Scissor Lift and Trailer - Salient Characteristics.pdf

SALIENT CHARACTERISTICS

Scissor Lift – Genie GS-1932 or Equal

Must not exceed an overall width of 2 feet 8 inches (32 inches) / 0.81 meters – This is to ensure the lift can fit through a personnel door.

Must not exceed a total length of 6 feet (72 inches) / 1.83 meter – This is to ensure that the lift can fit through personnel doors and into hallways.

Must not exceed a stowed height (rails lowered) of 5 feet 11 inches (69 inches) / 1.8 meters – This is to ensure the lift can fit through a personnel door.

Must extend upward to a platform height of at least 19 feet 3 inches / 5.85 meters – this is the height of much of our work and the entire purpose for the machine.

The platform and machine must be able to support a minimum of 1,400 pounds of load.

The working platform must be able to extend out a minimum of 3 feet / ~1 meter – This allows the workers to reach over obstacles.

As this equipment will be used inside buildings without much ventilation, it must be battery powered with hydraulic controls.

For recharging purposes, the battery should be charge by 110-volt, 120 volt, or 125-volt and up to, but not exceed, 20 amperes.

This equipment must be self-propelled.

Trailer – Pratt EZ-1065 or Equal

The trailer must be a single axle trailer.

The trailer must have hydraulic lifting/lowering capabilities – This will alleviate any safety hazards when loading and unloading the lift.

The trailer must be able to support the weight of the scissor lift.

The trailer must utilize a 2-5/16 inch ball hitch or pintle hook with an 18-inch ground clearance.

The trailer must have front and side rails for safety.