The file's text, extracted by GovTribe without its formatting.
VETERANS ADMINISTRATION SW CMOP TUCSON
SCOPE OF WORK
PURCHASE OF BLACK TOTES/PADS/RFIDs
SUMMARY:
The SW CMOP here in Tucson currently has an urgent need to replace our current black totes, pads and some RFID chips for our conveyance system on unit of use production line at 3675 E. Britannia Drive, Tucson, AZ. The requirements will be listed in the Description of Product/Equipment listed below for the Tucson SW CMOP and must be the same as designed for the production line.
LOCATION:
TUCSON SW CMOP (Consolidated Mail Outpatient Pharmacy) located in Tucson, Arizona and is located at 3675 E. Britannia Drive, Tucson, Arizona, 85706
DESCRIPTION OF PRODUCT/EQUIPMENT:
Contractor shall furnish all labor, materials and equipment to provide:
| Qty |
| Part Number and Description |
| 850 |
| #1115 Black Totes (15"L x 11"W x 7-1/2"D with round molded center pocket that accepts RFID tag) |
| 850 |
| SBI-001 Foam pad (12-1/4"L x 8-1/2"W x 1/4"Thick) |
| 145 |
| 800-0074-02-CS-HT RFID Tags |
Programming to replace existing missing RFIDs: QTY 80
Programming new RFIDs: QTY 65 (Range 2749 through 2813)
All equipment, materials and workmanship shall meet all current industry standards, OSHA requirements, all current UPC, NFPA and NEC codes and all other applicable standards and all State and local codes as required.
QUALITY CONTROL:
The contractor will be responsible for the quality control of all products and equipment provided. All work must be performed in accordance with industry standards, and in compliance with all applicable codes and regulations. State, County, and local authority. No defects on delivered product and equipment will be accepted and will be returned to vendor where product shall be replaced with a non-defective product and/or equipment.
