on Subcontractor Sales to the Government , with (41 U.S.C. 4704 and 10 U.S.(1) (JUNE 2020) Alternate I (OCT 1995)

C. 2402).

52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (JUN 2020)

52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-5). (3) (JUN 2010)

(Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).(4) (JUN 2020)

[Reserved].(5)

52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).(6) (OCT 2016)

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).(7) (OCT 2016)

52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (8) (JUN

(31 U.S.C. 6101 note).2020)

52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).(9) (OCT 2018)

[Reserved].(10)

(11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (15 U.S.C. 657a).(i) (MAR 2020)

Alternate I of 52.219-3.(ii) (MAR 2020)

(12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (if the offeror elects to waive the (i) (MAR 2020) preference, it shall so indicate in its offer) (15 U.S.C. 657a).

Alternate I of 52.219-4.(ii) (MAR 2020)

[Reserved](13)

(14) 52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).(i) (NOV 2020)

Alternate I of 52.219-6.(ii) (MAR 2020)

(15) 52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(i) (NOV 2020)

Alternate I of 52.219-7.(ii) (MAR 2020)

52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)).(16) (OCT 2018)

(17) 52.219-9, Small Business Subcontracting Plan (15 U.S.C. 637(d)(4)).(i) (JUN 2020)

Alternate I of 52.219-9.(ii) (NOV 2016)

Alternate II of 52.219-9.(iii) (NOV 2016)

Alternate III of 52.219-9.(iv) (JUN 2020)

Alternate IV of 52.219-9(v) (JUN 2020)

(18) 52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(i) (MAR 2020)

Alternate I of 52.219-13.(ii) (MAR 2020)

52.219-14, Limitations on Subcontracting (15 U.S.C. 637(a)(14)).(19) (MAR 2020)

52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(20) (JAN 1999)

52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (15 U.S.C. 657f).(21) (MAR 2020)

(22) 52.219-28, Post Award Small Business Program Rerepresentation (15 U.S.C. 632(a)(2)).(i) (NOV 2020)

Alternate I (MAR 2020) of 52.219-28.(ii)

52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (23) (MAR

(15 U.S.C. 637(m)).2020)

52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned (24)

Small Business Program (Mar2020) (15 U.S.C. 637(m)).

52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(25) (MAR 2020)

52.219-33, Nonmanufacturer Rule (15U.S.C. 637(a)(17)).(26) (MAR 2020)

52.222-3, Convict Labor (E.O.11755).(27) (JUN 2003)

52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O.13126).(28) (JAN2020)

52.222-21, Prohibition of Segregated Facilities .(29) (APR 2015)

(30) 52.222-26, Equal Opportunity (E.O.11246).(i) (SEP 2016)

Alternate I of 52.222-26.(ii) (FEB 1999)

(31) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(i) (JUN 2020)

Alternate I of 52.222-35.(ii) (JUL 2014)

(32) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(i) (JUN 2020)

Alternate I of 52.222-36.(ii) (JUL 2014)

52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).(33) JUN 2020

52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).(34) (DEC 2010)

(35) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).(i) (OCT 2020)

Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (MAR 2015)

52.222-54, Employment Eligibility Verification ( ). (Executive Order 12989). (Not applicable to the acquisition of commercially (36) OCT 2015 available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

(37) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not (i) applicable to the acquisition of commercially available off-the-shelf items.)

Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)(ii) (MAY 2008)

52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).(38)

52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (E.O. 13693).(39) (JUN 2016)

(40) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (E.O.s 13423 and 13514).(i) (JUN 2014)

Alternate I of 52.223-13.(ii) (OCT 2015)

(41) 52.223-14, Acquisition of EPEAT®-Registered Televisions (E.O.s 13423 and 13514).(i) (JUN 2014)

Alternate I (Jun2014) of 52.223-14.(ii)

52.223-15, Energy Efficiency in Energy-Consuming Products (42 U.S.C. 8259b).(42) (MAY 2020)

(43) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (E.O.s 13423 and 13514).(i) (OCT 2015)

Alternate I of 52.223-16.(ii) (JUN 2014)

52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).(44) (JUN 2020)

52.223-20, Aerosols (E.O. 13693).(45) (JUN 2016)

52.223-21, Foams (Jun2016) (E.O. 13693).(46)

(47) 52.224-3 Privacy Training (5 U.S.C. 552 a).(i) (JAN 2017)

Alternate I of 52.224-3.(ii) (JAN 2017)

52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(48) ( 2021)JAN

(49) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (41 U.S.C.chapter83, 19 U.S.C.