SATPC0040407 Tab 04 4 SOW.pdf
PDF 75 KB Posted
- Attached to
- Xact Metal XM200G 3D Printer or Equivalent Federal contract opportunity
- Solicitation number
- 80NSSC26925331Q
About this file
This is a Statement of Work for the purchase of a metal 3D printer system for NASA Kennedy Space Center. The procurement requires delivery and installation of one Xact Metal XM200G 3D Printer or equivalent, with installation required by July 30, 2026. The printer must have a build capacity of 150 mm x 150 mm x 150 mm and safely operate with both reactive and non-reactive metal powders, and must include a glove box for powder cleaning to minimize personal protective equipment use.
The complete system includes the XM200G Metal 3D Printer (200-Watt, 50 micron resolution with dual glove box), a 3D Metal Printing Starter Kit, cyclone separator accessory, Single Optic Industrial Package software license with one-year Magics Print subscription, installation and training services, domestic/international shipping preparation, ten replacement recoater bulb sets, four HEPA filters for large housing, and twenty units of stainless steel 316L powder. The procurement specifies US-based technical support due to NASA's need for vendor communication regarding this new technology. Delivery is to NASA Kennedy Space Center, BOSS Receiving at M6-0744, Kennedy Space Center, FL 32899.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0040407 Tab 10 RFQ Open Market.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements
NASA Kennedy Space Center requires the purchase of one (1) Xact Metal XM200G 3D
Printer or Equivalent. The specifications are provided below.
2. Characteristics, Scope, and Specs
• Printer must have the ability to print parts up to 150 mm x 150 mm x 150 mm cube.
• Printer must safely use reactive and non-reactive metal powders.
• Must include glove box for cleaning powder from parts prior to opening. Minimizes
PPE use.
• US based technical support required– new to this technology so will likely require communication with vendor.
Xact Metal XM200G 3D Printer or Equivalent
Part # Description Qty
XM200G-2112141
XM200G Metal 3D Printer, 200-Watt, 50 micron, Standard Galvanometer, Reactive, Dual Glove Box, Extended Feed, Extended Build,120 volt US
HTS:8485.10.0100 or Equivalent
ACC015
3D Metal Printing Starter Kit XM200G 150 mm Build Area
HTS:8485.80.0000 or Equivalent
ACC014
Accessory - Cyclone Separator
HTS:8508.70.0000 or Equivalent
SW030
Single Optic Industrial Package (1 Yr License);
Magics Print for Xact Metal with Auto-Scaffold or Equivalent
TR001 Installation & Training 1
ACC019 Domestic/International Shipping Prep XM200G 1
SP016
XM200G Replacement Recoater Bulb Set
HTS:8485.80.0000 or Equivalent
SV106
HEPA Filter for Large Housing
HTS:8421.39.0115 or Equivalent
P316L Powder - Stainless Steel - 316L (316, -45/+15um)
HTS:7205210000 or Equivalent
3. Place of Performance
NASA Kennedy Space Center
BOSS Receiving - M6-0744
Kennedy Space Center, FL 32899
4. Period of Performance
Installation required by no later than 07/30/2026.
File details come from the government source that posted it. Updated .