SATPC0033117 Tab 04 4 SOW..pdf

PDF 123 KB Posted

Attached to
Machine Tensile and Creep Specimens Federal contract opportunity
Solicitation number
Not on record
Issued by
National Aeronautics and Space Administration Shared Services Center

About this file

Written by GovTribe AI ·

This statement of work requests the machining of 144 nickel-based superalloy creep test specimens from rectangular blanks supplied by the contractor. The contractor will machine the specimens to the dimensions specified in drawing creep_2.5in8rms and will maintain and transcribe identification markings from the blanks to the specimens. Groups of at least 12 specimens will be ordered at different times over the next two years. The contractor must include the per specimen cost and other charges such as shipping and processing in their quote. The soliciting agency is the National Aeronautics and Space Administration Shared Services Center. The point of contact for technical questions is christopher.a.kantzos@nasa.gov or tim.gabb@grc.nasa.gov.

View the file

Other files for this federal contract opportunity

Other files attached to Machine Tensile and Creep Specimens, newest first.
File Type Posted
SATPC0033117 Tab 07 Capability Statement SAM.gov.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Statement of Work for Machining 140 Creep Specimens 6/28/23

Machine a total of 144 specimens to creep_2.5in8rms, in groups of at least 12 specimens

Please machine nickel-based superalloy creep test specimens from each rectangular blank supplied as shown in Fig. 1. Use the dimensions of drawing creep_2.5in8rms, which has 1/4-28UNF grip threads.

Groups of at least 12 specimens will be ordered at different times over the next 2 years. Please maintain and transcribe from the blank to the specimen the indicated identifications and provided orientation markings on each specimen end.

When each group of specimens is prepared, these specimens would then be shipped to NASA.

Please include in the quote the cost per specimen. Please also include other charges that will be applied including shipping and processing in this quote.

For any technical issues, please contact:

mailto:christopher.a.kantzos@nasa.gov mailto:tim.gabb@grc.nasa.gov kjartis Highlight kjartis Highlight

Blank ID

Combined Blank ID1 + ID2

ID-A ID-B

ID-C ID-D

U

U U

U U

ID1

ID2

ID-A ID-B

ID-C ID-D

ID-A ID-B

ID-C ID-D

U

U

U

U

U

U

U

U

U

U

Blank ID

U

ID

Combined Blank = ID1-ID5

ID1

ID2

ID3

ID4

ID5

U

U

U

U

U

Figure 1. Layout for specimens using drawing creep_2.5in8rms in each type of rectangular superalloy blank. Specimens will be scribed on each end, and have the orientation markings such as “U” and “ID“ that will be provided on the end of each blank transcribed to the same specimen end.

File details come from the government source that posted it. Updated .