Scope of Work 19302.pdf

20190522

Scope of Work

Gaylord FRD Field Office -Facelift Project

Siding, Doors, Windows, Soffit, Fascia, Trim

Project intent is to update the Gaylord Field Office exterior with durable, energy efficient and low maintenance exterior products that will reduce future repair needs.

Contractor Shall provide all labor, materials, equipment for below projects:

• Side entire building with Variform Camden Pointe double .044 mil in sandy tan color (or equivalent with .044 mil or greater thickness). Exact color choice to come from standard palate choices.

o Building is approximately 36’x214’ with 10’ sidewalls. The south side of the facility has 9 - 12’x10’ garage doors.

o Repair current siding as necessary to provide secure nailing base for new siding.

• Install aluminum soffit and fascia for entire building. This includes main structure, back porch area and two front entrance awning areas.

o Current soffit structure may require removal or opening to achieve airflow to attic spaces in heated portions of the building.

o Repair/replace current wood soffit/fascia as needed to provide solid nailing surfaces o White or brown, owner to select o Entrance awnings must be fully covered with metal or siding materials, to include supports and gable face.

• Provide durable, weatherproof, maintenance-free solution garage trim. This may be, but not limited to, wrapping door trim with woodgrain PVC product.

• Replace all windows with Vinyl frame, low E insulated glass, with same operation as exists (casement – casement, double hung- double hung)with screens. Simonton, Pella or other approved equal vinyl replacement window. Proposed new units are not to decrease glass size by more than 1” in any direction. Contractor is responsible for measuring each window for replacement size.

• Replace 2 south side entrance doors in office/garage area with 36” commercial grade steel door (brown in color), with half lite door. Owner to make final selection. Door hardware to be installed, door closer, kick plate on direction of travel side (stainless steel) , lever handle lockset keyed to match existing , Install PVC/Vinyl brickmould and wrap jambs with aluminum to match other trims.

• Install matching (brown) metal roofing on existing entrance awnings.

• Install Owens-Corning Cultured stone veneer CSV2084 Earth River Rock or approved equivalent around exterior water connections. Area to be protected is approximately

6’x4’ located at the north and south side of the building.

o Option 2 Install ribbed or corrugated metal panels in dark brown to match other trim.

20190522

Contractor shall provide owner representative with submittals of building materials specificed and colors (Doors, windows, siding, soffit/facia) for approval before ordering.

Daily clean up of construction materials is required. Extra care shall be taken for nail/screw cleanup around doors, walkways and driveway areas. Contractor must keep area clean in front of emergency equipment to the extent possible, to include dumpsters, vehicles etc.

Contractor is responsible for offsite disposal of all construction waste. Contractor shall not utilize onsite DNR dumpster.

Contractor shall inform department representative of day’s planned garage door blockages to ensure fire equipment is not blocked from emergency response.

All work is to be performed to meet Michigan Building Code. All applicable permits and inspections are through the State of Michigan LARA and are the responsibility of the contractor.