SATPC0042387 Tab 04 4 SOW .pdf
PDF 132 KB Posted
- Attached to
- Fabricating these high-precision Titanium Ti-6Al-4V parts for the SWME hardware project.
- Solicitation number
- 80NSSC26941556Q
About this file
Statement of Work Summary
This Statement of Work issued by NASA Johnson Space Center's Crew and Thermal Systems Division details the procurement of fabricated End Caps for the Suit Water Membrane Evaporator (SWME) hardware supporting the xEVAS program. The contractor must fabricate three part types in specified quantities: 66 units of End Cap, Outer Cartridge (SDN13102191-002), 33 units of End Cap, Inner, Primary Cartridge (SDN13102190-003), and 33 units of End Cap, Inner, Secondary Cartridge (SDN13102190-004). All parts are high-precision, tight-tolerance machined aerospace components manufactured from Titanium Ti-6Al-4V and must maintain compatibility with existing SWME parts previously manufactured by HARBEC, Inc.
The contractor shall perform fit checks between inner and outer cartridge end cap pairs prior to shipment, ensure proper packaging to preserve dimensional integrity and prevent contamination, corrosion, and physical damage, and comply with detailed requirements specified in the referenced document "PR4200941556 SWME End Covers (HARBECS) JF2422.doc." Performance of work shall take place at HARBEC, Inc. in Ontario, New York, with a required lead time of 10 weeks after receipt of order.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0042387 Tab 07 Capability Statement.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements
The NASA Johnson Space Center, Crew and Thermal Systems Division, Space Suit and Crew Survival Systems Branch is requesting to procure fabricated End Caps to support the Suit Water Membrane Evaporator (SWME) hardware for xEVAS.
It is critical that the SWME End Caps maintain compatibility with existing SWME parts. Existing parts have been previously manufactured by HARBEC, Inc. which already holds the unique knowledge and expertise in fabricating these high-precision
Titanium Ti-6Al-4V parts for the SWME hardware project.
The parts are described below:
Part Name Part Number Quantity Serial Numbers
Assigned
End Cap, Outer
Cartridge
SDN13102191-002 66
End Cap, Inner, Primary Cartridge
SDN13102190-003 33
End Cap, Inner, Secondary
Cartridge
SDN13102190-004 33
2. Characteristics, Scope, and Specs
The contractor shall perform the following duties:
• Provide high-precision, tight-tolerance, machined aerospace parts described above.
• Fit checks shall be conducted between part number SDN13102190 (end cap, inner, cartridge) and SDN13102191(end cap, outer) pairs prior to shipment.
• Vendor shall be responsible for ensuring that the parts are packaged such that dimensional integrity is preserved (specifically with threaded mating surfaces), contamination and corrosion are prevented, and no physical damage occurs.
• Vendor shall meet the requirements detailed in “PR4200941556 SWME End Covers
(HARBECS) JF2422.doc”
3. Place of Performance
HARBEC, Inc. in Ontario, NY.
4. Schedule
Lead time for delivery shall be 10 weeks after receipt of order.
File details come from the government source that posted it. Updated .