SELCO CABLE TRUCK SPECS. Yes No Template -.PDF

Customer SHREWSBURY

ELECTRIC & CABLE OPERATIONS

(SELCO)

Address 100 MAPLE AVE.

SHREWSBURY, MA 01545

US

This device shall be to the manufacture's standard. It shall be equipped with the manufacture's equipment and accessories which are included as standard in the advertised and published literature for the unit. No such item of equipment or accessories shall be removed or omitted for the reason that it was not specified in the bid.

If it is necessary to bid alternate equipment or to take exceptions to the specifications as set forth, this must be so stated in your bid. For each item, please place a X in the appropriate space (Yes__ No__) to signify whether or not you are in complete compliance with the specification. Failure to follow the format or answer the specification may cause your bid to be disqualified. If you need extra space to describe your product, please attach extra sheets. When doing this, be sure your description references the appropriate question number.

General Specifications

Comply Item Description Units Qty Yes No

Unit

1. Aerial Device EA 1 ____ ____

2. 40 foot telescopic articulating aerial device with an end mounted, hydraulically leveled platform. Unit installation is behind the cab chassis built in accordance with standard specifications and to include the following features:

EA 1 ____ ____

A. Ground to bottom of platform height: 35.0 feet ____ ____ B. Working height: 40.0 feet ____ ____ C. Maximum reach to edge of platform: 26.5 feet (at 12 foot platform height) ____ ____ D. Telescopic boom extension: 10 feet ____ ____ E. Noncontinuous rotation: 370 degrees ____ ____ F. Non-Insulating Aerial Device ____ ____ G. Platform Capacity: 400 lbs. ____ ____ H. Articulating Arm: Articulation is from 0 to 90 degrees. ____ ____ I. Compensation System: By raising or lowering the articulating arm only, the telescopic boom maintains its relative angle in relation to the ground.

The work position is achieved through a single function operation.

J. Telescoping upper boom: Articulation is from -25 to 78 degrees. ____ ____ K. Hydraulic Leveling: Platform automatically maintains level during boom articulation through a hydraulic leveling system that requires no major preventive maintenance. Hydraulic leveling permits storing of the platform in a horizontal position for road travel.

L. Controls: Electric style controls activate hydraulic valve for aerial device operation.

M. Hydraulic System: Open center system operating at 2.5 gpm and 2,200 psi ____ ____

Comply Item Description Units Qty Yes No

N. Unit is painted with a powder coat paint process which provides a finish-painted surface that is highly resistant to chipping, scratching, abrasion and corrosion.

O. Structural Warranty on all of the following applicable major components is to be warranted for so long as the initial purchaser owns the product:

Booms, boom articulation links, hydraulic cylinder structures, outrigger weldments, pedestals, subbases and turntables.

P. Manuals: Two (2) operator and Maintenance/Parts manuals ____ ____

3. Dual Strobe Beacons, Amber LED With Brush Guard EA 1 ____ ____

4. Poly Hydraulic Reservoir, Pedestal Mounted, 7 Gallon (Includes Sight Gauge) EA 1 ____ ____

5. Post mount pedestal EA 1 ____ ____

6. Single One (1) Man, Fiberglass Walk-In Platform; fixed position with door. 26 x 26 x 42 inches; includes safety strap and latch for door.

EA 1 ____ ____

7. Platform Cover, Soft With Elastic Retention And Lanyard Attachment, For Walk-In Platform

EA 1 ____ ____

8. 110 VAC Outlet At Platform EA 1 ____ ____

9. Two-Speed Electric controls at the platform include toggle switch controls for boom functions, an emergency stop switch, and a high/low speed selector that is integral with the master engage switch. Lower controls are on a pendent mounted box and include electric toggle switches and a 'push to operate' master engage switch. Lower controls are installed in a body compartment unless otherwise specified.

EA 1 ____ ____

10. Steel upper control cover EA 1 ____ ____

11. Manual lowering valve located at the boomtip. For use in emergency situations to allow the operator to lower the boom to the ground

EA 1 ____ ____

12. Engine Start/Stop With Secondary Stowage System EA 1 ____ ____

13. Powder coat unit white. EA 1 ____ ____

14. Additional Unit Option, 300 lb capacity lifting eye installed EA 1 ____ ____

15. ePTO, 2.5 GPM, Pedestal Mounted EA 1 ____ ____

Unit & Hydraulic Acc.

16. HVI-22 Hydraulic Oil (Standard) EA 9 ____ ____

17. Standard Pump for PTO EA 1 ____ ____

18. Hot Shift PTO (for Automatic Transmission) EA 1 ____ ____

19. Standard Altec PTO/Transmission Functionality for Non-Allison Automatic EA 1 ____ ____

Item Description Units Qty Yes No

Transmissions

20. Standard Parking Brake Machine interlock EA 1 ____ ____

Body

21. 108 Inch Universal Small Aerial Body for a 60 Inch CA Chassis with 38 Inch Long Side Access Tailshelf to Meet the Following Specifications:

EA 1 ____ ____

A. Basic body fabricated from A40 grade 100% zinc alloy coated steel ____ ____ B. All doors are full, double paneled, self-sealed with built-in drainage. ____ ____ C. Stainless steel hinge rods extend full length of door. ____ ____ D. Door hinges are zinc alloy material attached with rivets ____ ____ E. All doors contain stainless steel, flush mounted, paddle activated rotary style latches with two-stage locking, including keyed locks and adjustable strikers.

F. Heavy-gauge welded steel frame construction with smooth galvaneal floor. ____ ____ G. Possible contact edges are folded for safety. ____ ____ H. Door header drip rail at top for maximum weather protection. ____ ____ I. Neoprene or rolled fenders on wheel fender panels. ____ ____ J. Steel treated for improved primer bond and rust resistance. ____ ____ K. Automotive underseal applied to body. ____ ____ L. Automotive type non-porous door seals fastened to the door facing. ____ ____ M. 108 Inch Body Length ____ ____ N. 40 Inch Body Height (Standard) ____ ____ O. 94 Inch Body Width (Standard) ____ ____ P. 20 Inch Body Compartment Depth (Standard) ____ ____ Q. 8 Inch Body crossmembers (Standard) ____ ____ R. No Treadplate On Compartment Tops ____ ____ S. 6 Inch tall wooden tailboard installed at the rear of body cargo area ____ ____ T. Stainless Steel Rotary Paddle Latch With Lock (Standard) ____ ____ U. Master Body Locking System (Standard) ____ ____ V. One (1) Double-Capacity Chock Holder On Curbside Of Body ____ ____ W. Gas Shock Type Rigid Door Holders For Vertical Doors (Standard) ____ ____ X. Chains On Horizontal Doors ____ ____ Y. B-Line Channel Installed In Compartments ____ ____ Z. 1st Vertical Streetside (LH) - Two (2) Adjustable Shelves With

Removable Dividers On 4 Inch Centers

ZA. 1st Horizontal Streetside (LH) - One (1) Fixed Shelf With Removable Dividers On 8 Inch Centers

ZB. Rear Vertical Streetside (LH) - Six (6) Adjustable Locking Swivel Hooks ____ ____ ZC. 1st Vertical Curbside (RH) - Seven (7) Adjustable Locking Swivel Hooks, Louvered Panel Installed in Cargo Wall

ZD. 1st Vertical Curbside (RH) - One (1) Adjustable Shelf With Adjustable Dividers On 4 Inch Centers.

ZE. 1st Horizontal Curbside (RH) - One (1) Adjustable Shelf With Adjustable Dividers On 4 Inch Centers. One (1) Fixed Shelf On Bottom Of Compartment With Adjustable Dividers On 4 Inch Centers

Item Description Units Qty Yes No

ZF. Rear Vertical Curbside (RH) - Two (2) Adjustable Shelves With Removable Dividers On 4 Inch Centers

ZG. One (1) Small Bolt-On Grab Handle Installed At Rear Of Curbside Compartments

ZH. 38 Inch Tailshelf with Integrated Side Access Steps and Smooth Galvaneal Floor Installed at Rear of Body. Includes One (1) Square Grab Handle.

Body and Chassis Accessories

22. Set of Safety Chain Eye Bolts EA 1 ____ ____

23. ICC Underride Protection EA 1 ____ ____

24. Receiver Hitch, 2, Class 4, Incorporated Into Frame Extension EA 1 ____ ____

25. Rear Torsion Bar EA 1 ____ ____

26. No Counterweight Required EA 1 ____ ____

27. Rubber Belted Step, Mounted Beneath Side Access Steps (Installed to Extend Approx. 2 Outward)

EA 1 ____ ____

28. Ford OEM Aluminum Step Bars, Streetside and Curbside Installation, (Black) EA 1 ____ ____

29. Boom Rest "A" Configuration - Allows Approx. 18 inches on Streetside of Tailshelf Platform and Approx. 6 inches off the Tailshelf, Raise boom rest enough for platform to be able to stow in the underneath position without interference with retaining rail. Keep the platform as close to the SS as possible

EA 1 ____ ____

30. Steel Boom Saddle Support, Standard EA 1 ____ ____

31. Polyethylene Boom Saddle Support, Standard EA 1 ____ ____

32. Cover Plate For Cargo Area Boom Rest EA 1 ____ ____

33. Wheel Chocks Option 1, DICA wheel chocks UC1400-6 QTY 10 shipped loose Altec PN 066001021

EA 1 ____ ____

34. Mud Flaps with Altec Logo (Pair) EA 1 ____ ____

35. Rock Guards, Lexan EA 1 ____ ____

36. Lower Control Holder, Locate in the hotstick shelf at the rear door.

-Make the bracket in such a way that it has as minimal interference as possible getting the hotsticks out.

-mount bracket so that the lower control is on it's back

EA 1 ____ ____

37. Post Style Cone Holder (Holds up to four 15 x 15 large cones), Mounted on streetside of tailshelf, painted bright yellow

EA 1 ____ ____

38. PVC Canister Kit, 6 DIA Pipe 94 L with Aluminum Cap Door and Mounting U- EA 1 ____ ____

Item Description Units Qty Yes No

Bolts, mounted on the cs cargo

39. Inverter storage inside of body compartment with guard and provisions for remote GFCI receptacle, CS 1st vertical

EA 1 ____ ____

40. Battery Storage In Remote Steel Enclosure, Located Outside Of Body Compartments , Cargo Area CS and as forward as possible

EA 1 ____ ____

41. Ladder Storage Option 1, Prime design Ladder rack -installed on CS

EA 1 ____ ____

42. 5 LB Fire Extinguisher with Light Duty Bracket Installed Per DEPS 042 (In Cab Or Inside Compartment Only) (Amerex #B402T), Ship Loose with two decals

EA 1 ____ ____

43. Safety Harness and 4.5 Ft Lanyard (Fits Medium to Xlarge), Includes Pouch and Placards, Single Harness

EA 1 ____ ____

44. Triangular Reflector Kit (Contains 3 Reflectors) EA 1 ____ ____

45. Slope Indicator Assembly for Machine without Outriggers EA 1 ____ ____

46. Vinyl Manual Pouch for Storage of All Operator and Parts Manuals EA 1 ____ ____

47. Additional Body/Chassis Accessory, Remove SS horizontal shelf EA 1 ____ ____

Electrical Accessories

48. Adhesive Strip Lighting, LED, Installed Around Top And Sides Of Compartment Door Facings In Body (Installed At Final Assembly)

EA 6 ____ ____

49. Compartment Lights Wired To Dash Mounted Master Switch EA 1 ____ ____

50. Lights And Reflectors In Accordance With FMVSS 108 (Complete LED) EA 1 ____ ____

51. Strobe Light Option, ION Super LED V-series Strobe lights (IONSV1A P/N 9705-70186)

- (1) over wheel well SS

- (1) over wheel well CS

EA 1 ____ ____

52. Corner Strobe Systems Option, To be Federal Signal MPS300U-A Micro Pulse Ultra 3-LED Light head Amber

- Two (2) Surface Mounted Lights in Front Grille

- One (1) mounted rear of body curbside

- One (1) mounted rear of body streetside

- Altec Standard (2) Round Surface Mounted Lights at Rear

EA 1 ____ ____

53. Remote Spot Light, LED, Magnetic Mount, With Programmable Wireless EA 1 ____ ____

Item Description Units Qty Yes No

Remote (Go-Light #79014), Shipped loose

54. Remote Spot Light, LED, Permanent Mount, With Wireless Dash Mounted Controls And Programmable Wireless Remote (Go-Light #20074), Post mounted at the front of the body CS -Make sure to clear the ladder

EA 1 ____ ____

55. Single Tone Backup Alarm, Installed Between The Chassis Frame Rails At The Rear Of The Chassis. To Work In Conjunction With Chassis Reverse Drive System.

EA 1 ____ ____

56. Altec Backup Camera System, 7 Inch Color LCD Monitor, Heated Infrared Camera With Day/Night Sensor And Audio, Mount in place of rear view mirror

EA 1 ____ ____

A. 7 Inch Color LCD Monitor With LED Backlighting And Proximity Indicators

B. 2 Inputs With Independent Triggers ____ ____ C. Heated Infrared Camera With Day/Night Sensor And Audio ____ ____ D. Mirror/Normal View ____ ____ E. IP68 Rated ____ ____ F. Wide Viewing Angle (104 Degrees Horizontal x 78 Degrees Vertical) ____ ____ G. 20 Meter Cable Assembly ____ ____

57. Trailer Receptacle, 7-Way (Blade Type) Installed At Rear EA 1 ____ ____

58. Upfitter Switches, Ford (Supplied With Chassis) EA 1 ____ ____

59. Inverter Wired Battery Hot To Switch Mounted In Chassis Cab EA 1 ____ ____

60. Inverter/Charger, 3000 Watt, Pure Sine Wave, 120 VAC (Sensata #12NP30) EA 1 ____ ____

61. Auxiliary Batteries Option, Deep cycle aux battery in cargo area EA 1 ____ ____

62. Electrical Receptacle, 120 Volt, GFCI, Includes Weather-Resistant Enclosure , One (1) mounted on curbside rear vertical compartment above tailshelf

- Two (2) mounted behind seats in cab, wired to inverter

EA 3 ____ ____

63. Electrical Receptacle (120 Volt) Option, 240 outlet mounted inboard of the 120 on rear of curbside vertical compartment

EA 1 ____ ____

64. Power Distribution Module 10 is a Compact Self-Contained Electronic System that Provides a Standardized Interface with the Chassis Electrical System

EA 1 ____ ____

65. Install Remote Engine Start/Stop System In Final Assembly EA 1 ____ ____

66. Install Chassis (OEM) Supplied Backup Camera In Final Assembly EA 1 ____ ____

67. Install Secondary Stowage System In Final Assembly EA 1 ____ ____

68. Install ePTO in Final Assembly (JEMS DC) EA 1 ____ ____

Item Description Units Qty Yes No

69. PTO Indicator Light, Installed In Cab EA 1 ____ ____

Finishing Details

70. Front and Rear Frame Mounted and Under Body Mounted Components (With the Exception of Rust Resistant Components) Will Be Painted Black DEPS 005 DEPS 095 (Includes Non OEM Front Bumpers and Cabguards)

EA 1 ____ ____

71. Powder Coat Unit Altec White EA 1 ____ ____

72. Finish Paint Body Accessories Above Body Floor Altec White EA 1 ____ ____

73. Apply Non-Skid Coating (Black) to All Walking Surfaces DEPS 059 EA 1 ____ ____

74. Safety and Instructional Decals English EA 1 ____ ____

75. Vehicle Height Placard Installed In Cab DEPS 004 EA 1 ____ ____

76. HVI-22 Hydraulic Oil Placard EA 1 ____ ____

77. Stability Test Unit According to ANSI Requirements EA 1 ____ ____

78. Regional Build EA 1 ____ ____

79. Inbound Freight EA 1 ____ ____

80. As Built Electrical and Hydraulic Schematics to be Included In the Manual Pouch (Deps 024)

EA 1 ____ ____

81. Completed Test Forms To Be Included In The Manual Pouch:

-Stability Test Form -Dielectric Test Form (For Insulated Units)

EA 1 ____ ____

82. FA Installation EA 1 ____ ____

83. Hybrid System Installation EA 1 ____ ____

Hybrid

84. Hybrid System EA 1 ____ ____

A. 12 Volt DC Electric Motor coupled to Hydraulic Pump (ePTO). Installed on unit pedestal with steel guard to protect the electric motor.

B. Recharge Systems: A plug-in charge location is provided as standard on the streetside front of body (charging cord is provided). Batteries are recharged when plugged into a dedicated 30Amp 120VAC circuit. Drive cycle charge provides at least 50Amps of charge from the chassis alternator while driving. (NOTE: JEMS DC Drive requires a inverter/charger for plug-in charging.)

Item Description Units Qty Yes No

C. The JEMS control module (JCM) monitors and manages the JEMS DC Drive System. When the JEMS DC battery voltage drops below 10.5 Volts, the JCM attempts to automatically start the chassis to recharge the batteries. The batteries will continue to charge until the voltage reaches

13.5 Volts.

D. A cab-installed battery charge indicator provides JEMS DC Drive battery charge levels. The indicator will flash while the JCM automatically starts the chassis to recharge the batteries and continue flashing until the batteries reach 13.5 Volts.

E. On-Demand Operation: When the Master switch is turned ON, the JEMS DC Drive system is activated and the JCM manages the start/stop of the chassis engine. ePTO operation is available when the upper or lower control safety interlock has been satisfied.

F. Integral safety interlocks ensure that the following conditions must be met prior to unit operation: chassis in park, parking brake set, and a demand is created either through activation of the upper or lower control interlock.

G. Integral safety interlocks ensure that the vehicle auto-start will only be initiated when the hood is closed.

85. ePTO, 2.5 GPM, Mounted on Unit Pedestal EA 1 ____ ____

86. Hybrid System Control Module with Built-In Generator Select Mode EA 1 ____ ____

87. Two (2) Group 8D Sealed AGM Batteries EA 1 ____ ____

88. Hybrid System Battery Enclosure, Battery Storage Integrated into Tailshelf Assembly

EA 1 ____ ____

89. No Cab Comfort EA 1 ____ ____

90. Mobile / Jobsite Charging, Chassis Alternator, Ford Chassis EA 1 ____ ____

Chassis

91. Chassis EA 1 ____ ____

92. CHASSIS MODEL EA 1 ____ ____

93. 2025 Model Year EA 1 ____ ____

94. Ford F450 EA 1 ____ ____

95. Dual Rear Wheel EA 1 ____ ____

96. 4x2 EA 1 ____ ____

97. Chassis Cab EA 1 ____ ____

98. Regular Cab EA 1 ____ ____

99. Chassis Color - White EA 1 ____ ____

Item Description Units Qty Yes No

100. AM/FM Radio EA 1 ____ ____

101. Side Mirrors, Power Adjusting, Manual Folding, Manual Telescoping with Heated Glass

EA 1 ____ ____

102. Snow Plow Package EA 1 ____ ____

103. 12V DC Power Outlet EA 1 ____ ____

104. Air Conditioning EA 1 ____ ____

105. Cruise Control EA 1 ____ ____

106. Keyless Entry EA 1 ____ ____

107. Power Door Locks EA 1 ____ ____

108. Power Windows EA 1 ____ ____

109. 60 Clear CA (Round To Next Whole Number) EA 1 ____ ____

110. Chassis Wheelbase Length - 145 EA 1 ____ ____

111. GVWR 16,500 LBS EA 1 ____ ____

112. 7,000 LBS Front GAWR EA 1 ____ ____

113. 12,880 LBS Rear GAWR EA 1 ____ ____

114. Spring Suspension EA 1 ____ ____

115. Ford Gas 7.3L EA 1 ____ ____

116. Gas EA 1 ____ ____

117. Ford Torqshift 10-Speed Automatic Transmission (w/PTO Provision) EA 1 ____ ____

118. Ford 40 Gallon Fuel Tank (Rear) EA 1 ____ ____

119. Ford E/F250-550 Single Horizontal Right Side Exhaust EA 1 ____ ____

120. EPA Emissions EA 1 ____ ____

121. No Idle Engine Shut-Down Required EA 1 ____ ____

122. Hydraulic Brakes EA 1 ____ ____

123. Park Brake In Rear Wheels EA 1 ____ ____

124. Single Alternator (220 amp Minimum) EA 1 ____ ____

Item Description Units Qty Yes No

125. 63C - Aft Axle Frame Extension EA 1 ____ ____

Additional Pricing

126. Warranty: One (1) year parts warranty, one (1) year labor warranty, ninety (90) days warranty for travel charges, limited lifetime structural warranty

EA 1 ____ ____

Miscellaneous

127. Ext Warranty, TLME, 2 Year Total (1 Year Extended), Category 1 EA 1 ____ ____

USE OF OTHER NAMES AND REFERENCES:

Unless otherwise stated, the use of manufacturer's name and product numbers are for descriptive purposes and establishing general quality levels only. They are not intended to be restrictive. Bidders are required to state exactly what they intend to furnish, otherwise, it is fully understood that they shall furnish all items stated.

BROCHURES AND LITERATURE:

Your proposal must be accompanied by descriptive literature (marked), indicating the exact items to be furnished.

The term "as specified" will not be acceptable.