SDHP Base Layer Uniform Shirts Specifications.pdf
PDF 130 KB Posted
- Attached to
- Highway Patrol Uniforms
- Solicitation number
- 25IFB18456
- Issued by
- Harding County, South Dakota
About this file
This is a specification document for SDHP (South Dakota Highway Patrol) Base Layer Uniform Shirts detailing product requirements and construction standards. The specification covers two models of uniform shirts: short sleeve Spiewak SBL70SD and long sleeve Spiewak SBL75SD, both constructed from 75/25 poly/wool blend fabric with moisture-wicking and anti-bacterial properties. The garments are available in dark pink and tan colors and must meet precise tailoring standards including specific collar construction with hidden button-down tabs, one-piece tapered sleeves with pressed double pleats and 2-5/8" cuffs, and a 1-1/2" wide center front placket with three vertical buttonholes. The shirts are sized for both male and female personnel, with female bust sizes ranging from 30 through 48 (even sizes only) and male sizes from Small through XXXL, with detailed sizing charts provided for short and long sleeve options.
All construction must adhere to strict quality standards including proper stitch tension and size to prevent puckering after laundering, polyester core thread matching the shirt fabric, and reinforced seams using merrow and safety stitches. All buttons must be 100% polyester and pass ASTM 5171-1191 drop testing specifications. The specification requires vendors to sew an SDHP Agency emblem centered on each sleeve one inch down from the shoulder seam. Care instructions specify machine washing in warm water for dark colors, tumble drying on medium heat, and steam iron pressing under a cotton towel. The document does not specify pricing, quantities, delivery dates, or contract terms, indicating this is a technical specification document rather than a complete solicitation notice.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Special Conditions-Must Read.doc | DOC document | |
| SDVendorManual_20240822.pdf | ||
| SDHP Armor Vest Carrier Specifications.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SDHP BASE LAYER UNIFORM SHIRTS
Color: Dark Pink Tan
Models: Short Sleeve Spiewak SBL70SD (Poly/ Wool) Long Sleeve Spiewak SBL75SD (Poly/ Wool)
Style: The Uniform Shirt shall be constructed to give the appearance of a standard uniform shirt when worn with the External Vest Carrier with the body of the shirt to be made of anti-bacterial and moisture wicking knit mesh for comfort.
Tailoring: This garment shall be constructed according to the principles set forth in the specifications.
All stitches shall be of the proper tension and size so as to avoid puckering after the shirt has been laundered and to give best durable press performance.
All sewing shall be with polyester core thread to match the shirt fabric.
The collar shall be single stitched 1/4" from edge. The pockets, flaps and epaulets shall be edge stitched. The shirtsleeve bottom shall be finished with a 1” clean finished
Fabric: The primary shirt fabric shall be 75/25 Poly/ Wool w/ Nanotex designed for moisture wicking and soil resistance, excellent color retention and easy care.
Knit Mesh fabric shall be a S9T110 birdseye mesh with anti-bacterial and moisture wicking treatments.
Collar: The collar points shall be medium spread approximately 3" in length. The outside edge of the collar shall be stitched with a ¼” edge stitch. The collar width at the back of the neck shall be 1 ¾” with a 2” collar band extension. The back of the stand shall measure 1- 1/2". The inside collar stand shall be made of 201T Polyester for comfort.
There shall be a collar stay sewn inside the collar along the bottom edge of each collar to hold the collar shape and still allow the attachment of collar brass.
There shall be hidden triangle collar button-down tabs sewn underneath each collar point approximately 1” wide (at the attachment point) and 7/8” long. These tabs shall attach to hidden durable ligne 14 buttons which to keep the collar secure
Sleeves: The sleeves shall be one piece sewn into the shoulder, tapering into the finished cuffs with pressed double pleats. The cuffs shall be attached to the sleeve with a 3/8” double needle stitch and shall be 2-5/8" in width; fastening with two durable ligne 20 4 hole 100% polyester buttons. The cuffs shall be made of two pieces of base shirt material with an interlining.
There shall be a shirt cuff opening with a facing of shirt material 7” X 1” tapering to a point with a closure stitch across the facing 1 ½” from the point. There shall be a buttonhole approximately 4” from the point to attach a ligne 16 durable 100% polyester button. The button shall be attached to the inside facing which shall be bound with 5/8” bias cut shirt material for reinforcement.
The sleeves and side closing seams shall be attached to the body of the shirt with a merrow and a safety stitch for reinforcement.
Front: The front shall have a center facing 1-1/2" wide placket extending from the collar extending approximately 6” down the front of the shirt (based on size L). The placket shall have an interlining for stability and a neat appearance and shall be ¼” top stitched on each side.
The center front shall contain three (3) vertical buttonholes placed 3/4" from edge and 3" apart. There shall be a button at the neck corresponding with the top buttonhole, which shall be set horizontally.
Back: The garment shall have a straight yoke back located approximately 5” below the collar seam. There shall be an inside yoke lined with 210T Polyester for maximum comfort.
Button: All buttons shall be 100% Polyester and shall pass ASTM 5171-1191.84 kg mass dropped from a height of 67mm.
Emblems:
Vendor shall be responsible for sewing an SDHP Agency emblem centered on each sleeve ¾” down from shoulder seam.
Care Instructions:
Machine wash – warm water. Wash dark colors separately and rinse thoroughly. Tumble-dry completely – Medium heat – remove promptly. For best performance, use steam iron, low setting and iron under a cotton towel.
Female Shirt Sizes:
Female Bust Sizes: 30 thru 48 even sizes only
Male Shirt sizes:
Short Sleeve Sizes: S, M, L, XL, XXL, XXXL
L/S SIZE CHART
Small Medium Large X_LARGE
XX_LARGE
XXX-
LARGE
30/31 30/31 - - - - 32/33 32/33 32/33 32/33 32/33 - 34/35 34/35 34/35 34/35 34/35 34/35
- - 36/37 36/37 36/37 36/37
SDHP BASE LAYER UNIFORM SHIRTS
File details come from the government source that posted it. Updated .