SATPC0042134 Tab 04 4 SOW.pdf

STATEMENT OF WORK

1. Objective/Requirements

The information listed below is required to complete this purchase.

2. Characteristics, Scope, and Specs

LINE PART # DESCRIPTION QTY.

1.0 Software or Technical Support Plan

1.1 MESFTSE

Software Support Plan (SSP) Year 1

Software Support Plan 793 Software with MPT

1.2

100718920

MTS Computer; Windows 11, 64 bit, 32GB RAM, 2x512GB hard drive, Desktop

The MTS system PC is an integral part of the real-time test control system and is extensively configured and tested inside the MTS factory to assure seamless integration with test system hardware and software. The PC hosts the control software and associated applications, and is optimized to provide a fast, stable, real-time interface to the digital control system. The hardware and software components on these PCs are curated by the same engineering groups that designed the controller, leveraging MTS’s unique application expertise. MTS recommends these computers be used solely for test system-related activities, to maximize available processing power and ensure long-term software stability for years of reliable operation.

• Computer specifications subject to change

• Includes Microsoft Office

• MTS-Supplied computers comply with the following certifications:

• Argentina IRAM & UL, Australia C-tick, Canada UL

• China CCC, EU CE & WEEE, Japan VCCI

• Korea KCC, Singapore Safety, Taiwan BSMI Safety, United States FCC &

UL

1.3 CARD-ETHERNET,NETXTREME,GBIT,+,PCI-E,LP 4

1.4 Onsite Install & Commissioning

FSE Hourly Rate; Standard

1.5 FSE Travel Expense 1

MTS ReNew System

1.1 100178163 MTS ReNew Controller; Insight Mongoose Replacement

MTS ReNew Upgrade extends the life and productivity of your existing universal test system through software and electronics updates.

MTS refurbishes your existing system with state-of-the-art digital controls and a computer running best-inclass software.

• Hardware: MTS Controller

• Standard data channels: Load, Time, Strain

• Optional analog output: Yes, 2 available

• Up to 1000 Hz DAQ rate

• Self-ID capability for calibration and auto-ranging

• • Must be mechanically sound

1.2 100360804 Install Kit; Alliance Pre-Amp Bypass

This modification kit eliminates the crosshead-mounted preamp on Alliance frames, while retaining the standard limit switch operation.

• Kit includes a new load cable and allows the following:

o Use of D25-style TEDS adapters for load cell “Self-Identification.”

o Improved calibration accuracy.

o • Allows the controller to interlock at 110% of load cell capacity, improving machine safety.

1.3 100194691 Handset with cable; Model 494.05

Remote handset with system jog and operator controls

1.4 100693951 MTS Computer; Windows 11, 64 bit, 32GB RAM, 2x512GB hard drive, Desktop

The MTS system PC is an integral part of the real-time test control system and is extensively configured and tested inside the MTS factory to assure seamless integration with test system hardware and software. The PC hosts the control software and associated applications, and is optimized to provide a fast, stable, real-time interface to the digital control system. The hardware and software components on these PCs are curated by the same engineering groups that designed the controller, leveraging MTS’s unique application expertise. MTS recommends these computers be used solely for test system-related activities, to maximize available processing power and ensure long-term software stability for years of reliable operation.

• Computer specifications subject to change

• Includes Microsoft Office

• MTS-Supplied computers comply with the following certifications:

• Argentina IRAM & UL, Australia C-tick, Canada UL

• China CCC, EU CE & WEEE, Japan VCCI

• • Korea KCC, Singapore Safety, Taiwan BSMI Safety, United States FCC &

UL

1.5 100330545 MTS Supplied Monitor - 27 inch, LCD 1

1.6 100243332 MTS TestSuite™ TW Elite Software – EM

MTS TestSuite™ TW Elite Software provides the ability to design, run, analyze and report on monotonic and cyclic tests. The easy-to-use interface and powerful test creation capabilities reduce test creation time and streamline test execution.

• Includes pre-defined templates for tension, compression, bend and peel testing

• Graphical drag-and-drop test flow design

• Test template creation

• Data acquisition (timed, P/V, level crossing, cyclic/logarithmic)

• Sine, square, triangle, ramp, hold and custom waveform activities

• Parallel branches for test execution and logical operators (if/then, while)

• Advanced Rate Control is Included

• Limit sensing, sequencing triggers and interface to digital I/O

• Data export to ASCII

• Report generation during test and post test

• PC Configuration: Windows 10 Professional or Enterprise recommended, 3.2

GHz processor or faster (overclocked or turbo boost specs acceptable) Intel Core i5 or AMD Ryzen 5 minimum, 16 GB RAM recommended or 8GB RAM minimum, 20GB Hard Drive free space available, DVD ROM-Drive, (2)

• Ethernet Network Cards, 1280x1024 screen resolution minimum.

• PC not included in this line item

• Recommended Software: MTS TestSuite Reporter for creating and editing report templates, Microsoft

• Excel 2016 or newer to view reports.

1.7 100243336 MTS TestSuite™ TW Strain 1 & 2 Option

• Provides the ability to collect data from two hardware channels for extensometers, load cells or highlevel signals

• Required Software (not included in this line item): MTS TestSuite TW Elite, TW Essential or TW Express for test execution

1.8 Software Support Plan (SSP) Year 1

MTS Software Support Plan is a simple, cost-effective way to keep your organization’s vital test systems running smoothly. The Software Support Plan provides a variety of benefits for MTS software customers including:

• Priority Tier 1 and Tier 2 technical support

• Access to all new software releases via FNO Portal – new software functionality, bug fixes, and compatibility with new Operating Systems

• If SSP includes RPC/cRPC and/or AeroPro: Tuition-free training for 1 seat in up to 2 courses per 12-month increment of contract period is included as an entitlement

• If SSP includes MTS TestSuite™: Access to online training videos on the myMTS Portal is included as an entitlement

• Software Support Plan MTS TestSuite™ TW Elite - EM

1.9 Onsite Calibration

• Axial Force Calibration, S/H, 0-100 kN (0-22 kip), MTS Method

• Speed and Displacement Calibration, EM Frames, ASTM Accredited

1.10 Onsite Install & Commissioning

• Onsite installation of MTS ReNew controller upgrade o A trained and equipped MTS Field Service Engineer will visit your facility to perform the ReNew installation. The tasks performed during this visit may include installation, calibration, or preventive maintenance as purchased in the quote.

o Installation by MTS Field Service Engineer

1.11 Onsite Basic Operation Training

• Onsite Basic Operator Training for ReNew

1.12 FSE Travel Expense 1

MTS ReNew System

1.1 100178163 MTS ReNew Controller; Insight Mongoose Replacement

MTS ReNew Upgrade extends the life and productivity of your existing universal test system through software and electronics updates.

MTS refurbishes your existing system with state-of-the-art digital controls and a computer running best-inclass software.

• Hardware: MTS Controller

• Standard data channels: Load, Time, Strain

• Optional analog output: Yes, 2 available

• Up to 1000 Hz DAQ rate

• Self-ID capability for calibration and auto-ranging

• Must be mechanically sound

1.2 100360804 Install Kit; Alliance Pre-Amp Bypass

This modification kit eliminates the crosshead-mounted preamp on Alliance frames, while retaining the standard limit switch operation.

• Kit includes a new load cable and allows the following:

o Use of D25-style TEDS adapters for load cell “Self-Identification.”

o Improved calibration accuracy.

• Allows the controller to interlock at 110% of load cell capacity, improving machine safety.

1.3 100194691 Handset with cable; Model 494.05

Remote handset with system jog and operator controls

1.4 100693951 MTS Computer; Windows 11, 64 bit, 32GB RAM, 2x512GB hard drive, Desktop

The MTS system PC is an integral part of the real-time test control system and is extensively configured and tested inside the MTS factory to assure seamless integration with test system hardware and software. The PC hosts the control software and associated applications, and is optimized to provide a fast, stable, real-time interface to the digital control system. The hardware and software components on these PCs are curated by the same engineering groups that designed the controller, leveraging MTS’s unique application expertise. MTS recommends these computers be used solely for test system-related activities, to maximize available processing power and ensure long-term software stability for years of reliable operation.

• Computer specifications subject to change

• Includes Microsoft Office

• MTS-Supplied computers comply with the following certifications:

• Argentina IRAM & UL, Australia C-tick, Canada UL

• China CCC, EU CE & WEEE, Japan VCCI

• Korea KCC, Singapore Safety, Taiwan BSMI Safety, United States FCC & UL

1.5 100330545 MTS Supplied Monitor - 27 inch, LCD 1

1.6 100243332 MTS TestSuite™ TW Elite Software – EM

MTS TestSuite™ TW Elite Software provides the ability to design, run, analyze and report on monotonic and cyclic tests. The easy-to-use interface and powerful test creation capabilities reduce test creation time and streamline test execution.

• Includes pre-defined templates for tension, compression, bend and peel testing

• Graphical drag-and-drop test flow design

• Test template creation

• Data acquisition (timed, P/V, level crossing, cyclic/logarithmic)

• Sine, square, triangle, ramp, hold and custom waveform activities

• Parallel branches for test execution and logical operators (if/then, while)

• Advanced Rate Control is Included

• Limit sensing, sequencing triggers and interface to digital I/O

• Data export to ASCII

• Report generation during test and post test

• PC Configuration: Windows 10 Professional or Enterprise recommended, 3.2

GHz processor or faster (overclocked or turbo boost specs acceptable) Intel Core i5 or AMD Ryzen 5 minimum, 16 GB RAM recommended or 8GB RAM minimum, 20GB Hard Drive free space available, DVD ROM-Drive, (2)

• Ethernet Network Cards, 1280x1024 screen resolution minimum.

• PC not included in this line item

• Recommended Software: MTS TestSuite Reporter for creating and editing report templates, Microsoft Excel 2016 or newer to view reports.

1.7 100243336 MTS TestSuite™ TW Strain 1 & 2 Option

• Provides the ability to collect data from two hardware channels for extensometers, load cells or highlevel signals

Required Software (not included in this line item): MTS TestSuite TW Elite, TW Essential or TW Express for test execution

1.8 Software Support Plan (SSP) Year 1

MTS Software Support Plan is a simple, cost-effective way to keep your organization’s vital test systems running smoothly. The Software Support Plan provides a variety of benefits for MTS software customers including:

• Priority Tier 1 and Tier 2 technical support

• Access to all new software releases via FNO Portal – new software functionality, bug fixes, and compatibility with new Operating Systems

• If SSP includes RPC/cRPC and/or AeroPro: Tuition-free training for 1 seat in up to 2 courses per 12-month increment of contract period is included as an entitlement

• If SSP includes MTS TestSuite™: Access to online training videos on the myMTS Portal is included as an entitlement

Software Support Plan MTS TestSuite™ TW Elite - EM

1.9 Onsite Calibration

• Axial Force Calibration, S/H, 0-100 kN (0-22 kip), MTS Method

Speed and Displacement Calibration, EM Frames, ASTM Accredited

1.10 Onsite Install & Commissioning

• Onsite installation of MTS ReNew controller upgrade o A trained and equipped MTS Field Service Engineer will visit your facility to perform the ReNew installation. The tasks performed during this visit may include installation, calibration, or preventive maintenance as purchased in the quote.

Installation by MTS Field Service Engineer

1.11 Onsite Basic Operation Training

Onsite Basic Operator Training for ReNew

1.12 FSE Travel Expense 1

The vendor shall:

• Update (4) computers to use WIN11 OS with MTS 793 software

• Computers additional ethernet cards

• Include installation

3. Place of Performance

Langley Research Center (LaRC)

4. Period of Performance

90 days ARO