SCO-23-26839-01A- Add#2- DACS- NCFS Lenoir Office.pdf
PDF 5 MB Posted
- Solicitation number
- SCO-23-26839-01A
- Issued by
- Lee County, North Carolina
About this file
This document is an addendum and pre-bid meeting package for the NC Forest Service New County Office project in Lenoir County, with a State Contract Office (SCO) number of 23-26839-01A. The project involves constructing a new forest service county office located at 2208 Robinson Road in Kinston, NC. The bid documents were issued by Walker Group Architecture, with a pre-bid meeting held on October 9th, 2025, and the bid opening scheduled for October 23rd, 2025 at 3:00 pm. The total project duration is set at 365 days after notice to proceed, with liquidated damages of $500 per day for delays beyond the contract completion date. Bidders are required to submit a 5% bid bond or cashier's check, and a Performance & Payment Bond for 100% of the contract price. The project site is accessible for contractor walkthroughs, and all non-gravel areas will be seeded and mulched, with sod provided as a bid option.
The addendum provides detailed clarifications on various project specifications, including construction testing (to be performed by the owner), fence grounding requirements, electrical specifications, HVAC equipment details, and specific material selections. Key specifications include porcelain floor and wall tiles from Daltile ANCHORAGE in white, LVT flooring from Shaw Contract in Char color, and windows with a wind resistance rating of dp 50. The project requires compliance with Minority Business Enterprise (MBE) forms and guidelines, and bidders must submit a lump sum proposal. No bid alternates are permitted, and the final addenda will be issued no later than October 16th, 2025. The project is funded through the NC Department of Agriculture and Consumer Services, with the bid to be a single prime contract covering general, plumbing, mechanical, and electrical work.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SCO-23-26839-01A Addendum #1.pdf | ||
| SCO-23-26839-01A-NTB.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
https://walkergrouparch.sharepoint.com/sites/WGAServer/Shared Documents/1- Projects/2023/2318.NCFS (Forest Service County Offices)/7- Construction/1- Bidding & Negotiation/Addendum/DACS- NCFS Lenoir County Office - Addendum 02.docx
ADDENDUM NO. 02 DATE: 10/16/2025
TO: ALL BIDDERS
FROM: The Walker Group Architecture, Inc.
RE: DACS- NC Forest Service New County Office for Lenoir County
SCO# 23-26839-01A
The following corrections, clarifications, or supplemental information is to be incorporated into the Contractor(s) bid to perform the Work:
1. Will the Owner cover all testing, by independent agency, as called out at various specification sections.
Response: Construction testing will be by owner.
2. Clarify whether the EC or fence contractor is to provide fence grounding as shown on Detail A/CS502. If the EC, confirm that ground rods are only needed at each gate post and not each fence post as well. Avolis Response: Fence Contractor shall provide grounding per the Detail.
3. Clarify where the 2-4” empty conduits for telephone utility are to terminate? Response: Contractor to coordinate with the service provider.
https://walkergrouparch.sharepoint.com/sites/WGAServer/Shared Documents/1- Projects/2023/2318.NCFS (Forest Service County Offices)/7-
4. Clarify what the UGE circled in red in the below screenshot is. Does the 1000-gal concrete tank need power?
Avolis Response: Yes, this service is for the sewer pump. See Septic Permit information on Sheet CU501.
5. Does all the non-gravel area get sod or seed? Avolis Response: All non gravel areas shall be seeded and mulched per the requirements shown on Sheet CG501. Sod shall be provided as a Bid Option. See new form of proposal.
6. What is the last day for questions? Response: Last day for questions was 10/15/25.
7. Are building permits required? Does the GC pay if required? Response: Local building permits are not required for projects on state property.
8. Please provide a specification for the attic access ladder.
Response: Attic ladder basis of design is 10-foot aluminum ladder with aluminum frame, 54” x 22.5 Rough opening, 375 lb load capacity by LITE. Features shall include heavy duty hinges, slip-resistant cross-tread steps, step depthe of 3.25 inches.
9. Please provide a specification for the crawl space access door.
Response: Crawl space access door basis of design is FA300 Floor Door by Acudor Access Panels, 30” x 30”.
Access Panel to be made of aluminum frame and door with stainless steel hinges and hardware. Door construction shall be ¼” aluminum diamond plate, reinforced for live load of 300 lbs/sf. Frame shall be fabricated from aluminum extrusion with an integral 1” anchor flange. Hardware shall be stainless steel butt hinges with tamperproof stainless steel bolts and nuts. Access door shall have automatic hold open arm and vinyl grip that allows door panel to open to 90 degrees. Mill finish with standard latch of aluminum drop handle with staple for padlock.
10. The civil drawings show what appears to be a second septic drain field. Please provide more information. Avolis Response: A primary drain field is shown and shall be constructed. The location of the repair drain field is illused and shall NOT be constructed. This space is designed for future use, if needed.
https://walkergrouparch.sharepoint.com/sites/WGAServer/Shared Documents/1- Projects/2023/2318.NCFS (Forest Service County Offices)/7-
11. Working on pricing the flooring and tile on this project and was hoping you could provide insight into Basis-of-
Design items desired for LVT, Floor Tile, and Wall Tile. No direction provided in the Drawings or Specs for BOD. Should I just provide Material Allowances at this time?
Response: Floor tile and wall tile to be colorbody porcelain 12 X 24 as specified. Basis of Design is Daltile ANCHORAGE, color: White AC04. LVT Basis of Design is Shaw Contract, Style: UNVEIL, Color: Char.
Size: 9” x 36” in lieu of 6” x 36” as originally specified.
12. Did you intend to have hurricane impact operable aluminum windows?
Response: Impact resistant windows are not required. Instead, windows with a wind resistance rating of dp 50 shall be provided.
13. Will density testing be required on rock and in any fill on site? Response: Density testing will be by owner.
14. It states to sod area once completed. clearing limits is 5 acres. is it expected to sod entire site? Avolis
Response: All non gravel areas shall be seeded and mulched per the requirements shown on Sheet CG501.
Sod shall be provided as a Bid Option.
15. We had two staff members attend the Prebid meeting. There was mentioned of sending out the Prebid sign-in sheet. Will there be one sent? Response: Pre-bid sign in sheet is attached.
16. Is there an engineer’s estimate for the project? Response: a project budget will not be shared.
17. Detail 1 on sheet E-301 requires a new 120/208V transformer be installed, is it correct that this building requires
3-phase power supplied to it? Response: See attached revised drawings to show a single phase service as three phase is not available at the site.
18. The aluminum handrail for the ramp does not have any specifications on the handrail bracket or the finish.
Could you find out if the handrail is going to have a mill finish on it or if they would want it powder coated.
Response: Handrail shall be powder coated steel instead of aluminum.
19. Will the 3 interior doors with 4" x 30" vision lites have steel inserts for the glass or wood glass stops?
Response: Doors shall have wood glass stops.
20. As far as the 2 exterior door lites go I have the overall width and height on them, but I still need the unit thickness, glass type (clear, lowE, tinted), and the grid type (profile, width, and GBG or exterior), and what type of stops will secure this glass in the provided door?
Response: Doors shall have low E clear glass with grid that is between glass (GBG). Glass stops as recommended by door manufacturer.
21. EFCO double hung exterior windows with this job but need to know if screens are required or not?
Response: Screens are not required.
22. Can you please provide basis of design model numbers and manufacturer for HVAC grilles. Response: Grille make and model added to the revised sheet for the supply.
23. It is my understanding that the forestry sign not provided by the contractor; are the galvanized vertical bars to which the sign is attached to be provided and installed by the contractor? Response: Galvanized structural support for sign shall be provided by contractor.
https://walkergrouparch.sharepoint.com/sites/WGAServer/Shared Documents/1- Projects/2023/2318.NCFS (Forest Service County Offices)/7-
24. Is there a specification or approved manufacturer for the pull-down attic access ladder? Response: See #8 response.
25. Can the contractor burn debris on site? Response: Yes, Debris can be burned on site with proper notification.
26. Can gutters be K-style in order tobe continuous metal. Response: Yes, standard K-style gutter are acceptable.
END OF ADDENDUM 02
SCO-Proposal Form 2013 1 of 3
F O R M OF P R O P O S A L
NC Forest Service Contract:
County Office – Lenoir County NC Dept. of Agriculture and Consumer Services Bidder:
SCO-ID #. 23-226839-01A
Date:
The undersigned, as bidder, hereby declares that the only person or persons interested in this proposal as principal or principals is or are named herein and that no other person than herein mentioned has any interest in this proposal or in the contract to be entered into; that this proposal is made without connection with any other person, company or parties making a bid or proposal; and that it is in all respects fair and in good faith without collusion or fraud. The bidder further declares that he has examined the site of the work and the contract documents relative thereto, and has read all special provisions furnished prior to the opening of bids; that he has satisfied himself relative to the work to be performed. The bidder further declares that he and his subcontractors have fully complied with NCGS 64, Article 2 in regards to E-Verification as required by Section 2.(c) of Session Law 2013-418, codified as N.C. Gen. Stat. § 143-129(j).
The Bidder proposes and agrees if this proposal is accepted to contract with the
State of North Carolina through the Department of Agriculture and Consumer Services in the form of contract specified below, to furnish all necessary materials, equipment, machinery, tools, apparatus, means of transportation and labor necessary to complete the construction of
NC Forest Service County Office in Lenoir County, North Carolina in full in complete accordance with the plans, specifications, and contract documents, to the full and entire satisfaction of the State of North Carolina, and the
NC Forest Service with a definite understanding that no money will be allowed for extra work except as set forth in the General Conditions and the contract documents, for the sum of:
SINGLE PRIME CONTRACT:
Base Bid:
Dollars($)
General Subcontractor:
Lic
Plumbing Subcontractor:
Lic
Mechanical Subcontractor:
Lic
Electrical Subcontractor:
Lic
GS143-128(d) requires all single prime bidders to identify their subcontractors for the above subdivisions of work. A contractor whose bid is accepted shall not substitute any person as subcontractor in the place of the subcontractor listed in the original bid, except (i) if the listed subcontractor's bid is later determined by the contractor to be non-responsible or non-responsive or the listed subcontractor refuses to enter into a contract for the complete performance of the bid work, or (ii) with the approval of the awarding authority for good cause shown by the contractor.
SCO-Proposal Form 2013 2 of 3
UNIT PRICES:
Unit prices quoted and accepted shall apply throughout the life of the contract, except as otherwise specifically noted. Unit prices shall be applied, as appropriate, to compute the total value of changes in the base bid quantity of the work all in accordance with the contract documents.
GENERAL CONTRACT:
No. G-1 Excavation of unsuitable soils and backfill with structural fill (CY) Unit Price ($)
ALTERNATES:
Should any of the alternates as described in the contract documents be accepted, the amount written below shall be the amount to be "added to" or "deducted from" the base bid. (Strike out "Add" or "Deduct" as appropriate.)
GENERAL CONTRACT:
Bid Alternate 01: Provide Centipede sod per Civil Drawings. Base bid is establishing grass with seed only per notes on sheet CG501.
(Add) Dollars ($)
MINORITY BUSINESS PARTICIPATION REQUIREMENTS
Provide with the bid - Under GS 143-128.2(c) the undersigned bidder shall identify on its bid (Identification of Minority Business Participation Form) the minority businesses that it will use on the project with the total dollar value of the bids that will be performed by the minority businesses. Also list the good faith efforts (Affidavit A) made to solicit minority participation in the bid effort.
NOTE: A contractor that performs all of the work with its own workforce may submit an Affidavit (B) to that effect in lieu of Affidavit (A) required above. The MB Participation Form must still be submitted even if there is zero participation.
After the bid opening - The Owner will consider all bids and alternates and determine the lowest responsible, responsive bidder. Upon notification of being the apparent low bidder, the bidder shall then file within 72 hours of the notification of being the apparent lowest bidder, the following:
An Affidavit (C) that includes a description of the portion of work to be executed by minority businesses, expressed as a percentage of the total contract price, which is equal to or more than the 10% goal established.
This affidavit shall give rise to the presumption that the bidder has made the required good faith effort and Affidavit D is not necessary;
* OR *
If less than the 10% goal, Affidavit (D) of its good faith effort to meet the goal shall be provided. The document must include evidence of all good faith efforts that were implemented, including any advertisements, solicitations and other specific actions demonstrating recruitment and selection of minority businesses for participation in the contract.
Note: Bidders must always submit with their bid the Identification of Minority Business Participation Form listing all MB contractors, vendors and suppliers that will be used. If there is no MB participation, then enter none or zero on the form. Affidavit A or Affidavit B, as applicable, also must be submitted with the bid. Failure to file a required affidavit or documentation with the bid or after being notified apparent low bidder is grounds for rejection of the bid.
SCO-Proposal Form 2013 3 of 3
Proposal Signature Page
The undersigned further agrees that in the case of failure on his part to execute the said contract and the bonds within ten (10) consecutive calendar days after being given written notice of the award of contract, the certified check, cash or bid bond accompanying this bid shall be paid into the funds of the owner's account set aside for the project, as liquidated damages for such failure; otherwise the certified check, cash or bid bond accompanying this proposal shall be returned to the undersigned.
Respectfully submitted this day of
(Name of firm or corporation making bid)
WITNESS: By:
Signature
Name:
(Proprietorship or Partnership) Print or type
Title______________ (Owner/Partner/Pres./V.Pres)
Address
ATTEST:
By: License No.
Title: Federal I.D. No.
(Corp. Sec. or Asst. Sec. only)
Email Address:
(CORPORATE SEAL)
Addendum received and used in computing bid:
Addendum No. 1 Addendum No. 3 Addendum No. 5 Addendum No. 6
Addendum No. 2 Addendum No. 4 Addendum No. 6 Addendum No. 7
DNA B
HVAC
WH
OFFICE
OFFICE
OFFICE
CONFERENCE
ROOM
STORAGE
MECH/ELECT/
TELECOM
BREAKROOM
UNISEX
BATHROOM
CORRIDOR
SCALE:
N
1 MECHANICAL DUCT AND EQUIPMENT PLAN
1/4" = 1'-0"
New NC Forest Service County Office for Lenoir County
2208 ROBINSON ROAD
KINSTON, NC 28504
Project Number 23-26839-01 Drawn
Scale
Drawing Title
AS NOTED
Sheet Number Of
Drawing Number
Date 9/12/25 Checked
R ev is io ns
N o.
D at e
SCO# 23-26839-01A
Bid Documents
MECHANICAL
PLANS
2 4
M-101
GENERAL NOTE:
10/16/25
AutoCAD SHX Text 14"x14"
AutoCAD SHX Text 14"x14"
AutoCAD SHX Text
SA
AutoCAD SHX Text
AutoCAD SHX Text
SA
AutoCAD SHX Text
AutoCAD SHX Text
SA
AutoCAD SHX Text
AutoCAD SHX Text
SA
AutoCAD SHX Text
AutoCAD SHX Text
SA
AutoCAD SHX Text
AutoCAD SHX Text
SA
AutoCAD SHX Text
AutoCAD SHX Text
SA
AutoCAD SHX Text
AutoCAD SHX Text
RP1
AutoCAD SHX Text
AutoCAD SHX Text
RP2
AutoCAD SHX Text
AutoCAD SHX Text
RP2
AutoCAD SHX Text
AutoCAD SHX Text
RP1
AutoCAD SHX Text
AutoCAD SHX Text
RP1
AutoCAD SHX Text
AutoCAD SHX Text
RP1
AutoCAD SHX Text
AutoCAD SHX Text
SA
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
HP
AutoCAD SHX Text
HOUSEKEEPING PAD
AutoCAD SHX Text
AutoCAD SHX Text
EF
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SOFFIT VENT
AutoCAD SHX Text
8" UP TO ROOFJACK, RJ-1
AutoCAD SHX Text T
AutoCAD SHX Text
(919) 778-9064
AutoCAD SHX Text
GOLDSBORO, NC 27532
AutoCAD SHX Text
P.O. BOX 11527
AutoCAD SHX Text
TEL:
AutoCAD SHX Text
D. HAM
AutoCAD SHX Text 224007
AutoCAD SHX Text
PROJECT MGR.
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
NC LIC #: C-1132
AutoCAD SHX Text
D. HILL
AutoCAD SHX Text M
AutoCAD SHX Text
SEAL
AutoCAD SHX Text A
AutoCAD SHX Text 31466
AutoCAD SHX Text I
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text C
AutoCAD SHX Text H
AutoCAD SHX Text N
AutoCAD SHX Text O
AutoCAD SHX Text A
AutoCAD SHX Text J
AutoCAD SHX Text P
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text E
AutoCAD SHX Text I
AutoCAD SHX Text N
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text L
AutoCAD SHX Text M
AutoCAD SHX Text A
AutoCAD SHX Text O
AutoCAD SHX Text N
AutoCAD SHX Text A
AutoCAD SHX Text L
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text D.
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text G
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text H
AutoCAD SHX Text
1. IT IS RECOMMENDED THE HVAC SYSTEM BE OPERATED ABOVE 68 DEGREES DURING COOLING TO MINIMIZE HUMIDITY WITHIN THE SPACE. THE THERMOSTAT SETTING FOR FAN OPERATION SHALL BE SET TO "AUTO".
AutoCAD SHX Text 10/16/25
AutoCAD SHX Text
AutoCAD SHX Text
ADDENDUM 02
MECHANICAL DUCT INSULATION TABLE
EXHAUST FAN SCHEDULE
MECHANICAL PIPING INSULATION TABLE
New NC Forest Service County Office for Lenoir County
2208 ROBINSON ROAD
KINSTON, NC 28504
Project Number 23-26839-01 Drawn
Scale
Drawing Title
AS NOTED
Sheet Number Of
Drawing Number
Date 9/12/25 Checked
R ev is io ns
N o.
D at e
SCO# 23-26839-01A
Bid Documents
HEAT PUMP (OUTDOOR UNIT) SCHEDULE
HEAT PUMP (INDOOR UNIT) SCHEDULE
MECHANICAL
SCHEDULES
4 4
M-301
AIR DISTRIBUTION SCHEDULE
ROOF CAP SCHEDULE
10/16/25
AutoCAD SHX Text
SERVICE
AutoCAD SHX Text
LOCATION
AutoCAD SHX Text
MATERIAL TYPE
AutoCAD SHX Text
JACKET TYPE
AutoCAD SHX Text
R-VALUE
AutoCAD SHX Text
THICKNESS
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
RIGID METAL SUPPLY DUCT
AutoCAD SHX Text
BUILDING ENVELOPE
AutoCAD SHX Text
FIBERGLASS BLANKET
AutoCAD SHX Text
FSK
AutoCAD SHX Text R-6.0
AutoCAD SHX Text 2.2"
AutoCAD SHX Text
R-VALUE BASED ON NOMINAL RATING AS INSTALLED
AutoCAD SHX Text
VENTILATED ATTIC OR CRAWLSPACE
AutoCAD SHX Text
FIBERGLASS BLANKET
AutoCAD SHX Text
FSK
AutoCAD SHX Text R-8.0
AutoCAD SHX Text 3"
AutoCAD SHX Text
R-VALUE BASED ON NOMINAL RATING AS INSTALLED
AutoCAD SHX Text
EXPOSED
AutoCAD SHX Text
FIBERGLASS DUCT LINER
AutoCAD SHX Text
AutoCAD SHX Text R-4.0
AutoCAD SHX Text 1"
AutoCAD SHX Text
SUPPLY DUCTS INDICATED AS LINED
AutoCAD SHX Text
RIGID METAL RETURN DUCT
AutoCAD SHX Text
CONDITIONED SPACE
AutoCAD SHX Text
(NONE REQUIRED)
AutoCAD SHX Text
BUILDING ENVELOPE
AutoCAD SHX Text
FIBERGLASS BLANKET
AutoCAD SHX Text
FSK
AutoCAD SHX Text R-6.0
AutoCAD SHX Text 2.2"
AutoCAD SHX Text
R-VALUE BASED ON NOMINAL RATING AS INSTALLED
AutoCAD SHX Text
VENTILATED ATTIC OR CRAWLSPACE
AutoCAD SHX Text
FIBERGLASS BLANKET
AutoCAD SHX Text
FSK
AutoCAD SHX Text R-8.0
AutoCAD SHX Text 3"
AutoCAD SHX Text
R-VALUE BASED ON NOMINAL RATING AS INSTALLED
AutoCAD SHX Text
EXHAUST DUCT
AutoCAD SHX Text
ALL
AutoCAD SHX Text
(NONE REQUIRED)
AutoCAD SHX Text
FLEXIBLE SUPPLY DUCT
AutoCAD SHX Text
BUILDING ENVELOPE
AutoCAD SHX Text
FIBERGLASS
AutoCAD SHX Text
REINFORCED METALIZED PROTECTIVE BARRIER
AutoCAD SHX Text R-6.0
AutoCAD SHX Text 2"
AutoCAD SHX Text
VENTILATED ATTIC OR CRAWLSPACE
AutoCAD SHX Text
FIBERGLASS
AutoCAD SHX Text
REINFORCED METALIZED PROTECTIVE BARRIER
AutoCAD SHX Text R-8.0
AutoCAD SHX Text 2 1/2"
AutoCAD SHX Text
FLEXIBLE RETURN DUCT
AutoCAD SHX Text
BUILDING ENVELOPE
AutoCAD SHX Text
FIBERGLASS
AutoCAD SHX Text
REINFORCED METALIZED PROTECTIVE BARRIER
AutoCAD SHX Text R-6.0
AutoCAD SHX Text 2"
AutoCAD SHX Text
VENTILATED ATTIC OR CRAWLSPACE
AutoCAD SHX Text
FIBERGLASS
AutoCAD SHX Text
REINFORCED METALIZED PROTECTIVE BARRIER
AutoCAD SHX Text R-8.0
AutoCAD SHX Text 2 1/2"
AutoCAD SHX Text NOTES: : 1. PROVIDE WITH ROOF CAP AS SHOWN ON PLANS. 2. PROVIDE WITH BACKDRAFT DAMPER. * SONE LEVELS SHALL NOT EXCEED LEVELS LISTED IN SCHEDULE. ESP - STATIC PRESSURE EXTERNAL TO THE FAN ASSEMBLY TSP - TOTAL STATIC PRESSURE INCLUDING FAN ACCESSORIES
AutoCAD SHX Text
CONTROL TYPE DESCRIPTION: : A. INTERLOCK WITH ROOM LIGHTING CONTROL BY EC.
AutoCAD SHX Text
TYPE
AutoCAD SHX Text
CEILING
AutoCAD SHX Text
EF-1
AutoCAD SHX Text
MARK
AutoCAD SHX Text 120/1%%C
AutoCAD SHX Text
WATTS
AutoCAD SHX Text
CFM
AutoCAD SHX Text
AutoCAD SHX Text
ESP
AutoCAD SHX Text 0.25"
AutoCAD SHX Text
VOLT/PH
AutoCAD SHX Text
AutoCAD SHX Text
12 LBS
AutoCAD SHX Text
WEIGHT
AutoCAD SHX Text
GREENHECK
AutoCAD SHX Text
REF. MODEL
AutoCAD SHX Text
SP-A90
AutoCAD SHX Text
REF. MANF.
AutoCAD SHX Text
*SONES
AutoCAD SHX Text 0.4
AutoCAD SHX Text
NOTES
AutoCAD SHX Text 1,2
AutoCAD SHX Text
CONTROL
AutoCAD SHX Text A
AutoCAD SHX Text
SERVICE
AutoCAD SHX Text NOTES: ALL PIPE HANGERS AND SUPPORTS ON COLD PIPING SHALL BE OF CLEVIS TYPE ON OUTSIDE OF INSULATION TO MAINTAIN VAPOR BARRIER. : ALL PIPE HANGERS AND SUPPORTS ON COLD PIPING SHALL BE OF CLEVIS TYPE ON OUTSIDE OF INSULATION TO MAINTAIN VAPOR BARRIER. ALL PIPE HANGERS AND SUPPORTS ON COLD PIPING SHALL BE OF CLEVIS TYPE ON OUTSIDE OF INSULATION TO MAINTAIN VAPOR BARRIER.
AutoCAD SHX Text
LOCATION
AutoCAD SHX Text
MATERIAL TYPE
AutoCAD SHX Text
JACKET TYPE
AutoCAD SHX Text
PIPE SIZE
AutoCAD SHX Text
THICKNESS
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
REFRIGERATION SUCTION PIPING
AutoCAD SHX Text
BUILDING ENVELOPE
AutoCAD SHX Text
CLOSED CELL ELASTOMERIC
AutoCAD SHX Text
ALL
AutoCAD SHX Text 3/4"
AutoCAD SHX Text
NONE
AutoCAD SHX Text
SEAL ALL JOINTS & SEAMS TO PREVENT CONDENSATION
AutoCAD SHX Text
UNCONDITIONED SPACE
AutoCAD SHX Text
CLOSED CELL ELASTOMERIC
AutoCAD SHX Text
ALL
AutoCAD SHX Text 1 1/2"
AutoCAD SHX Text
NONE
AutoCAD SHX Text
SEAL ALL JOINTS & SEAMS TO PREVENT CONDENSATION
AutoCAD SHX Text
EXTERIOR
AutoCAD SHX Text
CLOSED CELL ELASTOMERIC
AutoCAD SHX Text
ALL
AutoCAD SHX Text 1 1/2"
AutoCAD SHX Text
NONE
AutoCAD SHX Text
PROVIDE WITH WHITE UV PROTECTIVE COATING
AutoCAD SHX Text
A/C CONDENSATE PIPING
AutoCAD SHX Text
BUILDING ENVELOPE
AutoCAD SHX Text
CLOSED CELL ELASTOMERIC
AutoCAD SHX Text
ALL
AutoCAD SHX Text 3/4"
AutoCAD SHX Text
NONE
AutoCAD SHX Text
AutoCAD SHX Text
VENTILATED ATTIC OR CRAWLSPACE
AutoCAD SHX Text
CLOSED CELL ELASTOMERIC
AutoCAD SHX Text
ALL
AutoCAD SHX Text 3/4"
AutoCAD SHX Text
NONE
AutoCAD SHX Text
(NONE REQUIRED FOR EXTERIOR)
AutoCAD SHX Text
(919) 778-9064
AutoCAD SHX Text
GOLDSBORO, NC 27532
AutoCAD SHX Text
P.O. BOX 11527
AutoCAD SHX Text
TEL:
AutoCAD SHX Text
D. HAM
AutoCAD SHX Text 224007
AutoCAD SHX Text
PROJECT MGR.
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
NC LIC #: C-1132
AutoCAD SHX Text
D. HILL
AutoCAD SHX Text M
AutoCAD SHX Text
SEAL
AutoCAD SHX Text A
AutoCAD SHX Text 31466
AutoCAD SHX Text I
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text C
AutoCAD SHX Text H
AutoCAD SHX Text N
AutoCAD SHX Text O
AutoCAD SHX Text A
AutoCAD SHX Text J
AutoCAD SHX Text P
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text E
AutoCAD SHX Text I
AutoCAD SHX Text N
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text L
AutoCAD SHX Text M
AutoCAD SHX Text A
AutoCAD SHX Text O
AutoCAD SHX Text N
AutoCAD SHX Text A
AutoCAD SHX Text L
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text D.
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text G
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text H
AutoCAD SHX Text
MCA
AutoCAD SHX Text
MARK
AutoCAD SHX Text
HP-1
AutoCAD SHX Text
EAT(DB)
AutoCAD SHX Text
NOM CAP
AutoCAD SHX Text
VOLT/PH
AutoCAD SHX Text
FLA
AutoCAD SHX Text
REF. MODEL
AutoCAD SHX Text
MIN. SEER
AutoCAD SHX Text
MOCP
AutoCAD SHX Text
REF. MANF.
AutoCAD SHX Text
HSPF
AutoCAD SHX Text
WEIGHT
AutoCAD SHX Text 76%%D/65%%D
AutoCAD SHX Text
EAT(DB/WB)
AutoCAD SHX Text
NOMINAL COOLING CAPACITY
AutoCAD SHX Text
MARK
AutoCAD SHX Text
AH-1
AutoCAD SHX Text
SUPPLY FAN
AutoCAD SHX Text
EXT SP
AutoCAD SHX Text
OA CFM
AutoCAD SHX Text
AutoCAD SHX Text
SA CFM
AutoCAD SHX Text
AutoCAD SHX Text
MTR HP
AutoCAD SHX Text
SEN CAP
AutoCAD SHX Text
TOT CAP
AutoCAD SHX Text
AUX. HEAT
AutoCAD SHX Text @ 208V
AutoCAD SHX Text
MCA
AutoCAD SHX Text
VOLT/PH
AutoCAD SHX Text
FLA
AutoCAD SHX Text
REF. MANF.
AutoCAD SHX Text
MOCP
AutoCAD SHX Text
REF. MODEL
AutoCAD SHX Text
WEIGHT
AutoCAD SHX Text 1/2
AutoCAD SHX Text
GAM5A0B36
AutoCAD SHX Text
5.8 KW
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 30A
AutoCAD SHX Text
144 LBS.
AutoCAD SHX Text
3.0 TONS
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 30A
AutoCAD SHX Text
15.0 SEER
AutoCAD SHX Text 8.5
AutoCAD SHX Text
4TWR5036
AutoCAD SHX Text
230 LBS.
AutoCAD SHX Text 0.5"
AutoCAD SHX Text 208/1%%C
AutoCAD SHX Text
TRANE
AutoCAD SHX Text 95%%D
AutoCAD SHX Text 208/1%%C
AutoCAD SHX Text
TRANE
AutoCAD SHX Text NOTES: : 1. PROVIDE THE FOLLOWING OPTIONS AND ACCESSORIES: - SINGLE POINT WIRING CONNECTION - TXV MATCHING CONDENSER CAPACITY - 7-DAY PROGRAMMABLE THERMOSTAT WITH LOCKOUT FUNCTION - ECM FAN MOTORS
AutoCAD SHX Text NOTES: : 1. PROVIDE THE FOLLOWING OPTIONS AND ACCESSORIES: - 5 YEAR COMPRESSOR WARRANTY - COMPRESSOR ANTI SHORT CYCLE DELAY - CRANKCASE HEATERS - HIGH AND LOW PRESSURE SWITCHES - OUTDOOR THERMOSTAT - LOW AMBIENT CONTROL TO 55°- LOW AMBIENT CONTROL TO 30° OPTION- SPECIALTIES FOR LONG-LINE APPLICATION - EXTREME CONDITION MOUNT KIT 2. M.C. SHALL COORDINATE PRODUCT SPECIFIC ELECTRICAL REQUIREMENTS WITH E.C..
AutoCAD SHX Text
35.4 MBH
AutoCAD SHX Text
27.8 MBH
AutoCAD SHX Text
MARK
AutoCAD SHX Text
SA
AutoCAD SHX Text
TYPE
AutoCAD SHX Text
CEILING REGISTER WITH ADJUSTABLE MULTI-SHUTTER DAMPER
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
FINISH
AutoCAD SHX Text
MAT'L
AutoCAD SHX Text
3-WAY
AutoCAD SHX Text
PATTERN
AutoCAD SHX Text
AutoCAD SHX Text
NECK
AutoCAD SHX Text
ALUM.
AutoCAD SHX Text
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text 12"x8"
AutoCAD SHX Text
SURF
AutoCAD SHX Text
MNT.
AutoCAD SHX Text
SIZE
AutoCAD SHX Text 12"x12"x10"%%C
AutoCAD SHX Text
RP1
AutoCAD SHX Text 9"x9"x8"%%C
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
ALUM.
AutoCAD SHX Text
RETURN PERFORATED FACE
AutoCAD SHX Text
RETURN PERFORATED FACE
AutoCAD SHX Text
RP2
AutoCAD SHX Text
AutoCAD SHX Text
ALUM.
AutoCAD SHX Text
BLACK BACK PAN
AutoCAD SHX Text 12"X12"
AutoCAD SHX Text 15"x15"
AutoCAD SHX Text
SURF
AutoCAD SHX Text
BLACK BACK PAN
AutoCAD SHX Text
SURF
AutoCAD SHX Text
NOTES
AutoCAD SHX Text
SP DROP
AutoCAD SHX Text 0.06"
AutoCAD SHX Text
INTAKE
AutoCAD SHX Text
RJ-1
AutoCAD SHX Text
MARK
AutoCAD SHX Text
USAGE
AutoCAD SHX Text 0-220
AutoCAD SHX Text
CFM RANGE
AutoCAD SHX Text
GREENHECK
AutoCAD SHX Text
REF. MANF.
AutoCAD SHX Text
STEEL
AutoCAD SHX Text
MATERIAL
AutoCAD SHX Text
RJ-6X9
AutoCAD SHX Text
REF. MODEL
AutoCAD SHX Text
AutoCAD SHX Text
NOTES: : 1. PROVIDE WITH BIRDSCREEN & FLASHING FLANGE.
AutoCAD SHX Text
SIZE
AutoCAD SHX Text 6"x9"
AutoCAD SHX Text H&C
AutoCAD SHX Text
MANF.
AutoCAD SHX Text
AutoCAD SHX Text
MODEL
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 10/16/25
AutoCAD SHX Text
ADDENDUM 02
ELECTRICAL LEGEND
LIGHT FIXTURE SCHEDULE
New NC Forest Service County Office for Lenoir County
2208 ROBINSON ROAD
KINSTON, NC 28504
Project Number 23-26839-01 Drawn
Scale
Drawing Title
AS NOTED
Sheet Number Of
Drawing Number
Date 9/12/25 Checked
R ev is io ns
N o.
D at e
SCO# 23-26839-01A
Bid Documents
ELECTRICAL
NOTES
1 5
E-001
ELECTRICAL NOTES
ELECTRICAL SYSTEMS AND EQUIPMENT:
ELECTRICAL ENERGY SUMMARY
10/16/25
AutoCAD SHX Text
MOUNTING HEIGHT OF A DEVICE MAY VARY AS NOTED ON PLANS.
AutoCAD SHX Text
1. STANDARD MOUNTING HEIGHTS OF DEVICES SHALL BE AS LISTED IN LEGEND. SPECIFIC
AutoCAD SHX Text
2. E.C. SHALL COORDINATE COLOR SELECTION OF DEVICES AND COVERPLATES WITH ARCHITECT, AutoCAD SHX Text
UNO
AutoCAD SHX Text
BOD
AutoCAD SHX Text L
AutoCAD SHX Text C
AutoCAD SHX Text
ABBREVIATIONS:
AutoCAD SHX Text G.C.
AutoCAD SHX Text E.C.
AutoCAD SHX Text M.C.
AutoCAD SHX Text P.C.
AutoCAD SHX Text
AFF
AutoCAD SHX Text
OWNER AND/OR G.C.
AutoCAD SHX Text
%%UNOTES:%%U
AutoCAD SHX Text
DATA/PHONE OUTLET
AutoCAD SHX Text
UNLESS NOTED OTHERWISE
AutoCAD SHX Text
BOTTOM OF DEVICE
AutoCAD SHX Text
CENTERLINE OF DEVICE
AutoCAD SHX Text
GENERAL CONTRACTOR
AutoCAD SHX Text
ELECTRICAL CONTRACTOR
AutoCAD SHX Text
MECHANICAL CONTRACTOR
AutoCAD SHX Text
PLUMBING CONTRACTOR
AutoCAD SHX Text
ABOVE FINISHED FLOOR
AutoCAD SHX Text
AutoCAD SHX Text
DOUBLE GANG UNO
AutoCAD SHX Text
THERMOSTAT OR SENSOR JUNCTION BOX
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
NON-FUSED DISCONNECT
AutoCAD SHX Text
MANUAL MOTOR SWITCH
AutoCAD SHX Text
GROUND FAULT RECEPTACLE
AutoCAD SHX Text
GROUND FAULT, WEATHER RESIST RECEPT.
AutoCAD SHX Text
WR
AutoCAD SHX Text
GFI
AutoCAD SHX Text
GFI
AutoCAD SHX Text
RECEPTACLE
AutoCAD SHX Text M
AutoCAD SHX Text S
AutoCAD SHX Text
SWITCH
AutoCAD SHX Text
FUSED DISCONNECT
AutoCAD SHX Text S
AutoCAD SHX Text
JUNCTION BOX
AutoCAD SHX Text
SYM.
AutoCAD SHX Text T
AutoCAD SHX Text J
AutoCAD SHX Text
W/'IN USE" COVER
AutoCAD SHX Text HUBBELL GFRST20x
AutoCAD SHX Text HUBBELL GFTWRST20x
AutoCAD SHX Text HUBBELL HBL5352x
AutoCAD SHX Text
SIEMENS MMS
AutoCAD SHX Text
SELF TESTING PER UL 943
AutoCAD SHX Text HUBBELL CSB120x
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
REF. MODEL NO.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
MOUNT 48" TOD AFF UNO
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DOUBLE GANG UNO
AutoCAD SHX Text
MOUNT AS REQUIRED
AutoCAD SHX Text HBL5362C2x FOR
AutoCAD SHX Text
AFG
AutoCAD SHX Text
ABOVE FINISHED GRADE
AutoCAD SHX Text
TOD
AutoCAD SHX Text
TOP OF DEVICE
AutoCAD SHX Text
3. PROVIDE EQUIPMENT SHOWN BY HUBBELL, PASS & SEYMOUR, COOPER WIRING DEVICES, OR
AutoCAD SHX Text
EQUAL PRODUCT.
AutoCAD SHX Text
EMERGENCY LIGHT
AutoCAD SHX Text
AutoCAD SHX Text
SOLID FILL HATCHING
AutoCAD SHX Text
WEATHER RESISTANT
AutoCAD SHX Text HUBBELL HBL5362xWR
AutoCAD SHX Text
AutoCAD SHX Text
WR
AutoCAD SHX Text S
AutoCAD SHX Text
DIMMING WALL SWITCH WITH OCC SENSOR
AutoCAD SHX Text
D,OS
AutoCAD SHX Text S
AutoCAD SHX Text
WATTSTOPPER
AutoCAD SHX Text
DW-311
AutoCAD SHX Text
MULTI-WAY CONTROL UP TO
AutoCAD SHX Text
SELF TESTING PER UL 943
AutoCAD SHX Text
DUAL TECHNOLOGY (LINE VOLTAGE - 800W)
AutoCAD SHX Text
CONTRACTOR SHALL VERIFY
AutoCAD SHX Text
OS
AutoCAD SHX Text
WATTSTOPPER
AutoCAD SHX Text
DT-355
AutoCAD SHX Text
COVERAGE OF SENSORS
AutoCAD SHX Text
CEILING OCCUPANCY SENSOR
AutoCAD SHX Text
4. PROVIDE LOW VOLTAGE OCCUPANCY SENSORS WITH POWER PACKS AS REQUIRED.
AutoCAD SHX Text
FOUR SWITCH LOCATIONS
AutoCAD SHX Text
(0-10VDC DIMMING & DUAL TECH)
AutoCAD SHX Text
WALL SWITCH WITH OCCUPANCY SENSOR
AutoCAD SHX Text
OS
AutoCAD SHX Text S
AutoCAD SHX Text
WATTSTOPPER
AutoCAD SHX Text
PW-103, OR EQUAL
AutoCAD SHX Text
(PASSIVE INFRARED)
AutoCAD SHX Text
MULTI-WAY CONTROL UP TO
AutoCAD SHX Text
FOUR SWITCH LOCATIONS
AutoCAD SHX Text
CONTROLLED RECEPTACLE
AutoCAD SHX Text
0-10V DIMMER SWITCH
AutoCAD SHX Text S
AutoCAD SHX Text
HUBBELL PSD710-UNV
AutoCAD SHX Text
STAND ALONE CONTROL
AutoCAD SHX Text D
AutoCAD SHX Text
REF MANF
AutoCAD SHX Text
MARK
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
QUALITY AND APPEARANCE
AutoCAD SHX Text
INPUT WATTS
AutoCAD SHX Text
FIXTURE
AutoCAD SHX Text
VOLTS
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DIMMING TO 10%%%
AutoCAD SHX Text
MULTI-VOLT INPUT
AutoCAD SHX Text
BATTERY BACK-UP - 1400 LUMENS
AutoCAD SHX Text
STANDARD COLOR SELECTED BY ARCH.
AutoCAD SHX Text
CUSTOM COLOR SELECTED BY ARCH.
AutoCAD SHX Text
DAMP LOCATION LISTED
AutoCAD SHX Text
WET LOCATION LISTED
AutoCAD SHX Text
LED
AutoCAD SHX Text
SOURCE
AutoCAD SHX Text
LUMENS
AutoCAD SHX Text
CRI
AutoCAD SHX Text
COLOR
AutoCAD SHX Text
TEMP
AutoCAD SHX Text
BATTERY BACK-UP
AutoCAD SHX Text
ELECTRONIC BALLAST
AutoCAD SHX Text A
AutoCAD SHX Text A1
AutoCAD SHX Text
MODEL NUMBER FOR FIXTURE REFERENCE
AutoCAD SHX Text
LED
AutoCAD SHX Text
AutoCAD SHX Text 40K
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LITHONIA
AutoCAD SHX Text
CPX 2X4 AL08 80CRI SWW7 SWL MVOLT 2X4SMKSH
AutoCAD SHX Text
LED
AutoCAD SHX Text
AutoCAD SHX Text 40K
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 2x4 LED FLAT PANEL
AutoCAD SHX Text
LITHONIA
AutoCAD SHX Text
(SURFACE KIT) (EMERGENCY)
AutoCAD SHX Text
EXIT LIGHT
AutoCAD SHX Text
LQM LED R
AutoCAD SHX Text
LITHONIA
AutoCAD SHX Text
LED
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CPX 2X4 AL08 80CRI SWW7 SWL MVOLT E10WLCP 2X4SMKSH
AutoCAD SHX Text B
AutoCAD SHX Text
LED
AutoCAD SHX Text
AutoCAD SHX Text 40K
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LITHONIA
AutoCAD SHX Text
CPX 2X4 AL08 80CRI SWW7 SWL MVOLT 2X4SMKSH
AutoCAD SHX Text
1. NO EQUALS WILL BE ACCEPTED FOR TYPE A AND A1 FIXTURES. SELECTED FIXTURE MATCHES OTHERS ON THIRD FLOOR. NO EQUALS WILL BE ACCEPTED FOR TYPE A AND A1 FIXTURES. SELECTED FIXTURE MATCHES OTHERS ON THIRD FLOOR. 2. EQUAL FIXTURES BY HUBBELL, MARK, KENALL, OR COLUMBIA ARE ACCEPTED, BUT NOT LIMITED TO.EQUAL FIXTURES BY HUBBELL, MARK, KENALL, OR COLUMBIA ARE ACCEPTED, BUT NOT LIMITED TO.
AutoCAD SHX Text
EXIT
AutoCAD SHX Text C
AutoCAD SHX Text
LED
AutoCAD SHX Text
AutoCAD SHX Text 40K
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LITHONIA
AutoCAD SHX Text
CPX 1X4 AL07 80CRI SWW7 SWL MVOLT 1X4SMKSH
AutoCAD SHX Text C1
AutoCAD SHX Text
LED
AutoCAD SHX Text
AutoCAD SHX Text 40K
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LITHONIA
AutoCAD SHX Text
CPX 1X4 AL07 80CRI SWW7 SWL MVOLT E10WLCP 1X4SMKSH
AutoCAD SHX Text 2x4 LED FLAT PANEL
AutoCAD SHX Text
(SURFACE KIT)
AutoCAD SHX Text 2x4 LED FLAT PANEL
AutoCAD SHX Text
(SURFACE KIT)
AutoCAD SHX Text 1x4 LED FLAT PANEL
AutoCAD SHX Text
(SURFACE KIT) (EMERGENCY)
AutoCAD SHX Text 1x4 LED FLAT PANEL
AutoCAD SHX Text
(SURFACE KIT)
AutoCAD SHX Text
EXTERIOR LIGHTS
AutoCAD SHX Text
XA
AutoCAD SHX Text
LED
AutoCAD SHX Text
AutoCAD SHX Text 40K
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LITHONIA
AutoCAD SHX Text
WDGE2 LED P2 40K 80CRI TFTM MVOLT
AutoCAD SHX Text
XA1
AutoCAD SHX Text
LED
AutoCAD SHX Text
AutoCAD SHX Text 40K
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LITHONIA
AutoCAD SHX Text
WDGE2 LED P2 40K 80CRI TFTM MVOLT E10WH
AutoCAD SHX Text
EXTERIOR WALL PACK
AutoCAD SHX Text
EXTERIOR WALL PACK
AutoCAD SHX Text
(EMERGENCY)
AutoCAD SHX Text F
AutoCAD SHX Text
LED
AutoCAD SHX Text
AutoCAD SHX Text 30K
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
LITHONIA
AutoCAD SHX Text
DECORATIVE VANITY LED
AutoCAD SHX Text
FMVTSL 24IN MVOLT 30K 90CRI BN
AutoCAD SHX Text
(919) 778-9064
AutoCAD SHX Text
GOLDSBORO, NC 27532
AutoCAD SHX Text
P.O. BOX 11527
AutoCAD SHX Text
TEL:
AutoCAD SHX Text
D. HAM
AutoCAD SHX Text 224007
AutoCAD SHX Text
PROJECT MGR.
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
PROJECT NO.
AutoCAD SHX Text
NC LIC #: C-1132
AutoCAD SHX Text
D. HILL
AutoCAD SHX Text M
AutoCAD SHX Text
SEAL
AutoCAD SHX Text A
AutoCAD SHX Text 31466
AutoCAD SHX Text I
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text C
AutoCAD SHX Text H
AutoCAD SHX Text N
AutoCAD SHX Text O
AutoCAD SHX Text A
AutoCAD SHX Text J
AutoCAD SHX Text P
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text E
AutoCAD SHX Text I
AutoCAD SHX Text N
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text L
AutoCAD SHX Text M
AutoCAD SHX Text A
AutoCAD SHX Text O
AutoCAD SHX Text N
AutoCAD SHX Text A
AutoCAD SHX Text L
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text D.
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text G
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text H
AutoCAD SHX Text : 1. ELECTRICAL PLANS ARE INTENDED TO PROVIDE INFORMATION FOR INSTALLATION OF A COMPLETE ELECTRICAL SYSTEM. PROVIDE ALL ELECTRICAL PLANS ARE INTENDED TO PROVIDE INFORMATION FOR INSTALLATION OF A COMPLETE ELECTRICAL SYSTEM. PROVIDE ALL ESSENTIAL LABOR, MATERIALS & DEVICES REQUIRED TO PRODUCE A QUALITY END PRODUCT. THIS INCLUDES ALL REQUIRED CONTROL WIRING OR WIRING CALLED FOR BY THE MANUFACTURER. INSTALLATION SHALL FOLLOW ALL MANUFACTURER'S RECOMMENDATIONS. 2. CONTRACTOR SHALL REVIEW & BECOME FAMILIAR WITH THE WORK OF ALL TRADES FOR PURPOSES OF COORDINATION AND ROUTING. CONTRACTOR SHALL REVIEW & BECOME FAMILIAR WITH THE WORK OF ALL TRADES FOR PURPOSES OF COORDINATION AND ROUTING. CONTRACTOR SHALL PROVIDE REQUIRED PLANNING, COORDINATION AND SEQUENCING OF ELECTRICAL INSTALLATION WITH BUILDING COMPONENTS AND OTHER TRADES. 3. ALL WORK SHALL COMPLY WITH THE 2020 VERSION OF THE NATIONAL ELECTRICAL CODE (NEC). WORKMANSHIP SHALL MEET OR EXCEED ALL WORK SHALL COMPLY WITH THE 2020 VERSION OF THE NATIONAL ELECTRICAL CODE (NEC). WORKMANSHIP SHALL MEET OR EXCEED INDUSTRY STANDARDS. 4. BEFORE SUBMITTING SHOP DRAWINGS TO ENGINEER FOR REVIEW, CONTRACTOR SHALL REVIEW AND COORDINATE SUBMITTALS (SHOP BEFORE SUBMITTING SHOP DRAWINGS TO ENGINEER FOR REVIEW, CONTRACTOR SHALL REVIEW AND COORDINATE SUBMITTALS (SHOP DRAWINGS) WITH OTHER SUBMITTALS AND WITH THE REQUIREMENTS OF THE CONTRACT DOCUMENTS. BY APPROVAL AND SUBMITTAL OF SHOP DRAWINGS, PRODUCT DATA, SAMPLES AND SIMILAR SUBMITTALS TO THE ENGINEER, THE CONTRACTOR REPRESENTS THAT IT HAS DETERMINED AND VERIFIED AND CHECKED THE INFORMATION WITHIN THE SUBMITTAL WITH THE REQUIREMENTS OF THE WORK AND THE CONTRACT DOCUMENTS. CONTRACTOR IS RESPONSIBLE FOR AND SHALL DETERMINE AND VERIFY ALL FIELD MEASUREMENTS, QUANTITIES, DIMENSIONS, AND INSTALLATION REQUIREMENTS. PROVIDE WRITTEN NOTICE ON SUBMITTAL OF ANY DEVIATIONS. THE CONTRACTOR SHALL NOT BE RELIEVED OF RESPONSIBILITY FOR DEVIATIONS FROM CONTRACT DOCUMENTS REQUIREMENTS BY THE ARCHITECT'S APPROVAL OF SHOP DRAWINGS OR OTHER SUBMITTALS UNLESS THE CONTRACTOR HAS SPECIFICALLY INFORMED THE ENGINEER IN WRITING OF SUCH DEVIATION AT THE TIME OF THE SUBMITTAL AND SUCH DEVIATION HAS BEEN APPROVED IN WRITING. 5. THE ELECTRICAL CONTRACTOR SHALL NOTIFY THE STATE ELECTRICAL INSPECTORS IN THE STATE CONSTRUCTION OFFICE TO SCHEDULE THE ELECTRICAL CONTRACTOR SHALL NOTIFY THE STATE ELECTRICAL INSPECTORS IN THE STATE CONSTRUCTION OFFICE TO SCHEDULE REQUIRED INSPECTIONS BETWEEN MONDAY TO FRIDAY (NO WEEKEND INSPECTIONS WILL BE PERFORMED). NO WORK WILL BE COVERED UP UNTIL AFTER INSPECTION HAS BEEN COMPLETED AND APPROVED BY AUTHORIZED SCO INSPECTOR. 6. THE CITED EXAMPLES OF PRODUCTS ARE USED ONLY TO DENOTE THE QUALITY STANDARD OF PRODUCT DESIRED AND THEY DO NOT THE CITED EXAMPLES OF PRODUCTS ARE USED ONLY TO DENOTE THE QUALITY STANDARD OF PRODUCT DESIRED AND THEY DO NOT RESTRICT BIDDERS TO A SPECIFIC BRAND, MAKE, MANUFACTURER OR SPECIFIC NAME; THAT THEY ARE USED ONLY TO SET FORTH AND CONVEY TO BIDDERS THE GENERAL STYLE, TYPE, CHARACTER AND QUALITY OF PRODUCT DESIRED; AND THAT EQUIVALENT PRODUCTS WILL BE ACCEPTABLE. 7. PROTECT ALL NEW MATERIALS FROM THE WEATHER IN STORAGE TRAILERS OR PROVIDE SUITABLE COVERING. PROTECT ALL NEW MATERIALS FROM THE WEATHER IN STORAGE TRAILERS OR PROVIDE SUITABLE COVERING. 8. ELECTRICAL CONTRACTOR SHALL PROVIDE ALL LINE SIDE WIRING AND TERMINATIONS TO JUNCTION BOX, VFD, STARTER, DISCONNECT OR ELECTRICAL CONTRACTOR SHALL PROVIDE ALL LINE SIDE WIRING AND TERMINATIONS TO JUNCTION BOX, VFD, STARTER, DISCONNECT OR TROUGH FOR EQUIPMENT PROVIDED UNDER OTHER TRADES. LOAD SIDE WIRING AND TERMINATIONS BY OTHERS UNLESS EQUIPMENT BEING FED PROVIDED BY E.C. POWER WIRING TO CONTROL DEVICES SHALL BE PROVIDE BY E.C.. ALL WIRING FOR CONTROLS AND INSTRUMENTATION SHALL BE PROVIDED BY THE CONTRACTOR INSTALLING THE DEVICE. FOR EQUIPMENT WITH BUILT IN DISCONNECTS, E.C. SHALL PROVIDE WIRING AND TERMINATIONS TO EQUIPMENT MOUNTED DISCONNECT. 9. ALL WIRING, DEVICES AND OTHER LIKE MATERIALS SHALL BE LISTED AND LABELED BY A THIRD-PARTY TESTING AGENCY. THIRD PARTY ALL WIRING, DEVICES AND OTHER LIKE MATERIALS SHALL BE LISTED AND LABELED BY A THIRD-PARTY TESTING AGENCY. THIRD PARTY AGENCIES SHALL BE ONE OF THOSE ACCREDITED BY THE NCBCC (NORTH CAROLINA BUILDING CODE COUNCIL) TO LABEL ELECTRICAL AND MECHANICAL EQUIPMENT AND MARKED FOR INTENDED USE. ALL MATERIALS SHALL MEET THE NEC FOR THE INTENDED USE AND ALL MATERIALS SHALL MEET THE NEC FOR THE INTENDED USE AND INSTALLED IN ACCORDANCE WITH THE NEC. ALL ELECTRICAL MATERIALS, DEVICES, APPLIANCES, AND EQUIPMENT TO BE EVALUATED FOR SAFETY AND SUITABILITY FOR INTENDED USE. CURRENT LIST OF NCBCC ACCREDITED NRTL AGENCIES SHALL BE OBTAINED FROM THE DEPARTMENT OF INSURANCE WEBSITE. 10. PROVIDE THHN/THWN COPPER WIRE (UL 83 LISTED). PROVIDE A MINIMUM WIRE SIZE OF #12. ALL WIRE #8 AWG AND LARGER SHALL PROVIDE THHN/THWN COPPER WIRE (UL 83 LISTED). PROVIDE A MINIMUM WIRE SIZE OF #12. ALL WIRE #8 AWG AND LARGER SHALL BE STRANDED, #10 AWG AND SMALLER SHALL BE SOLID. CONDUCTORS AND CONDUIT ON PLANS AND SCHEDULES REFLECT AMPACITIES PER NEC TABLE 310.16 75C RATING. CONTRACTOR SHALL VERIFY ALL TERMINATIONS, LUGS, ETC. ARE RATED FOR USE PER NEC 110.14(C). OTHERWISE PROVIDE CONDUCTOR AND CONDUIT SIZED PER LOWEST TEMPERATURE RATING OF ANY TERMINATION WITHIN A CIRCUIT. A SEPARATE INSULATED EQUIPMENT GROUNDING CONDUCTOR SHALL BE PROVIDED FOR ALL CIRCUITS. ALL EQUIPMENT FEEDERS SHALL BE RUN CONTINUOUS FROM THE BREAKER TO THE DISCONNECT SWITCH; SPLICES ARE NOT ALLOWED. 11. COLOR CODING OF WIRE SHALL BE AS FOLLOWS: COLOR CODING OF WIRE SHALL BE AS FOLLOWS: 240/120V PHASE A BLACK PHASE A BLACK BLACK PHASE B RED RED NEUTRAL WHITE WHITE EQ. GROUND GREEN GREEN 12. PROVIDE LABELS ON ALL RECEPTACLES IDENTIFYING PANEL AND CIRCUIT NUMBER. LABELS SHALL BE BRADY CLEAR POLYESTER 1"W X PROVIDE LABELS ON ALL RECEPTACLES IDENTIFYING PANEL AND CIRCUIT NUMBER. LABELS SHALL BE BRADY CLEAR POLYESTER 1"W X 0.375"H OR PANDUIT EQUAL, WITH BLACK LETTERING. MARK ALL JUNCTION BOXES ABOVE CEILING INDICATING PANEL AND CIRCUIT NUMBER USING PERMANENT MARKER. PROVIDE PHENOLIC LABEL ON EXTERIOR BOXES WITH EQUIPMENT DESCRIPTION, AND PANEL AND CIRCUIT NUMBER. BOXES SHALL NOT BE INSTALLED IN AN INACCESSIBLE LOCATION. 13. PROVIDE MINIMUM 3/4" CONDUIT FOR ALL WIRING. ALL RACEWAYS SHALL BE INSTALLED WITHIN WALLS, INCLUDING BLOCK, UNLESS PROVIDE MINIMUM 3/4" CONDUIT FOR ALL WIRING. ALL RACEWAYS SHALL BE INSTALLED WITHIN WALLS, INCLUDING BLOCK, UNLESS NOTED OTHERWISE. FLEXIBLE METAL CONDUIT WITH A MAXIMUM LENGTH OF 6' MAY BE USED FOR THE CONNECTION OF LIGHT FIXTURES TO JUNCTION BOXES. EMT OR RIGID SHALL BE USED WHERE EXPOSED TO PHYSICAL DAMAGE. CONDUIT ABOVE GRADE SHALL BE STEEL. CONDUIT BELOW GRADE MAY BE PVC CHANGING TO STEEL IN THE ELBOW TURNING UP. EMT SHALL NOT BE USED IN DIRECT CONTACT WITH THE EARTH, WHERE EXPOSED TO SEVERE PHYSICAL DAMAGE, OR ANY OUTDOOR LOCATION. FITTINGS ON EMT CONDUIT SHALL BE COMPRESSION TYPE. FITTINGS ON IMC OR RGS SHALL BE THREADED. MOTOR CONNECTIONS SHALL BE MADE WITH FMC, MIN. 18" LONG AND MAX 36". USE PVC JACKETED FLEXIBLE LIQUID TIGHT CONDUIT TYPE UA FOR CONNECTIONS IN WET LOCATIONS. EXPOSED CONDUIT IN FINISHED ROOMS SHALL BE SUPPORTED TO WALL SURFACE WITH APPROVED PIPE STRAPS OR CLAMPS. IMC AND RGS SHALL TERMINATE WITH EITHER A DOUBLE LOCKNUT/BUSHING SET, OR A THREADED HUB. SEAL SERVICE RACEWAYS ENTERING A BUILDING FROM AN UNDERGROUND SYSTEM PER NEC 230.8 AND 300.5(G). WHERE CONCENTRIC, ECCENTRIC OR OVER-SIZED KNOCKOUTS ARE ENCOUNTERED, A GROUNDING-TYPE INSULATED BUSHING SHALL BE PROVIDED AND JUMPER SIZED PER NEC TABLE 250-122 AND LUGGED TO THE BOX. ALL CONDUITS SHALL BE PROVIDED WITH INSULATED THROAT. EMT CONDUIT PROVIDED BELOW ROOF DECK SHALL BE INSTALLED 1-1/2 INCHES AWAY FROM THE DECK TO AVOID SCREWS PENETRATING THE EMT CONDUIT DURING RE-ROOFING. ALL EMPTY RACEWAYS SHALL BE PROVIDED WITH PULL STRING. LOCATE JUNCTION AND PULL BOXES SUCH THAT THEY REMAIN ACCESSIBLE AFTER ALL CONSTRUCTION WORK IS COMPLETE. 14. PROVIDE ONE-INCH CONDUITS EXTENDING TO ATTIC FOR ALL TELEPHONE AND DATA OUTLETS SHOWN ON PLANS. PROVIDE PROTECTIVE PROVIDE ONE-INCH CONDUITS EXTENDING TO ATTIC FOR ALL TELEPHONE AND DATA OUTLETS SHOWN ON PLANS. PROVIDE PROTECTIVE BUSHINGS ON ENDS OF CONDUIT. SEE PLAN DETAILS FOR CABLE REQUIREMENTS AT EACH LOCATION. PROVIDE 12 INCH SERVICE LOOP ABOVE EACH OUTLET. 15. PROVIDE 3/4-INCH EMPTY CONDUITS TERMINATING ABOVE THE CEILING FOR ALL HVAC THERMOSTATS. JUNCTION BOXES SHALL MATCH PROVIDE 3/4-INCH EMPTY CONDUITS TERMINATING ABOVE THE CEILING FOR ALL HVAC THERMOSTATS. JUNCTION BOXES SHALL MATCH ORIENTATION OF THERMOSTATS PROVIDED BY M.C.. MOUNT JUNCTION BOXES 48-INCHES A.F.F. UNLESS NOTED OTHERWISE. PROVIDE PROTECTIVE BUSHINGS ON ENDS OF CONDUIT. 16. PANELBOARDS FOR SERVICE ENTRANCE SHALL BE SERVICE ENTRANCE RATED. PROVIDE NEMA 3R PANELBOARDS WHERE LOCATED PANELBOARDS FOR SERVICE ENTRANCE SHALL BE SERVICE ENTRANCE RATED. PROVIDE NEMA 3R PANELBOARDS WHERE LOCATED OUTSIDE. PROVIDE COPPER NEUTRAL AND GROUNDING BARS IN ALL PANELBOARDS UNLESS NOTED OTHERWISE (ALUMINUM IS NOT ALLOWED). GROUND ALL SERVICE ENTRANCE PANELS AND RACEWAYS (BONDING BUSHINGS) IN ACCORDANCE WITH THE NEC. PROVIDE BOLT-IN BREAKERS UNLESS NOTED OTHERWISE. PROVIDE A MINIMUM OF THREE SPARE 3/4" CONDUITS TO ABOVE CEILING FOR ALL FLUSH MOUNTED PANELBOARDS. PANELS SHALL BE FULLY RATED FOR SHORT CIRCUIT CURRENT, SERIES RATINGS ARE NOT ALLOWED. IF PANEL FEEDER SUPPLY LOCATION IS NOT EVIDENT, PROVIDE LABEL ON PANEL STATING, "POWER SUPPLY FOR PANEL "XX" ORIGINATES AT "XX"." PANEL TRIMS SHALL BE HINGED OR DOOR-IN-DOOR TO ALLOW ACCESS TO WIRING WITHOUT REMOVING TRIM. 17. PROVIDE MACHINE TYPED PANEL SCHEDULES IN EACH PANEL INDICATING THE SPECIFIC LOAD DESCRIPTION FOR EACH BREAKER PER PROVIDE MACHINE TYPED PANEL SCHEDULES IN EACH PANEL INDICATING THE SPECIFIC LOAD DESCRIPTION FOR EACH BREAKER PER NEC 408.4 (GENERAL DESCRIPTIONS SUCH AS "RECEPTACLE" ARE NOT ALLOWED. INDICATE ROOM NUMBERS FOR EACH LOAD.) LABEL PANELS ON PANEL FACE WITH PHENOLIC LABELS INDICATING PANEL NUMBER OR LETTER DESIGNATION, VOLTAGE, CURRENT RATING AND PHASE. PROVIDE ALL PANELBOARDS, SWITCHBOARDS, CONTROL PANELS, ETC. WITH WARNING SIGN FOR POTENTIAL ELECTRIC ARC FLASH HAZARDS PER NEC 110.16. PROVIDE PHENOLIC LABEL FOR SUB-PANELS DENOTING POWER SOURCE PER NEC 408.4(B) READING "FED FROM PANEL "-". 18. GROUND RODS SHALL BE COPPER CLAD STEEL, DIAMETER OF 3/4" x 10' LENGTH MINIMUM. SPACE RODS SUCH THAT THERE IS A GROUND RODS SHALL BE COPPER CLAD STEEL, DIAMETER OF 3/4" x 10' LENGTH MINIMUM. SPACE RODS SUCH THAT THERE IS A MINIMUM OF 10 FEET SPACING BETWEEN RODS. DRIVE RODS 6 INCHES BELOW GRADE. PROVIDE A MINIMUM OF ONE TEST WELL AT A GROUND ROD. CONNECTIONS TO RODS SHALL BE BY EXOTHERMIC WELDS OR COMPRESSION CONNECTORS. GROUNDING TO BUILDING STEEL FOR SERVICE CONNECTION AND ANY SEPARATELY DERIVED SYSTEM SHALL BE BY EXOTHERMIC WELD. 19. PROVIDE HEAVY DUTY FUSED AND NON-FUSED DISCONNECT SWITCHES AS INDICATED ON PLANS. DISCONNECTS LOCATED OUTSIDE SHALL PROVIDE HEAVY DUTY FUSED AND NON-FUSED DISCONNECT SWITCHES AS INDICATED ON PLANS. DISCONNECTS LOCATED OUTSIDE SHALL BE NEMA-3R. PROVIDE REJECTION CLIPS IN FUSED DISCONNECTS. LABEL DISCONNECT WITH PHENOLIC LABEL INDICATING PANEL AND CIRCUIT NUMBER FEEDING EQUIPMENT. 20. PROVIDE LIGHTING AS SCHEDULED IN THE FIXTURE SCHEDULE OR OTHERWISE NOTED ON PLANS. LIGHTING INSTALLED IN SUSPENDED PROVIDE LIGHTING AS SCHEDULED IN THE FIXTURE SCHEDULE OR OTHERWISE NOTED ON PLANS. LIGHTING INSTALLED IN SUSPENDED CEILINGS SHALL BE SUPPORTED INDEPENDENTLY OF THE CEILING GRID SYSTEM WITH #12 WIRE. SECURE FIXTURES TO CEILING FRAMING MEMBER BY MECHANICAL MEANS PER NEC 410.36. LIGHTING CIRCUITS SHALL NOT SHARE NEUTRALS. LED FIXTURES SHALL CONTAIN COMPONENTS THAT ARE MODULAR IN DESIGN AND EASILY REPLACEABLE/UPGRADABLE. COORDINATE LOCATION OF EXTERIOR FIXTURES WITH ARCHITECTURAL ELEVATION DRAWINGS. THE E.C. SHALL BE RESPONSIBLE FOR ENSURING ALL COMPONENTS (FIXTURES, LED DRIVERS, AND CONTROLS) ARE FULLY COMPATIBLE PRIOR TO ORDERING. PROVIDE ALL REQUIRE MOUNTING HARDWARE, CONNECTORS, AND FIXTURE OPTIONS TO PROVIDE A COMPLETE AND OPERATIONAL INSTALLATION. 21. FIXTURE WHIPS TO DIMMABLE LED DRIVERS SHALL BE A MAXIMUM OF 6-FEET LONG, PRE-MANUFACTURED WITH CONTROL WIRING FIXTURE WHIPS TO DIMMABLE LED DRIVERS SHALL BE A MAXIMUM OF 6-FEET LONG, PRE-MANUFACTURED WITH CONTROL WIRING INTERNAL TO THE FMC MEETING BOTH UL AND NEC REQUIREMENTS. THE CONTROL WIRING SHALL MEET NEC SECTION 300.3(C)(1) AND 725.136. CLASS 2 OR 3 CIRCUITS SHALL BE 16/2 PVC JACKETED WITH GRAY AND PURPLE STRANDED CONDUCTORS. 22. PROVIDE EMERGENCY AND EXIT LIGHTS AS SHOWN ON PLANS. PER NFPA 101 SECTION 7.10.1.9. POWER SHALL BE PROVIDED FROM PROVIDE EMERGENCY AND EXIT LIGHTS AS SHOWN ON PLANS. PER NFPA 101 SECTION 7.10.1.9. POWER SHALL BE PROVIDED FROM LIGHTING CIRCUITS ON THE UNSWITCHED LEG OF THE CIRCUIT SUCH THAT POWER TO THE EMERGENCY AND EXIT LIGHTS IS NOT DISCONNECTED WHEN NORMAL LIGHTING IS OFF. EXTERIOR EMERGENCY LIGHTS SHALL BE WIRED SUCH THAT PHOTOCELL AND/OR TIME CLOCK OPERATION DOES NOT DISCONNECT POWER TO BATTERIES. EMERGENCY UNIT EQUIPMENT AND BATTERIES SHALL BE UL924 LISTED FOR 90 MINUTES. BATTERIES SHALL BE TESTED PER NEC 700.12(A). 23. OCCUPANCY SENSORS IN RESTROOMS AND CORRIDORS SHALL BE ULTRASONIC ONLY. SENSOR LOCATIONS ARE APPROXIMATE; REFER TO OCCUPANCY SENSORS IN RESTROOMS AND CORRIDORS SHALL BE ULTRASONIC ONLY. SENSOR LOCATIONS ARE APPROXIMATE; REFER TO MANUFACTURER'S INSTALLATION INSTRUCTIONS. ULTRASONIC SENSORS SHALL NOT BE LOCATED CLOSER THAN 4 FEET FROM AIR SUPPLY/RETURN REGISTERS. VERIFY ALL COVERAGE AREAS OF SENSORS AS THEY VARY BETWEEN MANUFACTURERS. ALL REQUIRED POWER PACKS AND OTHER ACCESSORIES SHALL BE PROVIDED FOR A COMPLETE OPERATIONAL SYSTEM. INSTALL CONTROL DEVICES/POWER PACKS IN ACCESSIBLE J-BOX. OCCUPANCY SENSOR DEVICES INDICATED ON THE PLANS SHOW THE INTENT FOR LIGHTING CONTROL AND MINIMUM DEVICE REQUIREMENTS. THE CONTRACTOR SHALL BE RESPONSIBLE FOR COORDINATING WITH THE OCCUPANCY SENSOR MANUFACTURER TO DETERMINE PROPER TECHNOLOGY AND PLACEMENT OF THE SENSORS. ADDITIONAL SENSOR DEVICES MAY BE REQUIRED BEYOND THOSE SHOWN ON THE PLANS TO PROVIDE COMPLETE COVERAGE OF THE SPACE, WHICH SHALL BE PROVIDED AT NO COST TO THE OWNER. 19. RECEPTACLES SHALL BE FEDERAL SPECIFICATION GRADE, 20 AMP, 120V, AND MOUNTED VERTICALLY UNLESS NOTED OTHERWISE. RECEPTACLES SHALL BE FEDERAL SPECIFICATION GRADE, 20 AMP, 120V, AND MOUNTED VERTICALLY UNLESS NOTED OTHERWISE. RECEPTACLES MOUNTED OVER COUNTERS, BACK-SPLASHES, ETC. SHALL BE MOUNTED HORIZONTALLY. 20. RECEPTACLES WITHIN 6 FT. OF THE EDGE OF SINKS & LAVATORIES SHALL BE GROUND FAULT CIRCUIT-INTERRUPTING. ALL KITCHEN RECEPTACLES WITHIN 6 FT. OF THE EDGE OF SINKS & LAVATORIES SHALL BE GROUND FAULT CIRCUIT-INTERRUPTING. ALL KITCHEN RECEPTACLES, INDOOR WET LOCATIONS, LOCKER ROOMS WITH SHOWERS, GARAGES, SERVICE BAYS AND THOSE RECEPTACLES FEEDING VENDING MACHINES AND WATER COOLERS SHALL BE PROVIDED WITH GROUND FAULT CIRCUIT-INTERRUPTER PROTECTION. 21. RECEPTACLES INSTALLED OUTSIDE OR IN WET LOCATIONS SHALL BE LISTED AS WEATHER-RESISTANT TYPE AND HAVE GROUND FAULT RECEPTACLES INSTALLED OUTSIDE OR IN WET LOCATIONS SHALL BE LISTED AS WEATHER-RESISTANT TYPE AND HAVE GROUND FAULT CIRCUIT-INTERRUPTER PROTECTION. PROVIDE WITH "IN USE", CAST ALUMINUM WEATHERPROOF COVERS IDENTIFIED AS "EXTRA DUTY" PER NEC 406.9(B). 22.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .