SATPC0042485 Tab 04 4 SOW..pdf
PDF 170 KB Posted
- Attached to
- OMAX ProtoMax Abrasive Waterjet Federal contract opportunity
- Solicitation number
- 80NSSC26942036Q
About this file
This Statement of Work specifies the acquisition of an OMAX ProtoMax Abrasive Waterjet system for NASA Kennedy Space Center (KSC) in Florida. The requirement includes one ProtoMax unit (Part #317460) featuring a 12" x 12" x 1" table with a 5 HP direct drive pump operating continuously at 0.25 GPM at 30,000 PSI, capable of cutting up to 1" thickness across various materials. The system includes a 0.008" nozzle assembly, material holding clamps, a factory-assembled and tested machine on casters, pre-configured laptop with ProtoMAX control software, free lifetime software upgrades with unlimited seats, one 55lb bucket of ProtoMAX garnet abrasive, a one-year warranty, and shipping to the continental United States. Noise levels are approximately 76 decibels during underwater cutting operations.
The procurement also includes an optional ProtoMAX Power Package Spares and Accessories Kit (Part #318239-P) containing spare mixing tubes, jewel orifices, filters, a non-CE-rated powered drain water filter tank, a water spray kit, and six additional 55lb buckets of garnet abrasive. A step-up transformer is required to meet power requirements at the site. The place of performance is NASA Kennedy Space Center, FL 32899, with a period of performance of 30 days after receipt of order (ARO). No pricing information, set-asides, federal contract vehicles, or response deadlines are specified in this document.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0042485 Tab 10 RFQ Open Market Template.pdf | ||
| SATPC0042485 Tab 06 BNJ..pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements
This requirement is for the acquisition of the OMAX ProtoMax Abrasive Waterjet for NASA Kennedy Space Center (KSC). The information listed below is required to complete this purchase.
2. Characteristics, Scope, and Specs
QTY PART # DESCRIPTION
1 317460 OMAX ProtoMax AbrasiveJet - 12" x 12" x
1" Table w/5 HP Pump Includes the following:
1. 5 HP Direct Drive Pump, Continuous 0.25 GPM @ 30,000 PSI Operation.
2. 0.008" Nozzle Assembly (nozzle body, mixing tube, last-chance filter, and 0.008" jewel orifice)
3. Up to 1" cutting thickness over a variety of materials
4. Quiet/Clean underwater cutting (Approx.
76 db)
5. Material holding clamps for securing material
6. Includes laptop, pre-configured with ProtoMAX control software.
7. Machine is fully assembled at the factory and tested prior to shipping.
8. Pump and system are on casters for easy relocation.
9. Free Software Upgrades For Life & Unlimited Seats of Software
10. ProtoMAX Garnet Abrasive (55lb bucket)
11. 1 Year Warranty
12. Shipping to Continental US (Not including Alaska & Hawaii)
1 318239-P Options:
ProtoMAX - Power Pkg - Spares and Accessories Kit:
Includes additional consumables
- spare mixing tubes, extra jewel orifices, and filters
- NON CE-RATED Powered Drain Water Filter Tank4 that helps filter the excess garnet and other debris from the tank water.
- Water Spray Kit, which helps keep the cutting area interior clean and is handy for cleaning freshly cut parts
- 6 Buckets of Garnet Abrasive, 55Lb Bucket
1 n/a Power requirements:
Step-Up Transformer
3. Place of Performance NASA Kennedy Space Center (KSC) Fl 32899
4. Period of Performance
30 days ARO
File details come from the government source that posted it. Updated .