SATPC0039746 Tab 04 SOW.pdf
PDF 103 KB Posted
- Attached to
- Swagelok M200 Orbital Welding System Federal contract opportunity
- Solicitation number
- 80NSSC26914206Q
About this file
This document contains specifications for an Orbital Welding System sought by NASA Glenn Research Center (GRC). The Smart Sensing and Electronics System branch requires a specialized welding system for facilitizing semiconductor equipment, specifically for welding Swagelok fittings and lines. The required system must be designed for orbital tungsten gas arc welding, compatible with 1/8 to 1/2 inch and 3 to 12mm welds, and include a power supply, weld head, fixture kit, and work support with appropriately sized electrode tips.
Key technical requirements include an integrated mass flow controller for OD shield gas flow, capability to monitor and record weld output performance, automatic weld procedure generation with multiple material options, and a portable tabletop design. Additional specifications mandate the system be new, run on 115 VAC 60Hz single-phase power, come with a factory warranty, and be supplied by an authorized dealer or original equipment manufacturer (OEM). The welding system is intended for aerospace applications, specifically supporting NASA GRC's work on silicon carbide integrated circuits and sensors.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0039746 Tab 12 RFQ Open Market - SB Dissolved.pdf | ||
| SATPC0039746 Tab 12 RFQ Open Market Template 12-5-2025.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications for an Orbital Welding System
The Smart Sensing and Electronics System branch at NASA Glenn Research Center (GRC) at Lewis Field focuses on developing silicon carbide (SiC) integrated circuits (ICs) and sensors for aerospace applications. NASA GRC is in need of an Orbital Welding system well-suited to weld Swagelok fittings and lines needed to facilitize semiconductor equipment.
The welder should meet the following capabilities/specifications:
1. Must be designed for orbital tungsten gas arc welding of Swagelok fittings and lines
2. Compatible with 1/8 to 1/2in. and 3 to 12mm welds
3. Must consist of power supply, weld head, fixture kit, work support and appropriately sized electrode tips
4. Power supply must have an integrated mass flow controller to automatically control OD shield gas flow
5. Must have capability to monitor and record weld output performance
6. Must have automatic weld procedure generation capability with multiple material options
7. Must be a portable tabletop system
8. Runs on 115 VAC 60Hz Single Phase
9. Must be NEW with factory warranty
10. Seller must be authorized dealer or OEM
File details come from the government source that posted it. Updated .