Schedule_B_(4).pdf

PDF 653 KB Posted

Attached to
WASTEWATER TESTING Federal contract opportunity
Solicitation number
140R4022Q0040
Issued by
Department of the Interior Bureau of Reclamation

View the file

Other files for this federal contract opportunity

Other files attached to WASTEWATER TESTING, newest first.
File Type Posted
Sol_140R4022Q0040_Amd_0001.pdf PDF
FinalPermitGCPPDS2022.pdf PDF
2017_AZPDES_Permit_-_WWTP.pdf PDF
Sol_140R4022Q0040.pdf PDF
SOW__Clauses__Wage_Determination.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Schedule B

Base Year: June 1, 2022-May 31, 2023

Wastewater Treatment Plant (WWTP)

Table 1: Effluent Limitations and Monitoring Requirements (Monthly)

Parameter Monitoring

Frequency

Quantity Unit Price Total

Biochemical Oxygen Demand

(BOD)(effluent)

1x/monthly 12

Biochemical Oxygen Demand

(BOD)(Influent)

1x/monthly 12

Total Suspended Solids (TSS)

(Effluent)

1x/monthly 12

Total suspended Solids (TSS)

(Influent)

1x/monthly 12

Total Cost

Table 2: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (Quarterly)

Parameter Monitoring Frequency Quantity Unit Price Total Ammonia 1x/quarterly 4

Biochemical Oxygen

Demand (BOD)

1x/quarterly 4

Nitrate/Nitrite (as N) 1x/quarterly 4

Nitrogen, Total Kjeldahl

(TKN)

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Phosphorus 1x/quarterly 4

Total Dissolved Solids

(TDS) (Influent)

1x/quarterly 4

Total Suspended Solids

(TSS) (Effluent)

1x/quarterly 4

*Hardness 1x/quarterly 4

Total Cost

* Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving water is present at the time of sampling, the effluent must be tested for hardness instead. Please see the hardness definition in Appendix A, Part B. Note: When reporting the hardness on the

Discharge Monitoring report, enter Code "9" (Conditional Monitoring) for either the effluent or receiving water hardness that was not tested.

Table 3: Effluent Limitations and Monitoring Requirements (Semi-Annual)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Cyanide 1x/6 months 2

Selenium 1x/6 months 2

Total Dissolved Solids

(TDS) (Source Water)

1x/6 months 2

Total Dissolved Solids

(TDS) (Effluent)

1x/6 months 2

*Arsenic 1x/6 months 2

*Mercury 1x/6 months 2

**Sulfides 1x/6 months 2

**Hydrogen Sulfide 1x/6 months 2

***Hardness 1x/6 months 2

Total Cost

* All metals effluent limits are for total recoverable metals, except for chromium VI, for which the assessment levels listed are dissolved.

**Sulfides/hydrogen sulfide detection above 100/µg/L triggers monthly monitoring for the remainder of the permit.

*** Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving water is present at the time of sampling, the effluent must be tested for hardness instead. Please see the hardness definition in Appendix A, Part B. Note: When reporting the hardness on the Discharge Monitoring report, enter Code "9" (Conditional Monitoring) for either the effluent or receiving water hardness that was not tested.

Table 4: WET Testing

Parameter Monitoring Frequency Unit Price Total *Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

Upon Request by

Reclamation Personnel

*Chronic Toxicity Pimephales promelas (fathead minnow)

*Chronic Toxicity Ceriodaphnia dubia (water flea)

Total Cost

*If chronic toxicity is detected above the Action Levels (1.6 TUc – Daily Maximum, 1.0 TUc –

Monthly Median) or an acute test fails, the permittee must perform follow-up testing. The requirement for an acute test applies when duration of discharge doesn’t allow for chronic tests to be conducted.

Table 5: Toxicity Characteristic Leaching Procedure Test (TCLP) (Annual)

Parameter Monitoring Frequency Quantity Unit Price Total

Metals

Arsenic 1x/year 1

Barium 1x/year 1

Cadmium 1x/year 1

Chromium 1x/year 1

*Chromium IV 1x/year 1

Lead 1x/year 1

Mercury 1x/year 1

Selenium 1x/year 1

Silver 1x/year 1

Volatiles and Semi-Volatiles

Benzene 1x/year 1

Carbon Tetrachloride 1x/year 1

Chlorobenzene 1x/year 1

Chloroform 1x/year 1

1,2-Dichloroethylene 1x/year 1

1,1-Dichloroethylene 1x/year 1

Methylethylketone 1x/year 1

Tetrachloroethylene 1x/year 1

Vinyl Chloride 1x/year 1

1,4-Dichlorobenzene 1x/year 1

**o-cresol 1x/year 1

**m-cresol 1x/year 1

**p-cresol 1x/year 1

**Cresol (total) 1x/year 1

2,4-Dinitrotoluene 1x/year 1

Hexachlorobenzene 1x/year 1

Hexachloroethane 1x/year 1

Nitrobenzene 1x/year 1

Pentachlorophenol 1x/year 1

Pyridine 1x/year 1

2,4,5-Trichlorophenol 1x/year 1

2,4,6-Trichlorophenol 1x/year 1

Herbicides/Pesticides

2,4-D 1x/year 1

2,4,5-TP (Silvex) 1x/year 1

Chlordane 1x/year 1

Endrin 1x/year 1

Heptachlor 1x/year 1

Heptachlor epoxide 1x/year 1

Lindane 1x/year 1

Methoxychlor 1x/year 1

Toxaphene 1x/year 1

Total Cost

* If Chromium exceeds 8µg/L, sampling for chromium VI will be conducted for the remainder of the permit. In this event, the contractor shall provide the hexavalent chromium preservative, ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

**If o-, m-, and p-Cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. The regulatory level of total cresol is 200 mg/L.

Power Plant Drainage Sump (PPDS)

Table 1: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (Quarterly)

*Parameter Monitoring Frequency Quantity Unit Price Total

Hardness (CaCO3)

Receiving water

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Total Suspended Solids

(TSS)

1x/quarterly 4

Cadmium 1x/quarterly 4

Selenium 1x/quarterly 4

Mercury 1x/quarterly 4

Lead 1x/quarterly 4

Total Dissolved Solids

(TDS) (Source Water)

1x/quarterly 4

Total Dissolved Solids

(TDS) (Effluent)

1x/quarterly 4

Total Cost

*All metals effluent Assessment Levels are for total recoverable metals.

Table 2: Effluent Limitations and Monitoring Requirements (Annual)

*If Chromium exceeds 8µg/L, sampling for chromium VI will be conducted for the remainder of the permit. In this event, the contractor shall provide the hexavalent chromium preservative, Parameter Monitoring Frequency Quantity Unit Price Total

Nitrate/ Nitrite (as N) 1x/year 1

Nitrogen, Total Kjeldahl

(TKN)

1x/year 1

Oil and Grease 1x/year 1

Phosphorus 1x/year 1

Total Dissolved Solids

(TDS)

1x/year 1

Total Suspended Solids

(TSS)

1x/year 1

Antimony 1x/year 1

Arsenic 1x/year 1

Beryllium 1x/year 1

Chromium 1x/year 1

*Chromium VI 1x/year 1

Copper 1x/year 1

Iron 1x/year 1

Nickel 1x/year 1

Silver 1x/year 1

Thallium 1x/year 1

Zinc 1x/year 1

Hardness 1x/year 1

Cyanide 1x/year 1 ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

* All metals analyses shall be for total recoverable metals, except chromium VI, which is dissolved.

Table 3: Effluent Characterization Testing (Periodic/Specific)

Parameter Monitoring Frequency Unit Price Total Biochemical Oxygen Demand Upon Request by

Chemical Oxygen Demand

(COD)

Organic Carbon, total (TOC) Upon Request by

Table 4: WET Testing

Parameter Monitoring Frequency Unit Price Total *Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

Monthly Median) or an acute test fails, the permittee must perform follow-up testing.

Total Pricing for Base Year Table Costs

Table Total

WWTP Table 1: Effluent Limitations and Monitoring Requirements

WWTP Table 2: Effluent Limitations and Monitoring

Requirements/Trace Substance Monitoring Requirements

WWTP Table 3: Effluent Limitations and Monitoring Requirements

WWTP Table 4: WET Testing

WWTP Table 5: Toxicity Characteristic Leaching Procedure Test

(TCLP)

PPDS Table 1: Effluent Limitations and Monitoring

PPDS Table 2: Effluent Limitations and Monitoring Requirements

PPDS Table 3: Effluent Characterization Testing

PPDS Table 4: Additional WET Testing

Option Year 1: June 1, 2023-May 31, 2024

Wastewater Treatment Plant (WWTP)

Table 1: Effluent Limitations and Monitoring Requirements (Monthly)

Parameter Monitoring

Frequency

Quantity Unit Price Total

Biochemical Oxygen Demand

(BOD)(effluent)

1x/monthly 12

Biochemical Oxygen Demand

(BOD)(Influent)

1x/monthly 12

Total Suspended Solids (TSS)

(Effluent)

1x/monthly 12

Total suspended Solids (TSS)

(Influent)

1x/monthly 12

Total Cost

Table 2: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (Quarterly)

Parameter Monitoring Frequency Quantity Unit Price Total Ammonia 1x/quarterly 4

Biochemical Oxygen

Demand (BOD)

1x/quarterly 4

Nitrate/Nitrite (as N) 1x/quarterly 4

Nitrogen, Total Kjeldahl

(TKN)

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Phosphorus 1x/quarterly 4

Total Dissolved Solids

(TDS) (Influent)

1x/quarterly 4

Total Suspended Solids

(TSS) (Effluent)

1x/quarterly 4

*Hardness 1x/quarterly 4

Total Cost

* Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving

Table 3: Effluent Limitations and Monitoring Requirements (Semi-Annual)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Cyanide 1x/6 months 2

Selenium 1x/6 months 2

Total Dissolved Solids

(TDS) (Source Water)

1x/6 months 2

Total Dissolved Solids

(TDS) (Effluent)

1x/6 months 2

*Arsenic 1x/6 months 2

*Mercury 1x/6 months 2

**Sulfides 1x/6 months 2

**Hydrogen Sulfide 1x/6 months 2

***Hardness 1x/6 months 2

Total Cost

* All metals effluent limits are for total recoverable metals, except for chromium VI, for which the assessment levels listed are dissolved.

**Sulfides/hydrogen sulfide detection above 100/µg/L triggers monthly monitoring for the remainder of the permit.

*** Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving water is present at the time of sampling, the effluent must be tested for hardness instead. Please see the hardness definition in Appendix A, Part B. Note: When reporting the hardness on the Discharge Monitoring report, enter Code "9" (Conditional Monitoring) for either the effluent or receiving water hardness that was not tested.

Table 4: Effluent Characterization Testing (Specified Years 23, 24, 25)

Parameter Monitoring Frequency Quantity Unit Price Total Antimony 1x/year 1

Beryllium 1x/year 1

Cadmium 1x/year 1

Chromium 1x/year 1

*Chromium VI 1x/year 1

Copper 1x/year 1

Iron 1x/year 1

Lead 1x/year 1

Nickel 1x/year 1

Selenium 1x/year 1

Silver 1x/year 1

Thallium 1x/year 1

Zinc 1x/year 1

Hardness 1x/year 1

Cyanide 1x/year 1

Total Cost

* All metals effluent limits are for total recoverable metals, except for chromium VI, for which the assessment levels listed are dissolved.

*If Chromium exceeds 8µg/L, sampling for chromium VI will be conducted for the remainder of the permit. In this event, the contractor shall provide the hexavalent chromium preservative, ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

Table 5: WET Testing

Parameter Monitoring Frequency Unit Price Total *Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

Monthly Median) or an acute test fails, the permittee must perform follow-up testing. The requirement for an acute test applies when duration of discharge doesn’t allow for chronic tests to be conducted.

Table 6: Toxicity Characteristic Leaching Procedure Test (TCLP) (Annual)

Parameter Monitoring Frequency Quantity Unit Price Total

Metals

Arsenic 1x/year 1

Barium 1x/year 1

Cadmium 1x/year 1

Chromium 1x/year 1

*Chromium IV 1x/year 1

Mercury 1x/year 1

Silver 1x/year 1

Volatiles and Semi-Volatiles

Benzene 1x/year 1

Carbon Tetrachloride 1x/year 1

Chlorobenzene 1x/year 1

Chloroform 1x/year 1

1,2-Dichloroethylene 1x/year 1

1,1-Dichloroethylene 1x/year 1

Methylethylketone 1x/year 1

Tetrachloroethylene 1x/year 1

Vinyl Chloride 1x/year 1

1,4-Dichlorobenzene 1x/year 1

**o-cresol 1x/year 1

**m-cresol 1x/year 1

**p-cresol 1x/year 1

**Cresol (total) 1x/year 1

2,4-Dinitrotoluene 1x/year 1

Hexachlorobenzene 1x/year 1

Hexachloroethane 1x/year 1

Nitrobenzene 1x/year 1

Pentachlorophenol 1x/year 1

Pyridine 1x/year 1

2,4,5-Trichlorophenol 1x/year 1

2,4,6-Trichlorophenol 1x/year 1

Herbicides/Pesticides

2,4-D 1x/year 1

2,4,5-TP (Silvex) 1x/year 1

Chlordane 1x/year 1

Endrin 1x/year 1

Heptachlor 1x/year 1

Heptachlor epoxide 1x/year 1

Lindane 1x/year 1

Methoxychlor 1x/year 1

Toxaphene 1x/year 1

* If Chromium exceeds 8µg/L, sampling for chromium VI will be conducted for the remainder of the permit. In this event, the contractor shall provide the hexavalent chromium preservative, ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

**If o-, m-, and p-Cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. The regulatory level of total cresol is 200 mg/L.

Power Plant Drainage Sump (PPDS)

Table 1: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (Quarterly)

*Parameter Monitoring Frequency Quantity Unit Price Total

Hardness (CaCO3)

Receiving water

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Total Suspended Solids

(TSS)

1x/quarterly 4

Cadmium 1x/quarterly 4

Selenium 1x/quarterly 4

Mercury 1x/quarterly 4

Lead 1x/quarterly 4

Total Dissolved Solids

(TDS) (Source Water)

1x/quarterly 4

Total Dissolved Solids

(TDS) (Effluent)

1x/quarterly 4 ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

* All metals analyses shall be for total recoverable metals, except chromium VI, which is dissolved.

Parameter Monitoring Frequency Quantity Unit Price Total

Nitrate/ Nitrite (as N) 1x/year 1

Nitrogen, Total Kjeldahl

(TKN)

1x/year 1

Oil and Grease 1x/year 1

Phosphorus 1x/year 1

Total Dissolved Solids

(TDS)

1x/year 1

Total Suspended Solids

(TSS)

1x/year 1

Antimony 1x/year 1

Arsenic 1x/year 1

Beryllium 1x/year 1

Chromium 1x/year 1

*Chromium VI 1x/year 1

Copper 1x/year 1

Iron 1x/year 1

Nickel 1x/year 1

Silver 1x/year 1

Thallium 1x/year 1

Zinc 1x/year 1

Hardness 1x/year 1

Table 3: Effluent Characterization Testing (Periodic/Specific)

Parameter Monitoring Frequency Unit Price Total

Parameter Monitoring Frequency Unit Price Total *Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

Option Year 2: June 1, 2024-May 31, 2025

Table 1: Effluent Limitations and Monitoring Requirements (monthly)

Parameter Monitoring Frequency Quantity Unit Price Total Biochemical Oxygen

Demand (BOD)(effluent)

1x/monthly 12

Biochemical Oxygen

Demand (BOD)(Influent)

1x/monthly 12

Total Suspended Solids

(TSS) (Effluent)

1x/monthly 12

Total suspended Solids

(TSS) (Influent)

1x/monthly 12

WWTP Table 4: Effluent Characterization Testing

WWTP Table 5: WET Testing

WWTP Table 6: Toxicity Characteristic Leaching Procedure Test

Table 2: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (quarterly)

Parameter Monitoring Frequency Quantity Unit Price Total Ammonia 1x/quarterly 4

Biochemical Oxygen

Demand (BOD)

1x/quarterly 4

Nitrate/Nitrite (as N) 1x/quarterly 4

Nitrogen, Total Kjeldahl

(TKN)

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Phosphorus 1x/quarterly 4

Total Dissolved Solids

(TDS) (Influent)

1x/quarterly 4

Total Suspended Solids

(TSS) (Effluent)

1x/quarterly 4

*Hardness 1x/quarterly 4

Total Cost

* Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving water is present at the time of sampling, the effluent must be tested for hardness instead. Please see the hardness definition in Appendix A, Part B. Note: When reporting the hardness on the

Discharge Monitoring report, enter Code "9" (Conditional Monitoring) for either the effluent or receiving water hardness that was not tested.

Table 3: Effluent Limitations and Monitoring Requirements (Semi-Annual)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Cyanide 1x/6 months 2

Selenium 1x/6 months 2

Total Dissolved Solids

(TDS) (Source Water)

1x/6 months 2

Total Dissolved Solids

(TDS) (Effluent)

1x/6 months 2

*Arsenic 1x/6 months 2

*Mercury 1x/6 months 2

**Sulfides 1x/6 months 2

**Hydrogen Sulfide 1x/6 months 2

***Hardness 1x/6 months 2

* All metals effluent limits are for total recoverable metals, except for chromium VI, for which the assessment levels listed are dissolved.

**Sulfides/hydrogen sulfide detection above 100/µg/L triggers monthly monitoring for the remainder of the permit.

*** Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving water is present at the time of sampling, the effluent must be tested for hardness instead. Please see the hardness definition in Appendix A, Part B. Note: When reporting the hardness on the Discharge Monitoring report, enter Code "9" (Conditional Monitoring) for either the effluent or receiving water hardness that was not tested.

Table 4: Effluent Characterization Testing (Specified Year 23, 24, 25)

Parameter Monitoring Frequency Quantity Unit Price Total Antimony 1x/year 1

Beryllium 1x/year 1

Cadmium 1x/year 1

Chromium 1x/year 1

*Chromium VI 1x/year 1

Copper 1x/year 1

Iron 1x/year 1

Lead 1x/year 1

Nickel 1x/year 1

Selenium 1x/year 1

Silver 1x/year 1

Thallium 1x/year 1

Zinc 1x/year 1

Hardness 1x/year 1

Cyanide 1x/year 1

Total Cost

* All metals effluent limits are for total recoverable metals, except for chromium VI, for which the assessment levels listed are dissolved.

*If Chromium exceeds 8µg/L, sampling for chromium VI will be conducted for the remainder of the permit. In this event, the contractor shall provide the hexavalent chromium preservative, ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

Table 5: WET Testing

*Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

* Toxicity Pimephales promelas

(fathead minnow)

Monthly Median) or an acute test fails, the permittee must perform follow-up testing. The requirement for an acute test applies when duration of discharge doesn’t allow for chronic tests to be conducted.

Table 6: Toxicity Characteristic Leaching Procedure Test (TCLP) (Annual)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Metals

Arsenic 1x/year 1

Barium 1x/year 1

Cadmium 1x/year 1

Chromium 1x/year 1

*Chromium IV 1x/year 1

Lead 1x/year 1

*Mercury 1x/year 1

Selenium 1x/year 1

Silver 1x/year 1

Volatiles and Semi-Volatiles

Benzene 1x/year 1

Carbon Tetrachloride 1x/year 1

Chlorobenzene 1x/year 1

Chloroform 1x/year 1

1,2-Dichloroethylene 1x/year 1

1,1-Dichloroethylene 1x/year 1

Methylethylketone 1x/year 1

Tetrachloroethylene 1x/year 1

Vinyl Chloride 1x/year 1

1,4-Dichlorobenzene 1x/year 1

**o-cresol 1x/year 1

**m-cresol 1x/year 1

**p-cresol 1x/year 1

**Cresol (total) 1x/year 1

2,4-Dinitrotoluene 1x/year 1

Hexachlorobenzene 1x/year 1

Hexachloroethane 1x/year 1

Nitrobenzene 1x/year 1

Pentachlorophenol 1x/year 1

Pyridine 1x/year 1

2,4,5-Trichlorophenol 1x/year 1

2,4,6-Trichlorophenol 1x/year 1

Herbicides/Pesticides

2,4-D 1x/year 1

2,4,5-TP (Silvex) 1x/year 1

Chlordane 1x/year 1

Endrin 1x/year 1

Heptachlor 1x/year 1

Heptachlor epoxide 1x/year 1

Lindane 1x/year 1

Methoxychlor 1x/year 1

Toxaphene 1x/year 1

Total Cost

* If Chromium exceeds 8µg/L, sampling for chromium VI will be conducted for the remainder of the permit. In this event, the contractor shall provide the hexavalent chromium preservative, ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

**If o-, m-, and p-Cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. The regulatory level of total cresol is 200 mg/L.

Power Plant Drainage Sump (PPDS)

Table 1: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (quarterly)

*Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Hardness (CaCO3)

Receiving water

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Total Suspended Solids

(TSS)

1x/quarterly 4

Cadmium 1x/quarterly 4

Selenium 1x/quarterly 4

Mercury 1x/quarterly 4

Lead 1x/quarterly 4

Total Dissolved Solids

(TDS) (Source Water)

1x/quarterly 4

Total Dissolved Solids

(TDS) (Effluent)

1x/quarterly 4

All metals effluent Assessment Levels are for total recoverable metals.

ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

* All metals analyses shall be for total recoverable metals, except chromium VI, which is dissolved.

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Nitrate/ Nitrite (as N) 1x/year 1

Nitrogen, Total Kjeldahl

(TKN)

1x/year 1

Oil and Grease 1x/year 1

Phosphorus 1x/year 1

Total Dissolved Solids

(TDS)

1x/year 1

Total Suspended Solids

(TSS)

1x/year 1

Antimony 1x/year 1

Arsenic 1x/year 1

Beryllium 1x/year 1

Chromium 1x/year 1

*Chromium VI 1x/year 1

Copper 1x/year 1

Iron 1x/year 1

Lead 1x/year 1

Mercury 1x/year 1

Nickel 1x/year 1

Selenium 1x/year 1

Silver 1x/year 1

Thallium 1x/year 1

Zinc 1x/year 1

Hardness 1x/year 1

Table 3: Effluent Characterization Testing (Periodic/Specific)

Table 4: Additional WET Testing

Parameter Monitoring Frequency Unit Price Total *Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

Total Pricing for Option Year 2 Table Costs

WWTP Table 2: Effluent Limitations and Monitoring Requirements/Trace

Substance Monitoring Requirements

WWTP Table 5: WET Testing

WWTP Table 6: Toxicity Characteristic Leaching Procedure Test (TCLP)

PPDS Table 1: Effluent Limitations and Monitoring Requirements/Trace

Option Year 3: June 1, 2025-May 31, 2026

Table 1: Effluent Limitations and Monitoring Requirements (Monthly)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Biochemical Oxygen

Demand (BOD)(effluent)

1x/monthly 12

Biochemical Oxygen

Demand (BOD)(Influent)

1x/monthly 12

Total Suspended Solids

(TSS) (Effluent)

1x/monthly 12

Total suspended Solids

(TSS) (Influent)

1x/monthly 12

Table 2: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (Quarterly)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Ammonia 1x/quarterly 4

Biochemical Oxygen

Demand (BOD)

1x/quarterly 4

Nitrate/Nitrite (as N) 1x/quarterly 4

Nitrogen, Total Kjeldahl

(TKN)

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Phosphorus 1x/quarterly 4

Total Dissolved Solids

(TDS) (Influent)

1x/quarterly 4

Total Suspended Solids

(TSS) (Effluent)

1x/quarterly 4

*Hardness

Total Cost

* Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving

Table 3: Effluent Limitations and Monitoring Requirements (Semi-Annual)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Cyanide 1x/6 months 2

Selenium 1x/6 months 2

Total Dissolved Solids

(TDS) (Source Water)

1x/6 months 2

Total Dissolved Solids

(TDS) (Effluent)

1x/6 months 2

*Arsenic 1x/6 months 2

*Mercury 1x/6 months 2

**Sulfides 1x/6 months 2

**Hydrogen Sulfide 1x/6 months 2

***Hardness 1x/6months 2

Total Cost

* All metals effluent limits are for total recoverable metals, except for chromium VI, for which the assessment levels listed are dissolved.

**Sulfides/hydrogen sulfide detection above 100/µg/L triggers monthly monitoring for the remainder of the permit.

*** Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving water is present at the time of sampling, the effluent must be tested for hardness instead. Please see the hardness definition in Appendix A, Part B. Note: When reporting the hardness on the Discharge Monitoring report, enter Code "9" (Conditional Monitoring) for either the effluent or receiving water hardness that was not tested.

Table 4: Effluent Characterization Testing (Specified Year 23, 24, 25)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Antimony 1x/year 1

Beryllium 1x/year 1

Cadmium 1x/year 1

Chromium 1x/year 1

*Chromium VI 1x/year 1

Copper 1x/year 1

Iron 1x/year 1

Lead 1x/year 1

Nickel 1x/year 1

Thallium 1x/year 1

Zinc 1x/year 1

Hardness 1x/year 1

Cyanide 1x/year 1

Total Cost

* All metals effluent limits are for total recoverable metals, except for chromium VI, for which the assessment levels listed are dissolved.

*If Chromium exceeds 8µg/L, sampling for chromium VI will be conducted for the remainder of the permit. In this event, the contractor shall provide the hexavalent chromium preservative, ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

Table 5: WET Testing

Parameter Monitoring Frequency Unit Price Total *Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

Monthly Median) or an acute test fails, the permittee must perform follow-up testing. The requirement for an acute test applies when duration of discharge doesn’t allow for chronic tests to be conducted.

Table 6: Toxicity Characteristic Leaching Procedure Test (TCLP) (Annual)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Metals

Arsenic 1x/year 1

Barium 1x/year 1

Cadmium 1x/year 1

Chromium 1x/year 1

*Chromium IV 1x/year 1

*Mercury 1x/year 1

Volatiles and Semi-Volatiles

Benzene 1x/year 1

Carbon Tetrachloride 1x/year 1

Chlorobenzene 1x/year 1

Chloroform 1x/year 1

1,2-Dichloroethylene 1x/year 1

1,1-Dichloroethylene 1x/year 1

Methylethylketone 1x/year 1

Tetrachloroethylene 1x/year 1

Vinyl Chloride 1x/year 1

1,4-Dichlorobenzene 1x/year 1

**o-cresol 1x/year 1

**m-cresol 1x/year 1

**p-cresol 1x/year 1

**Cresol (total) 1x/year 1

2,4-Dinitrotoluene 1x/year 1

Hexachlorobenzene 1x/year 1

Hexachloroethane 1x/year 1

Nitrobenzene 1x/year 1

Pentachlorophenol 1x/year 1

Pyridine 1x/year 1

2,4,5-Trichlorophenol 1x/year 1

2,4,6-Trichlorophenol 1x/year 1

Herbicides/Pesticides

2,4-D 1x/year 1

2,4,5-TP (Silvex) 1x/year 1

Chlordane 1x/year 1

Endrin 1x/year 1

Heptachlor 1x/year 1

Heptachlor epoxide 1x/year 1

Lindane 1x/year 1

Methoxychlor 1x/year 1

Toxaphene 1x/year 1

If Chromium exceeds 8µg/L, sampling for chromium VI will be conducted for the remainder of the permit. In this event, the contractor shall provide the hexavalent chromium preservative, ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

**If o-, m-, and p-Cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. The regulatory level of total cresol is 200 mg/L.

Power Plant Drainage Sump (PPDS)

Table 1: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (Quarterly)

*Parameter Monitoring Frequency Quantity Unit Price Total Hardness (CaCO3)

Receiving water

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Total Suspended Solids

(TSS)

1x/quarterly 4

Cadmium 1x/quarterly 4

Selenium 1x/quarterly 4

Mercury 1x/quarterly 4

Lead 1x/quarterly 4

Total Dissolved Solids

(TDS) (Source Water)

1x/quarterly 4

Total Dissolved Solids

(TDS) (Effluent)

1x/quarterly 4 ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

* All metals analyses shall be for total recoverable metals, except chromium VI, which is dissolved.

Table 3: Effluent Characterization Testing (Periodic/Specific)

Parameter Monitoring Frequency Unit Price Total

Parameter Monitoring

Frequency

Quantity Unit Price Total

Nitrate/ Nitrite (as N) 1x/year 1

Nitrogen, Total

Kjeldahl (TKN)

1x/year 1

Oil and Grease 1x/year 1

Phosphorus 1x/year 1

Total Dissolved Solids

(TDS)

1x/year 1

Total Suspended

Solids (TSS)

1x/year 1

Antimony 1x/year 1

Arsenic 1x/year 1

Beryllium 1x/year 1

Chromium 1x/year 1

*Chromium VI 1x/year 1

Copper 1x/year 1

Iron 1x/year 1

Nickel 1x/year 1

Silver 1x/year 1

Thallium 1x/year 1

Zinc 1x/year 1

Hardness 1x/year 1

Parameter Monitoring Frequency Unit Price Total *Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

Total Pricing for Option Year 3

WWTP Table 2: Effluent Limitations and Monitoring Requirements/Trace

WWTP Table 5: WET Testing

WWTP Table 6: Toxicity Characteristic Leaching Procedure Test (TCLP)

PPDS Table 1: Effluent Limitations and Monitoring Requirements/Trace

Option Year 4: June 1, 2026-May 31, 2027

Option Year 1: June 1, 2023-May 31, 2024

Wastewater Treatment Plant (WWTP)

Table 1: Effluent Limitations and Monitoring Requirements (Monthly)

Parameter Monitoring

Frequency

Quantity Unit Price Total

Biochemical Oxygen Demand

(BOD)(effluent)

1x/monthly 12

Biochemical Oxygen Demand

(BOD)(Influent)

1x/monthly 12

Total Suspended Solids (TSS)

(Effluent)

1x/monthly 12

Total suspended Solids (TSS)

(Influent)

1x/monthly 12

Total Cost

Table 2: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (Quarterly)

Parameter Monitoring Frequency Quantity Unit Price Total Ammonia 1x/quarterly 4

Biochemical Oxygen

Demand (BOD)

1x/quarterly 4

Nitrate/Nitrite (as N) 1x/quarterly 4

Nitrogen, Total Kjeldahl

(TKN)

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Phosphorus 1x/quarterly 4

Total Dissolved Solids

(TDS) (Influent)

1x/quarterly 4

Total Suspended Solids

(TSS) (Effluent)

1x/quarterly 4

*Hardness 1x/quarterly 4

Total Cost

* Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving

Table 3: Effluent Limitations and Monitoring Requirements (Semi-Annual)

Parameter Monitoring

Frequency

Quantity Unit

Price

Total

Cyanide 1x/6 months 2

Selenium 1x/6 months 2

Total Dissolved Solids

(TDS) (Source Water)

1x/6 months 2

Total Dissolved Solids

(TDS) (Effluent)

1x/6 months 2

*Arsenic 1x/6 months 2

*Mercury 1x/6 months 2

**Sulfides 1x/6 months 2

**Hydrogen Sulfide 1x/6 months 2

***Hardness 1x/6 months 2

Total Cost

* All metals effluent limits are for total recoverable metals, except for chromium VI, for which the assessment levels listed are dissolved.

**Sulfides/hydrogen sulfide detection above 100/µg/L triggers monthly monitoring for the remainder of the permit.

*** Assessment levels listed are based on a hardness of 400 mg/L as CaCO3. The receiving water must be tested for hardness at the same time that these metal samples are taken. If no receiving water is present at the time of sampling, the effluent must be tested for hardness instead. Please see the hardness definition in Appendix A, Part B. Note: When reporting the hardness on the Discharge Monitoring report, enter Code "9" (Conditional Monitoring) for either the effluent or receiving water hardness that was not tested.

Table 4: WET Testing

Parameter Monitoring Frequency Unit Price Total *Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

Monthly Median) or an acute test fails, the permittee must perform follow-up testing. The requirement for an acute test applies when duration of discharge doesn’t allow for chronic tests to be conducted.

Table 5: Toxicity Characteristic Leaching Procedure Test (TCLP) (Annual)

Parameter Monitoring Frequency Quantity Unit Price Total

Metals

Arsenic 1x/year 1

Barium 1x/year 1

Cadmium 1x/year 1

Chromium 1x/year 1

*Chromium IV 1x/year 1

Lead 1x/year 1

Mercury 1x/year 1

Selenium 1x/year 1

Silver 1x/year 1

Volatiles and Semi-Volatiles

Benzene 1x/year 1

Carbon Tetrachloride 1x/year 1

Chlorobenzene 1x/year 1

Chloroform 1x/year 1

1,2-Dichloroethylene 1x/year 1

1,1-Dichloroethylene 1x/year 1

Methylethylketone 1x/year 1

Tetrachloroethylene 1x/year 1

Vinyl Chloride 1x/year 1

1,4-Dichlorobenzene 1x/year 1

**o-cresol 1x/year 1

**m-cresol 1x/year 1

**p-cresol 1x/year 1

**Cresol (total) 1x/year 1

2,4-Dinitrotoluene 1x/year 1

Hexachlorobenzene 1x/year 1

Hexachloroethane 1x/year 1

Nitrobenzene 1x/year 1

Pentachlorophenol 1x/year 1

Pyridine 1x/year 1

2,4,5-Trichlorophenol 1x/year 1

2,4,6-Trichlorophenol 1x/year 1

Herbicides/Pesticides

2,4-D 1x/year 1

2,4,5-TP (Silvex) 1x/year 1

Chlordane 1x/year 1

Endrin 1x/year 1

Heptachlor 1x/year 1

Heptachlor epoxide 1x/year 1

Lindane 1x/year 1

Methoxychlor 1x/year 1

Toxaphene 1x/year 1

Total Cost

* If Chromium exceeds 8µg/L, sampling for chromium VI will be conducted for the remainder of the permit. In this event, the contractor shall provide the hexavalent chromium preservative, ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

**If o-, m-, and p-Cresol concentrations cannot be differentiated, the total cresol (D026) concentration is used. The regulatory level of total cresol is 200 mg/L.

Power Plant Drainage Sump (PPDS)

Table 1: Effluent Limitations and Monitoring Requirements/Trace Substance

Monitoring Requirements (Quarterly)

*Parameter Monitoring Frequency Quantity Unit Price Total

Hardness (CaCO3)

Receiving water

1x/quarterly 4

Oil and Grease 1x/quarterly 4

Total Suspended Solids

(TSS)

1x/quarterly 4

Cadmium 1x/quarterly 4

Selenium 1x/quarterly 4

Mercury 1x/quarterly 4

Lead 1x/quarterly 4

Total Dissolved Solids

(TDS) (Source Water)

1x/quarterly 4

Total Dissolved Solids

(TDS) (Effluent)

1x/quarterly 4

Total Cost

Parameter Monitoring Frequency Quantity Unit Price Total

Nitrate/ Nitrite (as N) 1x/year 1

Nitrogen, Total Kjeldahl

(TKN)

1x/year 1

Oil and Grease 1x/year 1

Phosphorus 1x/year 1

Total Dissolved Solids

(TDS)

1x/year 1

Total Suspended Solids

(TSS)

1x/year 1

Antimony 1x/year 1

Arsenic 1x/year 1

Beryllium 1x/year 1

Chromium 1x/year 1

*Chromium VI 1x/year 1

Copper 1x/year 1

Iron 1x/year 1

Nickel 1x/year 1

Silver 1x/year 1

Thallium 1x/year 1

Zinc 1x/year 1

Hardness 1x/year 1 ammonium sulfate buffer solution, with the chromium VI sample kit. Otherwise, monitoring for chromium VI is not required.

* All metals analyses shall be for total recoverable metals, except chromium VI, which is dissolved.

Table 3: Effluent Characterization Testing (Periodic/Specific)

Parameter Monitoring Frequency Unit Price Total

Parameter Monitoring Frequency Unit Price Total *Chronic Toxicity:

Pseudokirchneriella subcapitata

(Green Algae)

Total Contract Pricing for Base and Four Options

WWTP Table 4: WET Testing

WWTP Table 5: Toxicity Characteristic Leaching Procedure Test

PPDS Table 4: Additional WET Testing

Total Cost

Year Total

Base Year

Option Year 1

Option Year 2

Option Year 3

Option Year 4

Total Cost for Base and 4 Options

File details come from the government source that posted it. Updated .