SECTION J ATTACHMENTS.pdf
PDF 255 KB Posted
- Attached to
- ROUND METAL BAR
- Solicitation number
- SPMYM226Q7775
About this file
This document is a Contract Data Requirements List (DD Form 1423-1) specifying data delivery requirements for a round metal bar procurement.
The contract requires submission of a Certification Data Report documenting chemical and mechanical (physical) properties for nickel-copper-aluminum alloy (UNS N05500) material per specification QQ-N-286G dated December 7, 2000. The material is a 6-inch diameter round metal bar in annealed and age-hardened condition with hot-finished surface, delivered as one 10-foot length. The contractor must provide actual values for chemical composition, ensure certifications are traceable to material via unique markings, and perform product check analysis. Required testing includes ultrasonic inspection, slow strain rate tensile testing (to be performed by laboratories listed in the solicitation), and mechanical testing per Section 4.3.2. The final heat treatment procedure must comply with Section 4.3.6, and packaging, packing, and marking requirements must follow MIL-STD-129 with reference to DLA Procurement Note C20. Certification documentation shall be submitted via the Wide Area Workflow (WAWF) e-Business Suite with one copy in final form. Acceptance or rejection of the certification documentation will occur concurrently with material acceptance and not prior to shipment. The distribution statement limits distribution to DoD and DoD contractors only for administration and operations, effective July 15, 2026, with other U.S. requests referred to COMNAVSEASYSCOM. The document was prepared by Brian Parker and approved by Willie Leach on July 15, 2026 (Document No. 6195-7915, IDN N4523A).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM226Q7775 ROUND METAL BAR.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST Form Approved
(1 Data Item) OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization.
Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP TM OTHER
MISC
X
D. SYSTEM|ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE
GROUP
CERTIFICATION DATA REPORT CHEMICAL AND MECHANICAL
(PHYSICAL) PROPERTIES
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED
TOTAL PRICE
DI-MISC-82386 PER CONTRACT PURCHASING ACTIVITY
7. DD 250 REQ 9. DIST STATEMENT
REQUIRED
10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION
DD ONE/R SEE BLOCK 16 b. COPIES
8. APP CODE D 11. AS OF DATE 13. DATE OF SUBSEQUENT
SUBMISSION
a. ADDRESSEE DRAFT FINAL
N/A N/A N/A Reg Repr o
16. REMARKS N4523A 0 1 0
Block 4: Tailored to allow the vendor to only provide requirements: 2, 3, 4-Provide actual values IAW procurement specification, 5-Ensure certs provided are traceable to material via unique markings and 9.
Block 9: Distribution Statement D. Distribution authorized to DoD and DoD contractors only.
Administration and operations only, effective 7/15/2026. Other U.S. requests shall be referred to COMNAVSEASYSCOM.
Block 12 - Certification/Data Report documentation shall be attached in the Wide Area Workflow (WAWF) e-Business Suite. Acceptance/Rejection of Certification/Data Report documentation will be accomplished with the corresponding material and will not be accomplished prior to shipment of material.
Document No.: 6195-7915 15. Total 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
/s/ PARKER, BRIAN 7/15/2026 /s/ LEACH, WILLIE 7/15/2026
DD FORM 1423-1, FEB 2001 Page 1 of 1 Pages
0002AA A
ROUND METAL BAR
A001
MATERIAL ORDERING DATA
QQ-N-286
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6195-7915
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. TITLE: NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) QQ-N-286G, dated 07
DECEMBER 2000
B. Form: 2 Condition: ANNEALED & AGE HARDENED. Surface finish: HOT FINISHED
C. Current issue of DODISS and individual documents referenced is to be cited.
D. Forging sketch required: N/A
E. Size required: 6” DIA.
F. Product check analysis required: Yes.
G. When hardness measurements may be utilized for forged rings and discs: N/A
H. When tolerances other than those specified are permitted: N/A
I. Ultrasonic inspection is required.
J. Liquid penetration is not test required.
K. The lengths required and whether cut-to-length, random mill lengths, nominal (stock) lengths, or multiples of specified lengths: ONE - 10 FOOT LENGTH
L. If multiples of a specified length are ordered, whether a ¼ inch allowance should be made for each cut:
N/A
M. If edges are other than specified: N/A
N. Forging dimensions: N/A
O. If marking should be other than specified: PER THIS SPECIFICATION IN ADDITION TO CONTRACT
REQUIREMENTS.
P. When mechanical test are required for rod and bar intended for reforming: PER SECTION 4.3.2
Q. If mechanical testing is to be done on material ordered in the unaged condition, to demonstrate its capability of being aged to meet the required mechanical properties, and, if desired, the heat treating procedure to be used on the test specimens: N/A
R. The final heat treatment procedure to be used on the lot before being placed into service and on the slow strain rate tensile test specimens: PER SECTION 4.3.6
S. Slow strain rate tensile test is required. Slow strain rate tensile test shall be performed by one of the laboratories listed in the solicitation.
T. Packaging, packing, and marking requirements: PER MIL-STD-129
Additional Data Requirements:
MATERIAL ORDERING DATA
QQ-N-286
Grade 500 (nickel-copper-aluminum) material shall comply with the Slow Strain Rate Tensile Test of QQ-N-286G, dated 7 Dec. 2000.
All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129 Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Material and Technical Support Branch
Code: 244.4
| 6195-7915 ~ CHEMICAL and MECHANICAL CDRL.pdf |
| 6195-7915 - QQ-N-286 - NICKEL COPPER ALUMINUM - ORDERING DATA.pdf |
File details come from the government source that posted it. Updated .