SE061-AA-MMC-010_1_0 AUG.pdf

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS FOR THE PURPOSES OF ACCOMPLISHING REPAIR, REPLACEMENT, MAINTENANCE, OVERHAUL, OR MODIFICATION. (JANUARY 2013). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO MILITARY SEALIFT

COMMAND.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979 (TITLE 50, U.S.C., APP. 2401 ET SEQ.), AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL

PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

PUBLISHED BY DIRECTION OF COMMANDER MILITARY SEALIFT COMMAND

0910LP119-4197

SE061-AA-MMC-010

REVISION 1

TECHNICAL MANUAL

SURVIVAL RADIO

SAILOR SP3520 VHF GMDSS

FOR

MILITARY SEALIFT COMMAND

INSTALLATION, OPERATIONS AND MAINTENANCE MANUAL

(COBHAM)

LYNGBY, DENMARK

N00024-16-C-2229

SUPERSEDURE NOTICE: THIS MANUAL SUPERSEDES SE061-AA-MMC-010,

DATED 14 NOV 2013 AND ALL CHANGES THERETO.

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS FOR THE PURPOSES OF ACCOMPLISHING REPAIR, REPLACEMENT, MAINTENANCE, OVERHAUL, OR MODIFICATION. (JANUARY 2013). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO MILITARY SEALIFT

COMMAND.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979 (TITLE 50, U.S.C., APP. 2401 ET SEQ.), AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL

PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

PUBLISHED BY DIRECTION OF COMMANDER MILITARY SEALIFT COMMAND

31 AUGUST 2020

0910-LP-119-4197

SE061-AA-MMC-010

REVISION 1

TECHNICAL MANUAL

SURVIVAL RADIO

SAILOR SP3520 VHF GMDSS

FOR

MILITARY SEALIFT COMMAND

INSTALLATION, OPERATIONS AND MAINTENANCE MANUAL

(COBHAM)

LYNGBY, DENMARK

N00024-16-C-2229

SUPERSEDURE NOTICE: THIS MANUAL SUPERSEDES SE061-AA-MMC-010,

DATED 14 NOV 2013 AND ALL CHANGES THERETO.

SE061-AA-MMC-010

REVISION 1

* Zero in this column indicates an original page

A

LIST OF EFFECTIVE PAGES

Date of original pages is: 14 May 2013 Revision 1: 31 August 2020

Total number of pages in this publication is 48 consisting of the following:

Page No. * Change No. Page No. * Change No.

Title/A B (Foreword)

TOC pgs i/ii Safety Summary pgs iii/iv User Manual pgs, 1 thru 40

C (OEM Information)

TMIN

FOREWORD

Each OEMNendor Manual is inserted into a separate section(s) when applicable.

OEMNendor document Table of Contents and page numbers are removed for clarity.

B

FOREWORD

B

Each OEM/Vendor Manual is inserted into a separate section(s) when applicable.

OEM/Vendor document Table of Contents and page numbers are removed for clarity.

SE061AA-MMC-010

SE109-AY-MMC-010

REVISION 2

OEM INFORMATION

Manufacturer:

Cobham

Lundtoftegaardsvej 93 D

Lyngby 2800 Denmark

Cage Code R3323

Phone: 39558800

Website: cobham.com

CAGE: R3323

United States Manufacturing Support:

Cobham

4030 Nelson Ave, Concord Ca. 94520

Phone: 1 925 7987979

Website: cobham.com

CAGE: 2J627

SE109-AY-MMC-010

REVISION 2

OEM INFORMATION

Manufacturer:

Cobham

Lundtoftegaardsvej 93 D

Lyngby 2800 Denmark

Cage Code R3323

Phone: 39558800

Website: cobham.com

CAGE: R3323

United States Manufacturing Support:

Cobham

4030 Nelson Ave, Concord Ca. 94520

Phone: 1 925 7987979

Website: cobham.com

CAGE: 2J627

OEM INFORMATION

C

Manufacturer:

Cobham

Lundtoftegaardsvej 93 D

Lyngby 2800 Denmark

Cage Code R3323

Phone: 39558800

Website: cobham.com

CAGE: R3323

United States Manufacturing Support:

Raytheon Integrated Defense Systems

8680 Balboa Av.

San Diego Ca. 92123

Phone: 1 (858) 552-3000

Website: raytheon.com

CAGE: 3J458

SE061AAMMC010

Table of Contents

Title Page i

SAFETY SUMMARY .................................................................................................... ix

SAILOR SP3520 VHF GMDSS USER MANUAL

Emergency procedure

SP3520 VHF GMDSS

Precautions Training information

CHAPTER 1

Introduction Your VHF GMDSS Performance Channels

CHAPTER 2

Operation Controls Keys and Buttons Key presses The Display Using the VHF GMDSS Basic Functions Other Functions Configuring the VHF GMDSS Entering and Using Configuration Mode Configuration Settings

CHAPTER 3

Batteries Battery Types The Primary Battery The Secondary Battery Battery Level Indication Removing and Inserting the Battery Pack The Battery Charger Installing the Charger Recharging the Secondary Battery

CHAPTER 4

Equipment and Accessories External Equipment

Table of Contents

Title Page ii

List of Equipment Connecting External Equipment Impact on Radio Operation Accessories List of Accessories

CHAPTER 5

Troubleshooting Displaying Errors

APPENDIX A

Technical Specifications Technical Data SP3520 General Transmitter Receiver Battery Life Guideline Primary Battery (Non-Rechargeable) Secondary Battery (Rechargeable) Dimensional Drawing, Transceiver Dimensional Drawing, Charger Mounting possibilities

APPENDIX B

Attention

SAFETY SUMMARY

GENERAL SAFETY NOTICES

The following are general safety precautions that are not related to specific procedures and, therefore, do not appear elsewhere in this publication. These are recommended precautions that personnel must understand and apply during many phases of operation and maintenance. Personnel responsible for the equipment should become thoroughly familiar with and frequently review the following information. Should situations arise that are not covered in the general safety precautions, a necessary order will be issued by the commanding officer or other authority.

DO NOT SERVICE OR ADJUST ALONE

Under no circumstances should any person reach into or enter the enclosure for the purpose of servicing or adjusting the equipment, except in the presence of someone who is capable of rendering aid.

RESUSCITATION

Personnel working with or near high voltages should be familiar with modern methods of resuscitation. If someone is injured and stops breathing, initiate resuscitation immediately. A delay could cost the victim’s life.

TAGGING OPEN SWITCHES

De-energize, disconnect and tag OUT OF SERVICE all sources of power before working on equipment. High Voltage, High Capacitance components shall be discharged to ground to prevent personnel injury or death. All tag out procedures shall be performed in accordance with current switchboard instructions to prevent personnel injury or death.

Before working on electrical equipment, use a voltmeter to ensure that system is not energized.

TEST EQUIPMENT

Make certain that test equipment is in good working condition. If a test meter must be held, ground the case of the meter before starting measurement. Do not touch equipment or personnel working on live equipment while holding a test meter. Some types of measuring devices should not be grounded; these devices should not be held when taking measurements. When connecting a meter to terminals for measurements, use a range higher than expected.

iii

THIS PAGE INTENTIONALLY LEFT BLANK

iv

SAILOR SP3520 VHF GMDSS

USER MANUAL SAILOR®

1 REVISION 1

THIS PAGE INTENTIONALLY LEFT BLANK THIS PAGE INTENTIONALLY LEFT BLANK

2REVISION 1

Emergency procedure

• Remove the top-seal of the yellow emergency battery package.

• Insert the battery package into the handheld transceiver.

• Turn the knob at the top of the radio clockwise. The display lights up showing the last used channel and the battery level.

• Select channel 16 (Distress or Safety), press the 16/C key.

• Press the PTT and say:

— "MAYDAY, MAYDAY, MAYDAY",

— "This is" ships name repeated three times

— "MAYDAY"

— "This is" ships name and call sign,

— The ship's position in latitude and longitude or other reference to a known geographical location,

— The nature of distress and assistance wanted,

— Any other information which might facilitate the rescue.

— "OVER"

• Release PTT and listen for answer.

3 3 REVISION 1

SP3520 VHF GMDSS

Document number: TT 98-124294-E

Release date: Ferbruary, 2008

Copyright: © 2008 Thrane & Thrane A/S. All rights reserved.

Trademark Acknowledgements

• SAILOR is a registered trademark of Thrane & Thrane A/S.

• Other product and company names mentioned in this manual may be trademarks or trade names of their respective owners.

Warranty limitation

IMPORTANT - The radio is a sealed waterproof unit. To create and maintain its waterproof integrity it was assembled in a controlled environment using special equipment. The radio is not a user maintainable unit, and under no circumstances should the unit be opened except by authorized personnel. Unauthorized opening of the unit will invalidate the warranty.

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by Thrane & Thrane.

The information in this manual is provided for information purposes only, is subject to change without notice, may contain errors or inaccuracies, and represents no commitment whatsoever by Thrane & Thrane. This agreement is governed by the laws of Denmark.

Manuals issued by Thrane & Thrane are periodically revised and updated. Anyone relying on this information should satisfy himself/herself as to the most current version. Providers with access to Thrane & Thrane's Extranet may obtain current copies of manuals at: http://extranet.thrane.com

Thrane & Thrane is not responsible for the content or accuracy of any translations or reproductions, in whole or in part, of this manual from any other source.

4 4REVISION 1

SP3520 VHF GMDSS

Document number: TT 98-124294-F

Release date: November, 2009

Copyright: © 2009 Thrane & Thrane A/S. All rights reserved.

Trademark Acknowledgements

• SAILOR is a registered trademark of Thrane & Thrane A/S.

• Other product and company names mentioned in this manual may be trademarks or trade names of their respective owners.

Warranty limitation

IMPORTANT - The radio is a sealed waterproof unit. To create and maintain its waterproof integrity it was assembled in a controlled environment using special equipment. The radio is not a user maintainable unit, and under no circumstances should the unit be opened except by authorized personnel. Unauthorized opening of the unit will invalidate the warranty.

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by Thrane & Thrane.

The information in this manual is provided for information purposes only, is subject to change without notice, may contain errors or inaccuracies, and represents no commitment whatsoever by Thrane & Thrane. This agreement is governed by the laws of Denmark.

Manuals issued by Thrane & Thrane are periodically revised and updated. Anyone relying on this information should satisfy himself/herself as to the most current version. Providers with access to Thrane & Thrane's Extranet may obtain current copies of manuals at: http://extranet.thrane.com

Thrane & Thrane is not responsible for the content or accuracy of any translations or reproductions, in whole or in part, of this manual from any other source.

5 5 REVISION 1

Precautions

Avoid water and salt in the I/O connector and keep it clean frequently.

Only use original Thrane & Thrane battery packs. Make sure they are clean and dry before attaching the transceiver. Be careful not to damage any gaskets.

Only use the original Thrane & Thrane charger for the rechargeable battery.

Be very careful when handling the Lithium batteries.

With correct use they are safe but any misuse might cause dangerous situations.

Never short circuit the battery terminals, never expose the transceiver and the batteries to extreme temperature or fire and never use any kind of violence.

Avoid close contact between the antenna and parts of the human body. The top of the antenna must never be closer than 5 cm to the body when transmitting.

Do not submerge the transceiver more than 1 m for 30 minutes.

Keep the transceiver at least 0.3 m away from the magnetic compass.

6 6REVISION 1

Training information

SAILOR SP3520 VHF GMDSS is designed for "occupational use only". It must be operated by licensed personnel only.

The SP3520 complies with the FCC RF exposure limits for "Occupational Use Only".

• FCC OET Bulletin 65 Supplement C, evaluating compliance with FCC guidelines for human exposure to radio frequency electromagnetic fields.

• American National Standards Institute (C95.1) IEEE standard for safety levels with respect to human exposure to radio frequency electromagnetic fields, 3 kHz to 300 GHz.

• American National Standards Institute (C95.3) IEEE recommended practice for the measurement of potentially hazardous electromagnetic fields - RF and microwaves.

A Warning! Your Thrane & Thrane VHF radio generates electromagnetic RF (radio frequency) energy when transmitting. To ensure that you are not exposed to excessive amounts of energy and thus to avoid health hazards from excessive exposure to RF energy, all persons must be at least 5 cm away from the antenna when the radio is transmitting.

Correct use

For best performance, hold the radio vertically and 10 cm away from the head when talking into the microphone.

7 7 REVISION 1

THIS PAGE INTENTIONALLY LEFT BLANK THIS PAGE INTENTIONALLY LEFT BLANK

8REVISION 1

Chapter 1

Introduction

Your VHF GMDSS

5P3520, your new SAILOR portable VHF transceiver, is approved to fulfil the GMDSS requirements for portable VHF radios for Safety at Sea and is waterproof to the IP67 standard.

As part of the required safety equipment, the SAILOR 5P3520 is to be used in an emergency situation. However the best way to guarantee functionality in an emergency situation, is to use the radio in daily communication on board.

The SP3520 is designed for daily use and it connects easily to external equipment like headsets and fist mikes, making the SP3520 suitable for any noisy environment.

The unique battery concept makes the radio suited for both daily use and emergency situations. The primary emergency battery is to be stored for emergency situations and a secondary rechargeable battery can be used for daily communication in your new portable VHF transceiver.

The radio is designed with a unique man machine interface, an excellent grip even with gloves, and large tactile buttons.

9 9 REVISION 1

Introduction

The display has red adjustable backlight which makes the display visible even at night.

The radio is equipped with a lanyard and a belt clip. A huge accessory program comes with the SAILOR SP3500 series.

Please find the nearest SAILOR distributor on www.thrane.com.

Performance

For best performance of the transceiver keep the following in mind:

• Keep clear of metal environment.

• Hold the transceiver vertically and 10 cm from lips and push the PTT when transmitting.

• In receive mode carry the transceiver vertically with belt clips.

• To preserve battery power, adjust squelch to close the loudspeaker when there is no signal.

• If you are in a lifeboat keep the antenna as high as possible.

Channels

This radio operates with the following channels:

6 11 15 68 73 77

8 12 16 69 74 87

9 13 17 71 75 88

10 14 67 72 76

Notes:

• All channels are Simplex.

• Tx power is limited to 1W on channels 75 and 76.

10REVISION 1

Chapter 2

Operation

Controls

Keys and buttons

1. On/off/volume

2. Light/Lock

3. Push To Talk (PIT)

4. Up key

5. Down key

6. Hi/Lo output power

7. Squelch

8. Scan

9. Priority channel (16)/ Call channel

10. Loudspeaker/microphone

11 11 REVISION 1

Operation

Key presses

Pressing and holding certain keys gives access to additional functions, shown in the table below.

Key Short press

(1 beep) Long press (2 beeps)

Extra press long

(3 beeps) i4 item

IN Default:

Show next available in the list (up or down).

Channel selection

Run through available items, or select tagged channels A (V) or B (A). or B channel

Run through available items if an A is tagged

Activate Squelch control (Adjust with up/down arrows).

Monitor function. Open Squelch completely.

1 press: Activate/ terminate Dual/Triple watch.

2 presses: Activate memory scan.

Add/Delete channel from memory scan.

Hi/L0 Toggle between high and low transmitter power.

Select channel 16. Select programmed Call channel.

Program Call channel.

12REVISION 1

The display

The display holds various fields of information, explained below.

4 5 6

Lo Dual Mem rr0

1 I II / n

Int gmpf g m P 0 ° "•• E Am 4m

I e I-11 r I / LIL i

1. Current working channel.

2. Current channel mode.

3. "Lo": Reduced transmitter power.

Full transmitter power is not shown in display.

4. Dual watch activated.

5. Current working channel is marked for scanning.

6. Keypad is locked.

7. Battery level indicator.

8. Transmitting (Tx) /Receiving (Rx).

9. Accessory is connected.

10. Service line for various purposes. In this example the volume level.

13 REVISION 1

Using the VHF GMDSS

Basic functions

Before using the radio, mount the antenna at the top of the radio. The antenna is delivered with the radio.

Note

Switching the radio on and off

• To switch the radio on, turn the knob at the top of the radio clockwise.

The display lights up showing the last used channel and the battery level.

• To switch the radio off, Turn the knob back counter-clockwise until it clicks.

Selecting the working channel

• To select channel 16 (Distress or Safety), press the 16/C key.

• To select the Call channel, use a long press on 16/C.

• To select among all available channels, press A or V on the keypad.

For fast selection, press and hold A or V.

The display shows the currently selected channel.

Long press on A or V can also be used to select preferred channels. For information on how to program preferred channels, see Configuring the VHF GMD55on page 10.

14REVISION 1

Activating a call

To activate a call to the selected channel, press and hold the PTT button on the side of the radio.

The radio transmits as long as the PTT button is pressed. A small Tx sign next to the channel num-ber indicates when the radio is in transmit mode.

Adjusting the volume

• To increase the volume, turn the on/off knob at the top of the radio clockwise.

• To decrease the volume, turn the knob counter-clockwise.

The display shows the level of the volume, e.g. "VOL 5", while it is adjusted.

Using Squelch control

• To activate Squelch control, press the SQ key.

• To set the Squelch level, press A (closing) or V (opening). The display shows the Squelch level while it is adjusted, e.g. "SQ 5".

Adjusting the display backlight

• To turn on the backlight, press the

Light/Lock button on the side of the radio.

• To adjust the backlight level, press A or V within 3 seconds after turning on the light.

The display shows the level while it is adjusted, e.g. "DIM MED".

L I la

15 REVISION 1

Using Dual watch

To activate Dual watch, press the SCN key.

The display shows "Dual" at the top and "16" at the bottom right.

The radio toggles between the selected channel and channel 16.

• To terminate Dual watch, press SCN again.

Scanning channels

• To activate scanning memory, press 2 times SCN within 2 seconds.

During scanning, the display shows "SC" in the channel field. The radio toggles between channel 16 and each of the channels marked for scanning.

• To terminate scanning, press SCN once.

Changing the transmitter power

To change the transmitter power, press the Hi/Lo key. The display shows

"Lo" when power is set to low. Otherwise maximum power is used.

Locking the keypad

• To lock the keypad, press and hold the Light/Lock button. The display shows a key symbol when the keypad is locked.

• To unlock the keypad, press and hold the Light/Lock button again.

16REVISION 1

Other functions

Programming the Call channel

To program the Call channel, do as follows:

1. Press and hold 16/C until the current Call channel number is flashing.

2. Select the channel with A or V.

3. Press 16/C to confirm.

Programming the scanning memory

To add a channel to the scanning memory, select the channel and then press and hold the SCN key until the display shows MEM at the top.

To remove a channel from the scanning memory, select the channel and then press and hold the SCN key until the MEM sign disappears from the display.

17 REVISION 1

Configuring the VHF GMDSS

Entering and using configuration mode

Note The radio is not operational in configuration mode.

• To enter configuration mode, press and hold the Light/Lock button while turning on the radio.

The bottom line of the display shows the current menu item/setting.

• To exit configuration mode, turn off the radio or press any key except A, V and the Light/Lock button.

Using the PTT button or leaving the radio inactive for 10 seconds also causes the radio to exit configuration mode.

• To change a setting, press A or V.

• To confirm the current setting and go to the next menu item, press the Light/Lock button.

18 18REVISION 1

Configuration settings

Configuration mode is used to program preferred channels and volume of key beep and battery alarm.

The following settings are available in configuration mode.

BEEP MAX Status click/beep sound on key press, long press (settings/programming saved) and battery alarm. Maximum level.

MIN Status click/beep sound on key press, long press (settings/programming saved) and battery alarm. Minimum level.

OFF All beeps off.

PREFA OFF Remove tag "A" for current working channel.

ON Tag current working channel with "A". If another channel was previously tagged "A", this is overruled.

• The working channel can now be selected with a long press on T.

PREFB OFF Remove tag "B" for current working channel.

ON Tag current working channel with "B". If another channel was previously tagged "B", this is overruled.

• The working channel can now be selected with a long press on A.

VER X.XX.XX Software version. Read-only.

19 19 REVISION 1

20 20REVISION 1

Chapter 3

Batteries Battery types

• The yellow primary battery pack contains a non-rechargeable Lithium battery. This battery pack is only to be used in case of emergency.

• The black secondary battery pack contains a rechargeable battery.

This battery pack is for daily use.

The primary battery

The yellow primary battery pack is only for emergency use, and is not rechargeable.

Important

Before using the primary battery, remove the seal on the battery pack.

Then do as follows:

1. Attach the battery pack to the radio as shown.

2. Lock the battery with the safety lock at the bottom.

The primary battery is capable of providing sufficient power for 8 hours of operation defined as 10% Tx, 10% Rx and 80% standby.

When the primary pack is not in use it must always be placed in the dedicated rear position in the charger cradle, see The battery chargeron page 15.

21 21 REVISION 1

The secondary battery

Battery level indication

The black secondary battery pack is for daily use of the radio. When the battery level is low, you should recharge the battery.

The radio display shows the battery status. When the battery symbol is empty and flashing, the battery should be recharged as soon as possible.

Int

Removing and inserting the battery pack

To remove the battery pack, do as follows:

1. Open the safety lock as shown.

2. Remove the battery.

To insert the battery pack, attach the battery and close the safety lock as shown on the previous page.

22 22REVISION 1

The battery charger

The chargers has two compartments.

CH3507

• A rear compartment only for storing a spare battery. It does not have a charger function.

• A front compartment for recharging the battery alone or while attached to the radio.

CH3508

• It is possible to charge a battery in rear compartment simultaneously with the radio/battery in front.

Installing the charger

Mounting the charger

There are several options for mounting one or more chargers on a table or a wall.

For information on dimensions and screw positions, refer to Dimensional drawing, chargeron page 27.

When mounting the charger, make sure it is placed in a dry place and away from direct sunlight. The charger is not waterproof.

23 REVISION 1

IA in r• i i n _ .

Int

Batteries

Connecting to power

The charger can be supplied with DC or AC.

DC: Connect the 12-24VDC Connection Cable between the DC supply and the connector on the underside of the charger.

AC: Connect the AC/DC adapter to the connector on the underside of the charger. Then connect the AC/DC adapter to the AC outlet.

Recharging the secondary battery

Important Do not attempt to recharge the yellow primary battery!

To recharge the secondary battery, place the radio with battery or the battery alone in the front position of the charger cradle.

If the radio cannot turn on due to complete discharged battery, then turn of the radio and place it in the charger or charge the battery alone.

The light indicators on the charger cradle show the status as follows:

• Green light: Power is connected to the charger.

• Slow red flash: Charging in progress.

• Quick red flash (twice per second): Charging error, e.g. battery defect or temperature out of range.

• Steady red light: Charging completed. Trickle charge mode.

Charging time with emtpy battery: VHF off approx. 4 hours, VHF on: approx. 5 hours.

The battery indicator on the radio display indicates if the radio is placed in the charger while radio and charger are both powered.

24 24REVISION 1

Chapter 4

Equipment and accessories

External equipment

List of equipment

The following equipment can be connected to the radio:

• SAVOX 400E Push-To Talk unit

• SAVOX C500 Fist Mike

• SAVOX NC/400 Noise-com

• SAVOX HC-E Helmet-corn

• SAVOX K53004 Helmet unit

• Peltor MT7H79 Headset

We recommend to remove all accessories during emergency use.

All accessories listed might be used when body worn.

Connecting external equipment

Connect the dedicated interface cable between the external equipment and the top connector on the radio.

Interface cable Order number

For SAVOX 400E 403500-940

For SAVOX C500 403500-950

For Peltor FL5061 403500-951

25 REVISION 1

Int c.)

Equipment and accessories

When external equipment is connected to the radio, the right side of the display will show a headset.

Impact on radio operation

The external equipment can have a built-in PTT button, speaker and microphone. Thus a connection has per default the following impact on the radio operation:

• If a speaker or earpiece is built into the detected external equipment, the sound device of the external equipment is used, and the internal radio speaker is disabled.

• The external accessory microphone is selected as audio input device, when the external PTT button is pressed. The transceiver microphone is used as audio input device when the transceiver PTT button is pressed.

• This behaviour can be changed in the service tool.

Accessorie connector

Pin 1. Loudspeaker, minimum 8 ohm impedance.

Pin 2. Accessory power, 5V maximum 0.03A.

Pin 3. Microphone input, Ri = 2.2kohm, 3V phantom power.

Pin 4. GND

26REVISION 1

Accessories

List of accessories

The following accessories are delivered with your radio:

Accessory Part number

Primary battery (yellow, non-rechargeable), B3501 403501A

Secondary battery (black, rechargeable), B3502 403502A

Charger, CH3507 403507A

AC/DC converter, length 150cm (100-240V— /12VDC out) 88-125538

12-24VDC Connection cable, length 150cm 37-124381

Belt clip 62-124320

Antenna 88-124370

Lanyard 41-124375

User Manual (this manual) 98-124294

Batteries, charger, AC/DC Converter and 12VDC Connection are described in Batteries on page 13.

To mount the antenna, simply screw it into the threaded bush at the top of the radio.

Use of lanyard is only for hand held operation. Put it around the wrist to prevent dropping the radio.

27 27 REVISION 1

Accessories you may buy

Accessory Part number

Dual Position Charger CH3508 403508A

Leather Case 403500-205

Leather Case

Warning!

The display must always be kept away from the body to reduce the RF exposure when body worn.

28REVISION 1

Attaching and removing the belt clip

To attach the belt clip, slide the belt clip upwards into the rails at the back of the radio until it locks.

To remove the belt clip, press the projection at the top of the belt clip to release the lock and slide the belt clip downwards out of the rails.

Release lock

Attaching the lanyard

Do as follows:

L Take the lanyard through the eye at the top of the radio.

2. Put one end of the lanyard through the loop at the other end of the lanyard and pull to tighten.

29 REVISION 1

30 30REVISION 1

Chapter 5

Troubleshooting

Displaying errors

Some errors result in an error message in the display. These error messages are listed below.

Display text Problem Type Actions

The battery voltage is below a critical level, where further operation would damage the battery.

Severe.

Radio is non-functional.

Change/recharge the battery. Err

EMPTY BAT

Hardware error. Severe.

Radio is non-functional.

Service required.

Err

HW ERR

ILLEGAL

Context fails operation.

This text will appear on the following occasions:

• Multiple watch is selected on channel 16, or in channel regions where it is not allowed.

• High power is selected on a channel where it is prohibited.

• Transmission on blocked channels

Fail operation

Consider operation in a different context.

31 REVISION 1

Troubleshooting

32 32REVISION 1

Appendix A

Technical specifications

Technical data SP3520

General

Item Specification

RX frequency range 155.000 - 163.425 MHz

TX frequency range 155.000 - 161.450 MHz

Modulation 16KOG3E

Power supply 7.2 VDC Li battery

Current drain at 2 W TX 1.4 A

Current drain at 1W TX 0.8A

Current drain RX max audio 0.25 A

Antenna port 50 ohm

Primary Battery Lithium Iron Disulfide, 3000 mAh

Secondary Battery Lithium-Ion, 1800 mAh rechargeable

Operating temperature -20°C to +55° C

Water ingress protection IP67

Frequency stability Better than ±0.7 kHz

Weight with emergency battery 340g

33 REVISION 1

Transmitter

Item Specification

RF output power 2W/1W

RF output power, Canada 2.5 W ±1 dB I 0.75 W ±1 dB

Max deviation ±5 kHz

Spurious emission < 0.25 uW

Adjacent channel power > 70 dB

Receiver

Item Specification

Sensitivity (20 dB SINAD) -117 dBm typical

Intermodulation Better than 70 dB

Spurious response > 70 dB

Adjacent channel selectivity > 70 dB

Audio output, internal 0.25 W at 10% dist.

Audio output, external 0.25 W/8 ohm

34REVISION 1

Battery life guidelines

Primary battery (non-rechargeable)

The primary non-rechargeable battery pack is capable of providing sufficient power for the specified 8 hours according to regulations.

The battery is marked with an expiry date. Replace the battery at or before this date.

To ensure a long lifetime keep the battery in the store position in the charger and avoid high temperature and direct sunlight.

Secondary battery (rechargeable)

New batteries should be placed in the charger for minimum 12 hours first time.

During daily use, always keep the battery fully charged and away from hot areas.

Keep the battery terminals dry and clean.

Never discharge beyond the specifications of the battery.

Operation/Standby time depends on usage. Generally, the more the radio is transmitting, the faster it will drain the battery. Also, the "Hi" power setting will drain the battery faster than the "Lo" setting.

Approximate figures are:

• A battery can be stored for 4 to 6 month at 25°C if charged to 25%.

• The battery will normally last for 5 to 9 hours of use on a fully charged battery.

35 REVISION 1

Dimensional drawing, transceiver

36REVISION 1

Dimensional drawing, chargers

Mounting Possibillities Desktop mounting, top view Wall mounting, rear view

37 REVISION 1

38 38REVISION 1

Appendix B

Attention

Goretex Membran

To keep the VHF watertight, is it very important that the goretex membran behind the label under no circumstances must be damaged or removed.

39 REVISION 1

TT-98-124294-F Issue: F/0945

Thrane & Thrane A/S • info@thrane.com • www.thrane.com Thrane &Thrane

40 40REVISION 1

Ref: NAVSEAINST 4160.3 NAVSEA S0005-AA-PRO-010/TMMP

NAVSEA/SPAWAR TECHNICAL MANUAL DEFICIENCY/EVALUATION REPORT (TMDER)

INSTRUCTIONS: Continue on 8 ½” x 11” page if additional space is needed.

1. Use this report to indicate deficiencies, problems and recommendations relating to publications.

2. For NOFORN TMDERs mailing requirements, see OPNAVINST N9210.3.

3. For CLASSIFIED TMDERs mailing requirements, see SECNAV M-5510.36.

4. For TMDERs that affect more than one publication, submit a separate TMDER for each.

5. Submit TMDERs at web site https://nsdsa.dc3n.navy.mil or mail to: COMMANDING OFFICER, CODE 310 TMDERs, NAVSURFWARCENDIV NSDSA, 4363 MISSILE WAY BLDG 1389, PORT HUENEME CA 93043-4307

CLASSIFICATION

1. PUBLICATION NUMBER 2. VOL/PART 3. REV/DATE OR CHG/DATE 4. SYSTEM/EQUIPMENT ID

5. TITLE OF PUBLICATION 6. REPORT CONTROL NUMBER

(6 digit UIC-YY-any four: xxxxxx-10-xxxx)

7. RECOMMEND CHANGES TO PUBLICATION

7a. Page # 7b. Para # 7c. RECOMMENDED CHANGES AND REASONS

8. ORIGINATOR’S NAME AND WORK CENTER 9. DATE 10. ORIGINATOR’S E-MAIL ADDRESS 11. TMMA of Manual (NSDSA will complete)

12. SHIP OR ACTIVITY Name and Address (Include UIC/CAGE/HULL) 13. Phone Numbers:

Commercial ( ) -

DSN -

FAX ( ) -

NAVSEA 4160/1 (Rev. 5-2017) https://nsdsa.dc3n.navy.mil/

FOLD HERE AND TAPE SECURELY

PLEASE DO NOT STAPLE

INCLUDE COMPLETE ADDRESS

USE

PROPER

POSTAGE

FOR OFFICIAL USE ONLY

COMMANDING OFFICER

CODE 310 TMDERs

NAVSURFWARCENDIV NSDSA

4363 MISSILE WAY BLDG 1389

PORT HUENEME CA 93043-4307

FOLD HERE AND TAPE SECURELY

PLEASE DO NOT STAPLE

USER MANUAL