SB1341-16-RQ-0527_-COMBINED_SYNOPSIS_SOLICITATION_-_Photometry_Bench.pdf

RFQ NUMBER SB1341-16-RQ-0527

Photometry Bench

THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS

PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-

STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR

COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION

INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY

SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE

WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THIS

SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION

PROCEDURES UNDER THE AUTHORITY OF FAR 13.

This solicitation is a request for quotation. The solicitation document incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005- 88, effective May 16 2016.

The associated North American Industrial Classification System (NAICS) code for this procurement is 334519 with a small business size of 500 employees.

This acquisition is 100% set-aside for small business.

In accordance with the non-manufacturer rule, the contractor shall be a small business under the applicable size standard and shall provide either its own product or that of another domestic small business manufacturing or processing concern. See FAR 19.102(f) for additional information.

1352.215-72 INQUIRIES (APR 2010)

Offerors must submit all questions concerning this solicitation in writing to forest.crumpler@nist.gov. Questions should be received no later than 5 calendar days after the issuance date of this solicitation. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation.

Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract. The backup point of contact is Patrick Staines at Patrick.Staines@nist.gov.

(End of Provision)

LIST OF ATTACHMENTS:

The following specifications are hereby provided as attachments. The purpose of these attachments is for reference and to provide specification requirements to the Contractor for quotation purposes only.

All attachments included in this solicitation are owned by the Government and shall not be reproduced, released, distributed, or otherwise utilized for any purpose other than submission of a quotation and the execution of the required work without the prior written approval of the NIST Contracting Officer.

mailto:forest.crumpler@nist.gov mailto:Patrick.Staines@nist.gov

Attachment A: Drawing #1 Attachment B: Drawing #2 Attachment C: Drawing #3 Attachment D: SP250

All offerors shall provide a quotation for the following line item: (All equipment must be new.

Used, refurbished, prototype, or remanufactured will not be considered for award).

BACKGROUND:

The National Institute of Standards and Technology (NIST), Physical Measurement Laboratory, sensor Science division, Optical Radiation Group maintains, improves, and disseminates the national scales for the candela (SI base unit), spectral responsivity, reflectance, transmission, color, and appearance. Staff participate in national and international committees and inter-comparisons to ensure the acceptance of US radiometric, photometric, colorimetric, and spectrophotometric standards and measurements. The Group also develops protocols for the calibration and validation of optical remote sensing instruments, performs long-term research, and maintains the infrastructure necessary to ensure the advancement of radiometry, photometry, colorimetry, and spectrophotometry measurement technology.

NIST has utilized a photometry bench for many years to perform calibrations for absolute outputs of light sources and for responsivities of various photometers and detectors (see attached SP250).

Increased demands on our calibration services have motivated us to build a new Photometry Bench to improve measurement quality, extend our capabilities, and increase automation.

This acquisition is for a Photometry Bench.

The Contractor shall provide a Firm Fixed Price quotation for the following Contract Line Items (CLIN):

Deliverable Description Quantity/Media Date Required CLIN 0001 Design, Manufacture and Installation of a

Photometry Bench/Motion Control System, as described below.

One (1) item No later than 9 months ARO

OPTION -

CLIN 0002

A 1 m (travel direction) x 0.6 m metric optical breadboard that is mounted on the Photometer Stage.

One (1) item

OPTION -

CLIN 0003

A 1.8 m (travel direction) x 0.75 m metric optical breadboard that is mounted on the Source Stage.

OPTION -

CLIN 0004

An encoder head mounted on the short base with the Source Stage to read the position on the long linear encoder. Note even though the Source Stage is not designed to move along the linear encoder, this encoder reader will help us to monitor position creep of the Source Stage over long periods of time.

CLIN Descriptions:

(CLIN) Contract Line Item 0001 – Photometry Bench;

The basic configuration of the new Photometry Bench we envision is shown in the attached drawing No. 1, where the dimensions of the laboratory is shown. The new, T-shaped Photometry Bench (shown in gold) is mainly composed of a long base and a short base. The long base is for installing a long rail system for moving a carriage that is used to mount a Photometer translation stage with 0.8 m travel (shown in blue). The short base, oriented perpendicular to the long base is used to mount a Source translation stage with 1.5 m travel (shown in blue). The dimensions of Photometer stage and Source stage are shown in the attached Drawings No. 2 and No. 3, respectively. Note, NIST already purchased the Photometer Stage, the Source Stage, their motor drivers, and software. The load capacity of the NIST laboratory floor is 200 lbs.

The new Photometry bench shall meet the minimum requirements below:

1. The long rail system shall provide motion for the moving carriage with the Photometer Stage along the direction intersecting the Source Stage with a range of at least 5 m.

2. The 5 m motion shall be provided by a ball screw to provide vibration-free positioning and to simply the cable management.

3. The ball screw shall be covered to avoid oil contamination to the laboratory.

4. The moving carriage with the Photometer Stage shall have a maximum speed of at least 3 cm/s.

5. The maximum width of the long base shall not exceed 0.80 meter for easy accessing to the central working area.

6. The long base shall be extended by approximately 300 mm beyond the end of the range of travel as indicated by the red rectangle in the attached drawing No. 1. The extended area shall have a M6, 25 mm x 25 mm metric hole pattern for mounting standstill alignment lasers and telescopes. A standard optical breadboard may be used.

7. The load capacity of the moving carriage for mounting the Photometer Stage is greater than 750 lbs.

8. An absolute linear encoder for the 5 m rail system is required.

9. The position of the moving carriage with the Photometer Stage shall be measured over the whole range of 5 m motion with an uncertainty of +/- 50 micrometers or 5 parts in 105, whichever is larger.

10. The positioning repeatability of the moving carriage shall be better than +/- 100 micrometers.

11. The optical axis is defined as a line parallel to the direction of the 5 m travel, and having a height of 1.4 m above the laboratory floor. We plan to mount a photometer on the Photometer Stage and a source on the Source Stage, both aligned on the optical axis. We require the photometer alignment to remain within +/-500 micrometers of the optical axis at all points along the distance of travel. We also require the distance error between the photometer and source resulting from the roll, pitch, and yaw, of the moving carriage to be within +/- 50 micrometers at all positions along the distance of travel. Both of these requirements refer to a stationary status, not during motion.

12. The position specifications shall be maintained over a temperature range of 25 °C +/- 1.5 °C.

13. The load capacity of the short base for supporting the Source Stage shall be greater than 900 lbs.

14. The short base shall be long enough to encompass the Source Stage (with 2 m long mounting base) plus a 1.8 m long breadboard mounted on the stage that travels over the range +/- 0.75 m.

15. The short base shall be extended at both ends by at least 400 mm beyond the end of the range of travel as indicated by the red rectangles in the attached Drawing No. 1. The extended area shall have a M6, 25 mm x 25 mm metric hole pattern for mounting standstill alignment lasers and telescopes. A standard optical breadboard may be used.

16. The short base shall be extended by 800 mm x 800 mm in the middle as indicated by the red rectangle in the attached Drawing No. 1. The extended area shall have a M6, 25 mm x 25 mm metric hole pattern for mounting a standstill light trap, alignment laser, and alignment telescope. A standard optical breadboard may be used.

17. The top mounting surfaces of the Photometer Stage and the Source Stage of the Photometry bench shall be approximately 0.7 m high above the laboratory floor.

18. The Photometer Stage shall be able to move within 1 cm of the Source Stage.

19. The motion control system for the 5 m rail system shall utilize Aerotech motor, Aerotech

Ensemble HPE Series PWM digital motor drivers and LabVIEW software so that it is compatible with the existing Aerotech Photometer Stage and Source Stage. Note, NIST has also purchased Aerotech Ensemble HPE Series PWM digital motor drivers and LabVIEW software for the Photometer Stage and Source Stage. No additional controller is needed for the integration of all three motion systems.

20. All the motions shall be controlled by LabVIEW programs.

21. The system shall manage at least 3 AC power cords, 5 x USB cables, 1 Ethernet cable, and one GPIB cable attached to the Photometer Stage; The cable management system shall be hidden below the rails so that it does not affect access to the Photometry bench from every side of the long base and short base.

22. The Photometry bench shall include five removable lightweight breadboards that can slide on the two rails and can be removed easily.

23. The removable breadboard shall be automatically centered using the two rails and is lockable at any location along the entire 5 m travel.

24. Position of the removable breadboard should be repeatable within +/- 1 mm if possible.

25. The breadboards shall have a standard metric hole pattern.

26. The length of the Photometry bench shall not exceed 7 m, and the width of the Photometer bench shall not exceed 4 m.

27. The Photometry bench shall have mounting holes (or other means) along each side of the long and short bases for mounting small breadboards and other brackets.

28. All mounting holes and screws of the Photometry bench shall be standard metric.

29. The entire system shall be transportable to an upper floor laboratory by the manufacturer using only an elevator measuring 87” wide by 96” high by 60” deep with a door measuring 59” wide by 90” high and a stairwell capable of accommodating long thin semi-flexible objects, like rails and encoders, up to 6 m long.

30. The complete Photometry bench including the Photometer Stage and Source Stage shall be installed onsite by the manufacturer in a condition ready for acceptance testing. During the installation both Photometer Stage and Source Stage shall be aligned so that their motions are at 90 degrees ± 10 arc-seconds to the direction of 5 m rail system.

31. Emergency stop switches shall be installed for all motions if possible in addition to the one on the motion controller.

OPTION LINE ITEMS

Contract Line items 0002 - 0004 are option line items. The Contractor must provide a firm-fixed price for the option line item. Pricing for the option line item shall remain valid for a period of 6 months after receipt of award.

The Government may, at their discretion, exercise the option line item at the time of award. The Government is not obligated to exercise the option line item.

OPTION LINE ITEM (CLIN) Contract Line Item 0002 - A 1 m (travel direction) x 0.6 m metric optical breadboard mounted on the Photometer Stage.

OPTION LINE ITEM (CLIN) Contract Line Item 0003 - A 1.8 m (travel direction) x 0.75 m metric optical breadboard mounted on the Source Stage.

OPTION LINE ITEM (CLIN) Contract Line Item 0004 - An encoder head mounted on the short base with the Source Stage to read the position on the long linear encoder. Note even though the Source Stage is not designed to move along the linear encoder, this encoder reader will help us to monitor position creep of the Source Stage over long periods of time.

Delivery/Installation:

Deliverable 1: The Contractor shall provide a draft drawing to the identified Technical Point of Contact (TPOC to be assigned at award) prior to beginning fabrication. The drawing must be provided electronically to the TPOC not later than 2 weeks after receipt of the award. The TPOC will review and provide feedback or approval not later than 1 week after receipt of drawing.

Deliverable 2: The Contractor shall provide the test data to the identified Technical Point of

Contact (TPOC to be assigned at award) prior to shipment. The drawing must be provided electronically to the TPOC. The TPOC will review and provide feedback or approval not later than 1 week after receipt of drawing.

Deliverable 3: The Contractor shall deliver and install the completed system not later than 9 months after award

Delivery must be FOB DESTINATION (Gaithersburg, MD). The contractor is responsible for ensuring all associated deliverables are received and installed on-site no later than 9 months after award of the contract. Delivery shall be to the following address:

National Institute of Standards and Technology (NIST) Building 220 Rm B317 100 Bureau Drive Gaithersburg, MD 20899

The system shall be installed by the manufacturer and meet contract specifications no later than 30 days after delivery. Installation, at a minimum, shall include uncrating/un-packaging of all equipment, rigging, set-up and hook-up of the system, demonstration of all specifications, and removal of trash. Onsite installation and demonstration shall be done at NIST, Gaithersburg, MD, Building 220, Room B317.

Express Warranty:

The contractor shall warrant the entire system for a period of at least one year. The warranty must include unlimited telephone/e-mail support for questions regarding operation. All costs including parts, labor, travel, and other expenses necessary to repair the system will be borne solely by the contractor at no additional cost to the U.S. Government during the warranty period.

Inspection and Acceptance:

In addition to the inspection and acceptance terms articulated in 52.212-4, the Government reserves the right to perform such performance tests and evaluations as defined below to verify specified system performance. Such tests and evaluations, if performed, shall be conducted within the environment that the system is operated. The Contractor has the right to be present during the tests and evaluations, if performed, at the Contractors expense.

The following performance measurements are required:

Prior to Delivery/Installation:

Contractor will test the completed motion control system to ensure it meets all specifications. NIST may be in attendance for these tests, at the expense of NIST.

During/following Delivery and Installation:

The tests include, but are not limited to, measurement of the relative positions of the Source and Photometer Stages using laser interferometry. These tests are to be performed, by NIST, in collaboration with the Dimensional Metrology Group. All specifications will be evaluated upon installation and acceptance will be provided within 20 business days of installation.

Due Date for Quotations

Offerors shall submit their quotations so that NIST receives them not later than 3:30 p.m.

Eastern Time on August 8, 2016. FAX quotations shall not be accepted. E- mail quotations shall be accepted at forest.crumpler@nist.gov. Offeror’s quotations shall not be deemed received by the Government until the quotation is entered into the e-mail address inbox set forth above.

Addendum to FAR 52.212-1, Quotation Preparation Instructions

1.) Technical Quotation:

The offeror shall submit an original and one copy of the technical quotation. If the quotation is submitted electronically, additional copies are not required. The technical quotation shall address the following:

Technical Capability:

The offeror shall submit a technical description or product literature for the system it is proposing, which clearly identifies each requirement listed above. The offeror must demonstrate that its proposed system meets or exceeds each minimum requirement described above by providing a citation to the relevant section of its technical description or product literature. The contractor must not simply state they will meet the requirement; evidence must be provided. If applicable, evidence that the Offeror is authorized by the original provider to provide the item(s) in the quotation should be included.

2.) Past Performance:

The offeror shall provide past performance information regarding relevant contracts over the past five (5) years with Federal, state, or local governments, or commercial customers. If the offeror intends to subcontract with another firm(s) for part of this requirement, that firm’s past performance information shall also be provided. If the offeror has no relevant past performance, it may include a statement to that effect in its quotation. The government reserves the right to consider data obtained from sources other than those described by the offeror in its quotation. It is recommended that approximately 3-5 contracts be referenced.

The description of each contract/order described in this section shall not exceed one half page in length. For each contract/order, the offeror shall provide the following information:

1. Contract number;

2. Description and relevance to solicitation requirements including dollar value;

3. Period of Performance – indicate by month and year the state and completion (or “ongoing”) dates for the contract;

4. Reference Contact – If a non-Government contract, identify the name and address of the client with current telephone number and email address of a point of contact of the client responsible for the contract;

5. Contracting Office – If a Government contract (Federal or state), identify the Procuring Contracting Officer (PCO), administrative Contracting Officer (ACO), and Contracting Officer’s Representative (COR), and their names, current telephone numbers and email addresses.

6. Problems Encountered – include information regarding information regarding any problems encountered on the contracts described above and corrective actions taken to resolve those problems.

3.) Experience:

The offeror shall demonstrate the extent to which it has recently manufactured, fabricated, and distributed similar equipment. Vendors shall submit a list of at least three similar systems supplied in the past five (5) years. Information shall include the model name/number, date of sale, end user name, and end user contact information.

4.) Price Quotation:

The offeror shall submit an original and one copy of the completed priced schedule quotation. If the quotation is submitted electronically, additional copies are not required. The pricing quotation shall be separate from any other portion of the quotation. The offeror shall propose a firm fixed-price, FOB Destination for each CLIN. Contractor shall state warranty coverage. Price quotations shall remain valid for a period of 90 days from the date quotations are due.

This is an Open-Market Combined Synopsis/Solicitation for the equipment identified above.

The Government intends to award a Purchase Order as a result of this Combined Synopsis/Solicitation that will include the terms and conditions that are set forth herein. In order to facilitate the award process, ALL quotes shall include a statement regarding the terms and conditions herein as follows:

a. The offeror shall state “The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition.”

OR

b. The offeror shall state “The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:”

Offeror shall list exception(s) and rationale for the exception(s)

Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the offeror’s FSS or GWAC contract, and the statement required above shall be included in the quotation;

The Dun and Bradstreet Number (DUNS number) for the quoter’s active System for Award Management (SAM) registration. Quoters must have an active registration at www.SAM.Gov to receive an award;

Quoters shall include a completed copy of the attached provision, “Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Any Federal Law (Class Deviation) (March 2015)” with their quotation.

QUOTATION EVALUATION

Evaluation Factors

Award shall be made to the offeror whose quotation offers the best value to the Government price and other factors considered. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Capability 2). Past Performance, 3) Experience, and 4) Price. All non-price factors, when combined, are equally important to price.

1. Technical Capability: No prototypes, demonstration models, used or refurbished instruments will be considered. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an offerors technical description and/or product literature does not indicate whether its proposed equipment meets a certain minimum requirement, and/or the offeror does not submit the test measurements/data from a real device, NIST will determine that it does not meet the requirements.

2. Past Performance: The Government will evaluate the Offeror's past performance information and, if appropriate, its proposed subcontractors' past performance to determine its relevance to the current requirement and the extent to which it demonstrates that the offeror has successfully completed relevant contracts in the past five years. In assessing the offeror's past performance information, NIST will evaluate, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction. Evaluation of this factor will be based on information contained in the technical portion of the quotation and information provided by references. The Government will evaluate past performance information by contacting appropriate references, including NIST references, if applicable. The Government may also consider other available information in evaluating the Offeror’s past performance. The Government will assign a neutral rating if the offeror has no relevant past performance information.

3. Experience: NIST will evaluate the extent of the offeror’s experience providing similar or same equipment as required above.

4. Price: The Government will evaluate price for reasonableness.

PROVISIONS AND CLAUSES:

Provisions:

Offerors shall complete annual representations and certifications on-line at www.sam.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items.

If paragraph (j) of the provision is applicable, a written submission is required.

52.252-1 Solicitation Provisions Incorporated by Reference

This contract incorporates one or more provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/.

52.204-7 – System for Award Management 52.212-1 – Instructions to Offerors-Commercial Items 52.212-3 – Offerors Representations and Certifications-Commercial Items 52.204-16 – Commercial & Government Entity Code Reporting 52.204-17 – Ownership or Control of Offeror 52.204-18 – Commercial & Government Entity Code Maintenance 52.204-19 – Incorporation by Reference of Representations and Certifications 52.219-1 - Small Business Program Representation

52.225-3 – Buy American Act – Free Trade Agreement – Israeli Trade Act

52.225-4 - Buy American –Free Trade Agreements –Israeli Trade Act Certificate:

Buy American -- Free Trade Agreements--Israeli Trade Act Certificate (May 2014)

(a) The offeror certifies that each end product, except those listed in paragraph (b) or (c) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product,” “commercially available off-the-shelf item,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act.”

(b) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or http://www.sam.gov/ http://www.acquisition.gov/far/

Israeli end products as defined in the clause of this solicitation entitled “Buy American--Free Trade Agreements--Israeli Trade Act”:

Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

Line Item No.: Country of Origin:

[List as necessary]

(c) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (b) of this provision) as defined in the clause of this solicitation entitled “Buy American--Free Trade Agreement--Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.”

Other Foreign End Products:

Line Item No.: Country of Origin:

[List as necessary]

(d) The Government will evaluate offers in accordance with the policies and procedures of Part 25 of the Federal Acquisition Regulation.

(End of provision)

52.203-98, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements—Representation (DEVIATION 2015-02)

Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements—Representation (FEB 2015)

(a) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.

(b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information.

(c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.

(End of provision)

Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Any Federal Law (Class Deviation) (March 2014)

(1) In accordance with Sections 536 and 537 of Division B of Public Law 113-76 Consolidated Appropriations Act, 2014, none of the funds made available by Consolidated Appropriations Act, 2014 funding may be used to enter into a contract with any corporation that-

(a) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and has made a determination that this further action is not necessary to protect the interests of the Government, or

(b) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government.

(2) The Offeror represents that, as of the date of this offer-

(a) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(b) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability.

(End of provision)

52.217-4 -- Evaluation of Options Exercised at Time of Contract Award.

As prescribed in 17.208(b), insert a provision substantially the same as the following:

Evaluation of Options Exercised at Time of Contract Award (Jun 1988)

Except when it is determined in accordance with FAR 17.206(b) not to be in the Government’s best interests, the Government will evaluate the total price for the basic requirement together with any option(s) exercised at the time of award.

(End of Provision)

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Items.

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Dec 2014)

(2) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004)(Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] __ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/17.htm#P183_30196 https://acquisition.gov/far/current/html/52_207_211.html#wp1146366 https://acquisition.gov/far/current/html/52_233_240.html#wp1113329 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t29t32+1665+30++%2831%29%20%20AND%20%28%2831%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_233_240.html#wp1113344 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_200_206.html#wp1137622 http://uscode.house.gov/ http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_200_206.html#wp1141983 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_200_206.html#wp1144881 https://acquisition.gov/far/current/html/52_200_206.html#wp1141649 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_200_206.html#wp1151163 https://acquisition.gov/far/current/html/52_200_206.html#wp1151299

(Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

_X_ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Aug 2013) (31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).

__ (10) [Reserved].

__ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

__ (ii) Alternate I (Nov 2011) of 52.219-3.

__ (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (ii) Alternate I (Jan 2011) of 52.219-4.

__ (13) [Reserved] _X_ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644).

__ (ii) Alternate I (Nov 2011).

__ (iii) Alternate II (Nov 2011).

__ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

__ (ii) Alternate I (Oct 1995) of 52.219-7.

__ (iii) Alternate II (Mar 2004) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).

__ (17)(i) 52.219-9, Small Business Subcontracting Plan (Oct 2014) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Oct 2001) of 52.219-9.

__ (iii) Alternate II (Oct 2001) of 52.219-9.

__ (iv) Alternate III (Oct 2014) of 52.219-9.

__ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011)(15 U.S.C. 644(r)).

__ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).

__ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C.

637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657 f).

_X_ (22) 52.219-28, Post Award Small Business Program Representation (Jul 2013) (15 U.S.C.

632(a)(2)).

__ (23) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Jul 2013) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Jul 2013) (15 U.S.C. 637(m)).

_X_ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

_X_ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2014) (E.O. 13126).

_X_ (27) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).

_X_ (28) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

__ (29) 52.222-35, Equal Opportunity for Veterans (Jul 2014)(38 U.S.C. 4212).

_X_ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

__ (31) 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212).

__ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act https://acquisition.gov/far/current/html/52_207_211.html#wp1140926 https://acquisition.gov/far/current/html/52_207_211.html#wp1145644 https://acquisition.gov/far/current/html/52_217_221.html#wp1135955 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1135955 https://acquisition.gov/far/current/html/52_217_221.html#wp1135970 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1135970 https://acquisition.gov/far/current/html/52_217_221.html#wp1136004 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1136017 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1136017 https://acquisition.gov/far/current/html/52_217_221.html#wp1136017 https://acquisition.gov/far/current/html/52_217_221.html#wp1136032 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1136058 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1136058 https://acquisition.gov/far/current/html/52_217_221.html#wp1136058 https://acquisition.gov/far/current/html/52_217_221.html#wp1136058 https://acquisition.gov/far/current/html/52_217_221.html#wp1136174 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_217_221.html#wp1136175 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1136186 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1136387 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1139913 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t13t16+492+90++%2815%29%20%20AND%20%28%2815%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_217_221.html#wp1144950 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_217_221.html#wp1144420 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_222.html#wp1147479 https://acquisition.gov/far/current/html/52_222.html#wp1147630 https://acquisition.gov/far/current/html/52_222.html#wp1147656 https://acquisition.gov/far/current/html/52_222.html#wp1147711 https://acquisition.gov/far/current/html/52_222.html#wp1158632 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t37t40+200+2++%2838%29%20%20AND%20%28%2838%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_222.html#wp1162802 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t29t32+2+78++%2829%29%20%20AND%20%28%2829%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_222.html#wp1148123 https://acquisition.gov/far/current/html/52_222.html#wp1160019

(Dec 2010) (E.O. 13496).

_X_ (33)(i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (34) 52.222-54, Employment Eligibility Verification (Aug 2013). (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

__ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (36)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-13.

__ (37)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-14.

__ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C.

8259b).

__ (39)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

_X_ (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

__ (41) 52.225-1, Buy American—Supplies (May 2014) (41 U.S.C. chapter 83).

__ (42)(i) 52.225-3, Buy American—Free Trade Agreements—Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C.

4001 note, Pub.

L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112- 42, and 112-43.

__ (ii) Alternate I (May 2014) of 52.225-3.

__ (iii) Alternate II (May 2014) of 52.225-3.

__ (iv) Alternate III (May 2014) of 52.225-3.

_X_ (43) 52.225-5, Trade Agreements (Nov 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X_ (44) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

__ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

__ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

__ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

__ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, https://acquisition.gov/far/current/html/52_222.html#wp1151848 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_222.html#wp1151848 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_222.html#wp1156645 https://acquisition.gov/far/current/html/Subpart%2022_18.html#wp1089948 https://acquisition.gov/far/current/html/52_223_226.html#wp1168892 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_223_226.html#wp1168892 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t41t42+250+1286++%2842%29%20%20AND%20%28%2842%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_223_226.html#wp1168933 https://acquisition.gov/far/current/html/52_223_226.html#wp1168933 https://acquisition.gov/far/current/html/52_223_226.html#wp1194330 https://acquisition.gov/far/current/html/52_223_226.html#wp1194330 https://acquisition.gov/far/current/html/52_223_226.html#wp1194323 http://uscode.house.gov/ http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_223_226.html#wp1179078 https://acquisition.gov/far/current/html/52_223_226.html#wp1179078 https://acquisition.gov/far/current/html/52_223_226.html#wp1188603 https://acquisition.gov/far/current/html/52_223_226.html#wp1192900 http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_223_226.html#wp1169038 http://uscode.house.gov/ http://uscode.house.gov/ http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t17t20+1727+50++%2819%29%20%20AND%20%28%2819%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t17t20+1727+50++%2819%29%20%20AND%20%28%2819%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/ http://uscode.house.gov/ http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_223_226.html#wp1169038 https://acquisition.gov/far/current/html/52_223_226.html#wp1169038 https://acquisition.gov/far/current/html/52_223_226.html#wp1169038 https://acquisition.gov/far/current/html/52_223_226.html#wp1169151 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t17t20+1727+50++%2819%29%20%20AND%20%28%2819%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t17t20+1727+50++%2819%29%20%20AND%20%28%2819%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_223_226.html#wp1169608 https://acquisition.gov/far/current/html/52_223_226.html#wp1192524 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t09t12+1445+65++%2810%20U.S.C.%202302%20Note%29%20%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_223_226.html#wp1173773 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t41t42+250+1286++%2842%29%20%20AND%20%28%2842%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_223_226.html#wp1173393 http://uscode.house.gov/uscode-cgi/fastweb.exe?getdoc+uscview+t41t42+250+1286++%2842%29%20%20AND%20%28%2842%29%20ADJ%20USC%29%3ACITE%20%20%20%20%20%20%20%20%20 https://acquisition.gov/far/current/html/52_232.html#wp1153230 http://uscode.house.gov/ http://uscode.house.gov/ https://acquisition.gov/far/current/html/52_232.html#wp1153252 http://uscode.house.gov/

10 U.S.C. 2307(f)).

_X_ (50) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Jul 2013) (31 U.S.C. 3332).

__ (51) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

__ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

__ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

__ (54)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

__ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] __ (1) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

__ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards—Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (May 2014) (41 U.S.C. chapter 67).

__ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services—Requirements (May 2014) (41 U.S.C. chapter 67).

__ (7) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O.13495).

__ (8) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792).

__ (9) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

__ (10) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) (Executive Order 13658).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records—Negotiation.

(1) The…