SATPC0041681 Tab 04 SOW.pdf
PDF 201 KB Posted
- Solicitation number
- 80NSSC26937756Q
About this file
This is a Specification Sheet/Statement of Work for the procurement of specialized GPS/positioning equipment for NASA's Airborne LASER Communication and QUARC project. The requirement specifies two identical units of a CPT7 dual antenna enclosure (part number SPANCPT7-GDD-RYN-TBN-P2) containing an OEM7720 receiver with Honeywell HG4930 MEMS IMU, along with two active L1/L2 GPS/Glonass/L-Band antennas (part number G5Ant-3AT1). The equipment must support GPS+QZSS, L1/L2, SBAS L1 with L-Band capabilities, dual antenna activation, RTK+PPP+Single Point+DGPS positioning, ALIGN relative positioning, 20 Hz data output rate with 400 Hz raw IMU data rate, base station corrections, and SPAN-enabled relative INS with profiles including heave measurement. One unit set is designated for aircraft installation and the second for the experimenters team.
Delivery is required to NASA Armstrong Flight Research Center, Building 4800:2134, Lilly Drive, Edwards, CA 93524, no later than July 31, 2026. No alternate products are approved; the specific part numbers and NSN are mandatory. NASA Quality Document Q1-A compliance is required, including FAA 8130 certification, manufacturer's Certificate of Conformance, or OEM trace documentation with Q-2 test reports. Warranty follows OEM terms, and no broker import requirements apply. Freight shipments require coordination at least 4 business days in advance to ensure proper entry procedures into Edwards Air Force Base and may require an AFRC visitor request submission.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0041681 Tab 07 Capability Statement.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPEC SHEET/ STATEMENT OF WORK
1. Objective/Requirements PN SPANCPT7-GDD-RYN-TBN-P2 (IMU) is for Project “Airborne LASER Communication and QUARC”. Purchase requires specific part number and NSN. No alternates approved.
NASA Quality Document Q1-A compliance required (I.E. FAA 8130, manufactures Certificate of Conformance or OEM trace.) Q-2 Test reports, etc.
2. Characteristics, Scope, and Specs Product part number: SPANCPT7-GDD-RYN-TBN-P2 Nomenclature: CPT7 dual antenna enclosure containing OEM7720 with Honeywell
HG4930 MEMS IMU
Quantity needed : 2 Additional Specs:
CPT7 dual antenna enclosure containing OEM7720 with Honeywell HG4930 MEMS IMU. GPS+QZSS, L1/L2, SBAS L1, with LBand, Dual Antenna Activation, RTK +PPP+Single Point+DGPS PNT, ALIGN Relative Positioning, 20 Hz Data Output Rate, Base Station Corrections + Measurements, SPAN enabled with Relative INS + Profiles (includes Heave), 400 Hz raw IMU data rate Includes GLIDE & RAIM.
Product part number: G5Ant-3AT1 Nomenclature: Active L1/L2 GPS/Glonass/L-Band Antenna Quantity needed : 2 Additional Specs:
3.5" Diameter, Active L1/L2 GPS/Glonass/L-Band Antenna, TNC Connector, White Color Note: Quantity 2 is being requested 1 unit set is for aircraft install as capability and 2nd unit set is for the experimenters team.
3. Place of Performance or Delivery Location NASA Armstrong Flight Research Center Bldg 4800:2134 Lilly Drive Edwards, CA 93524
4. Period of Performance or delivery date/need by date required Needed not later than 31/07/2026
Warranty requirements?
As applicable from OEM Broker import requirements, if applicable.
none Freight Delivery requirements, if applicable. – *If FREIGHT shipment is required, it needs to be coordinated 4 business days in advance to ensure the delivery driver has proper entry into Edwards Air Force Base. An AFRC visitor request may need to be submitted.
File details come from the government source that posted it. Updated .