SATPC0037976 Tab 04 4 SOW.pdf
PDF 130 KB Posted
- Attached to
- OMEGA160-NET F/T Transducers US-600-3600 with network box and required cables/adapters (3 units each)
- Solicitation number
- 80NSSC25899411Q
About this file
This is an Updated Statement of Work/Specifications document for three high-strength, low-weight load cells with specific technical requirements. The required equipment includes OMEGA160 NET F/T Transducers (part number 9105-NETOMEGA2160) with US-600-3600 calibration, accompanying transducer cables, a network box with internal electronics, cable adapters, and power supplies. The transducers feature EDM wire-cut stainless steel construction with maximum overload values of 4.2 to 15.2 times rated capacities and silicon strain gauges providing a signal 75 times stronger than conventional foil gages.
The solicitation (80NSSC25899411Q) is issued by the National Aeronautics and Space Administration Shared Services Center and is set aside for small businesses. The technical specifications detail single-axis overload capacities, stiffness calculations, resonant frequencies, and physical specifications, with the transducers weighing 6 lbs and having specific sensing ranges and resolutions. The calibration ranges include measurements for forces (Fx, Fy, Fz) and torques (Tx, Ty, Tz) with precise resolution capabilities.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0037976 Tab 10 RFQ OM.pdf | ||
| SATPC0037976 Tab 10 BNJ_CO_Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Updated Statement of Work/Specifications Revised April 2, 2025
Required are three high strength low weight load cells with high signal-to-noise ratio with embedded silicon strain gauges with low noise distortion.
Quantity Part Number Description
3 9105-NET-
OMEGA2160
OMEGA160 NET F/T Transducer, Calibration US-600-3600
3 9105-CF-MTS-MS-10 NET F/T Transducer Cable, flexible, straight connector at transducer, 10m
3 9105-NETB Network box for large transducers with internal electronics
3 9105-C-ES-RJ45-0.2 NET F/T cable adapter, Ethernet M12 4-pin connector to RJ45, 0.2m
3 9105-NETPS-N Net F/T power supply 24VDC output, North American line cord
Features of the sensor includes: The 9105-NET-OMEGA21 must have the following technical specifications: Extremely High Strength with Low Weight: EDM wire-cut from high yield-strength stainless steel. Maximum allowable overload values are 4.2 to 15.2 times rated capacities, and High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75 times stronger than conventional foil gages. This signal is amplified, resulting in near-zero noise distortion.
Single-Axis Overload
Fxy ±3900 lbf
Fz ±11000 lbf
Txy ±15000 lbf-in
Tz ±17000 lbf-in
Stiffness (Calculated)
X-axis & Y-axis forces (Kx, Ky) 4.0x105 lb/in
Z-axis force (Kz) 6.8x105 lb/in
X-axis & Y-axis torque (Ktx, Kty) 2.9x106 lbf-in/rad
Z-axis torque (Ktz) 4.6x106 lbf-in/rad
Resonant Frequency
Fx, Fy, Tz 1300 Hz
Fz, Tx, Ty 1000 Hz
Physical Specifications
Weight* 6 lb
And the following calibration:
Sensing Ranges Resolution Calibration Fx, Fy Fz Tx, Ty Tz Fx, Fy Fz Tx, Ty Tz US-600-3600 600 lbf 1500 lbf 3600 lbf-in 3600lbf-in 0.25 lbf 0.5 lbf 1 lbf-in 1 lbf-in
File details come from the government source that posted it. Updated .