SATPC0043002 Tab 04 4 Specs.pdf

This document is an item specifications sheet for federal contract PR 4200944922 detailing detector component requirements for an instrument application. The procurement requires three detector types (hep1, hep2, and hep3) with specific quantities to order: 12 units of hep1, 12 units of hep2, and 24 units of hep3. Each detector type features n-type, ion-implantation construction with continuous aluminum metallization at 2,500 angstroms and a maximum dead layer of 0.5 micrometers.

The specifications differentiate among the three detector types primarily by physical dimensions and guard ring characteristics. The hep1 detectors measure 1.5mm thickness with a 2cm radius and 1.5mm guard ring width; hep2 detectors measure 3mm thickness with a 3cm radius and 3mm guard ring width; hep3 detectors measure 3mm thickness with a 4cm radius and 3mm guard ring width. All detectors require custom mounts per drawing, rigid-flex harnesses, and omnetics connectors. The document includes a visual representation showing detector configurations with four detectors at 1.5mm thickness and 2cm radius, two detectors at 3mm thickness and 3cm radius, and two detectors at 4.5mm thickness and 4cm radius.