STATEMENT OF WORK

1. Objective/Requirements

The NASA Johnson Space Center (JSC) requires the procurement of a Rigaku

Supermini 200 Benchtop Spectrometer.

2. Characteristics, Scope, and Specs

LINE PART

NO.

DESCRIPTION QTY.

1 A00012256

Supermini200 High Powered Benchtop Wavelength-

Dispersive X-ray Fluorescence Spectrometer

The Supermini200 is the world’s first high powered benchtop wavelength-dispersive (WD) XRF spectrometer available. The Supermini200 provides superior sensitivity and spectral resolution resulting in low levels of detection with excellent precision and accuracy for elemental analysis from Fluorine to Uranium on the Periodic Table of Elements. Simple operation and low cost of ownership provided in a compact benchtop cabinet.

• Benchtop Cabinet, 580(W)× 640mm(D)×

630mm(H), 98kg

• High Frequency X-ray Generator

• High Precision Goniometer with Temperature

Stabilizer

• Flow-Proportional Counter (F-PC) Detector

• Scintillation Counter (SC) Detector

• Helium Gas Flush Attachment

• Windows Based Applications Software

Including:

Subkit for Supermini200 (SUPERMINI200-SUBKIT)

• P-10 Gas Regulator (8-350)

• X-ray Warning Signs (INS-XRAY-SIGNS)

• Radiation Safety Handbook (HANDBOOK, NBS

111)

• Periodic Table of Elements (PERIODIC TABLE)

• Sample Setting Jig

Helium Gas Regulator (8L-580)

Included with A00012256 - 200 Watt End Window X-ray

Tube, Pd Target

200 Watt End Window X-ray Tube, Pd Target

The Supermini200 has been designed with optimal performance using an air-cooled 200W end window x-ray tube with a Pd target. The 200W x-ray tube results in super sensitivity while remaining a benchtop XRF instrument. The tube is positioned below the sample allowing the analysis of solid, liquid, and loose powders

(liquid and loose powder samples require helium purge option). No cooling water required.

• 50kV, 4.0mA = 200W Power

• Pd Target

Note: 3 Year warranty needed on X-ray Tube

Included with SUPERMINI200:

12-Position Automatic Sample Changer

The Supermini200 includes an easy to use bidirectional

12-position automatic sample changer to allow loading of up to 12 samples for unattended measurement. Samples may be added or removed while a sample is in the process of being analyzed. This built-in sample changer provides automation, convenience, and increased sample throughput with minimal user intervention.

Sample Spin Capability

• Sample spinning (30 revolutions per minute) is provided to improve sampling statistics when required.

• Multipurpose Sample Holder with 30mm Mask

• (3009B013), Qty 12

• Sample holder to hold any sample type

• Holes in sample holder body allow for better dispersion when used in helium atmosphere

• 30mm measuring area on sample surface

• Maximum sample size = 44mm outer diameter x

33mm thick

• Includes Center Rings for Sample Cells

845317G Center Ring for Solid Sample 20mmH, Qty 12

1030232 Sample Prep Kit for Supermini200 - (To be used for liquids, powders and oils)

Zr Automatic Primary Beam Filter

A single Zr automatic primary beam filter is included to remove the Pd-K spectral lines resulting from the Pd target x-ray tube enabling the analysis of Cd, Ru, Rh, Pd, Ag, In.

3 Crystal Exchanger

Includes:

LiF(200) crystal for the analysis of Ti-U

PET Crystal for the analysis of Al-Ti

RX-26 Multilayer Crystal O - Mg

PC-XRF

Computer Configuration for X-Ray Fluorescence

PC Computer for instrument control and data processing.

Specifications

• Intel CoreTM i7 Processor

• 32.0 GB RAM

• Dual-band 802.11ac Wi-Fi with Bluetooth 5

• Internal Audio Speaker

• 27” Screen

• Dual Monitor Capability

• 512 GB Hard Drive, SSD

• 8X DVD+/-RW, 9.5 Optical Disk Drive

• 4 USB ports, 2 on the front, 2 on back

• 6 USB3 ports 2 on the front, 4 on the back

• Keyboard, USB 2 Button Scroll Mouse and Pad

• Microsoft Windows 11 PRO, 64 bit

• MS Office 2021 Home and Business

• Adobe Acrobat Reader

• Two (2) Ethernet Ports required

• 3 yr Basic Limited Warranty, 3 yr NBD On-Site

Service from Dell

Notes: Above configuration to be provided. Customer to ensure networking capabilities provided to facilitate installation. Includes software integration and testing

ZSX Control, Measurement & Analysis Software

• EZ Analysis with simplified interface for easy measurement.

• EZ Scan where the number of input items are minimized for fast and easy for qualitative and semi-quantitative analysis with SQX software.

• Empirical regression analysis (5 matrix correction models)

• Fundamental Parameters (FP) Analysis

(Bulk/Thin Film)

• Programmable "Batch Runs"

• Thin Film Software for FP for up to 10 Layers

• Automated PHA adjustment

• Complete off-line qualitative & quantitative programs

• Data transmitting program

• Password control to protect sensitive information

A00009923 Programmable Operation Software

Preset time and intervals for analysis.

301AB009 SQX Software for Semi-Quant Analysis

SQX is the most powerful standard less, semi-quantitative analysis software program available. Accurate results are obtained by Fundamental Parameters (FP) and an internal

Common Library for the full range of measureable elements without the use of standards.

• Fundamental Parameters (FP)

• No standards required

• Scan and fixed angle analysis methods

• Common Library of sensitivity factors

3016B010 Includes:

• Drift Correction Samples (1 set): DCS-G1

• SQX Matching Library

• Improves accuracy for semi-quantitative analysis by matching the unknown sample with standard(s) from a user established Matching Library.

• Matching Library automatically searches for the best matched standard and applies matrix corrections for higher accuracy SQX results.

301AB013 SQX Scatter FP Software

A new Fundamental Parameter method that uses Compton and Thomson scattered tube spectral line intensities for the accurate determination of the total composition of unmeasured light elements as a whole. This contributes greatly to increased accuracy of semi-quantitative analysis compared to simple balance methods.

3016B013 Fusion Disk Correction Software

Theoretical matrix correction containing LOI & Flux

Evaporation Corrections saving the operator from tedious and repetitive calculations while increasing the accuracy of analysis preformed on fused disk samples.

3016B012 Theoretical Line Overlap Correction

• Performed in quantitative analysis by use of

• theoretical intensities

903773XFWEB Remote Training

Face-to-face live internet applications training using several web-based tools such as Zoom, TeamViewer, and web cameras to facilitate an experience similar to actual onsite training. The remote trainings can often be scheduled soon after installation has been successfully completed. Training will be conducted by a Rigaku

Applications Scientist(s). Training will cover the following: ZSX software, sample prep, and general instrument maintenance (specific to daily operations).

Customer’s trainings will be done in the comfort of their own laboratory environment .Advanced training will cover specific customer’s applications and system configuration which may include mapping, extra crystals, etc.

• Two (2) days for up to three people

• Scheduling can be done soon after successful installation

• A web-based WiFi camera will be provided with all Remote Trainings

• Remote training must be completed within 6 months of system installation

903773SCHOOL XRF School

XRF School is conducted over 3 days covering XRF theory, ZSX software, sample prep methods, and general

XRF instrument operation. The training utilizes various

XRF instrumentation and sample preparation equipment to show a wide variety of XRF methods. Multiple Rigaku

XRF instructors will be participating for the duration of the course. Attendees will have the opportunity to address specific application needs and network/learn from students of other industries. Participants can attend remotely via computer/internet connection or in-person at our

Woodlands facility.

1029371 Eaton UPS 9SX3000

Single Phase Online Tower UPS 3000VA/2700W, 120V, 50/60Hz L5-30P inout line cord, 8ft (1)5-30R & (4)5-20R output receptacles internal batteries for 5.7 min @ full load Dims: 13.6""H x 8.4""W x 16.2""D each Weight:

77.2 lbs each

2 SERVICE

CONTRACT

Supermini 200 Service Contract with On-site Repair

One-year standard coverage service contract for Supermini

200 (Service contract does not cover peripheral equipment such as x-ray Tubes, sample holders, computer, etc.)

Service contract includes:

• 72 hour best effort on site service response

• All on-site labor and repair travel and living expenses for one (1) Preventive Maintenance service visit per contract period.

• Onsite Emergency repair service as deemed necessary by a qualified Rigaku Service

Representative.

• Technical Telephone Support During Business

Hours, 8am to 5pm Monday through Friday CST

• Standard System Parts (no consumables) and

Shipping included. Parts to be shipped FOB destination, to nearest airport via economy international shipping (one way).

• Return of defective part required in some cases.

Defective parts to be shipped FOB destination, to

Seller's loading dock via economy international shipping (or 3 day domestic shipping).

Notes: Service contract commences upon the expiration of the one-year warranty. Complete service contract coverage details available upon request.

The purchase shall provide the following:

• Purchase and installation of a benchtop wavelength-dispersive X-ray fluorescence spectrometer (WD-XRF) with the following capabilities o Vacuum Pump o Helium Gas Regulator o 200 Watt End Window X-ray Tube, Pd Target o 12-Position Automatic Sample Changer with sample spin capability o Multipurpose Sample Holder with 30mm Mask o Center Ring for Solid Sample 20mmH o Zr Automatic Primary Beam Filter o 3 Crystal Exchanger including

▪ LiF(200) crystal for the analysis of Ti-U

▪ PET Crystal for the analysis of Al-Ti

▪ RX-26 Multilayer Crystal O - Mg o PC Computer for instrument control and data processing with the following software packages

▪ Measurement and analysis

▪ Programmable operation

▪ Semi-quant analysis

▪ Matching library

▪ Scatter fundamental parameters

▪ Fusion disk correction

▪ Theoretical line overlap correction o Remote training o In-person 3-day training o Single phase online tower UPS

▪ 3000VA/2700W, 120V, 50/60Hz o Work will be performed from August 2026 – September 2026

3. Place of Performance

NASA Johnson Space Center

ATTN: Jeff Berger, X13 JETSII

2101 NASA Parkway

Houston, TX 77058

4. Period of Performance

3-4 months ARO.