SATPC0033001 TAB 04 4 SOW.pdf
PDF 134 KB Posted
- Solicitation number
- 80NSSC23846065Q
About this file
This statement of work outlines requirements for an evaluation board and detector development package to be used in a navigation demonstration. The selected vendor must deliver a reconfigurable 4-6MP monochrome CMOS detector with less than 10ms timestamping accuracy via hardware technique. The interface should support c-mount optics, consume less than 10W of power, include non-volatile memory, and withstand radiation levels up to 25kRad(Si). Additional requirements include SpaceWire data/command interface, size of 100x80x70mm or less, and an operating temperature range of -40C to 70C. The period of performance is 22 weeks from contract award for use in a position, navigation, and timing demonstration by the National Aeronautics and Space Administration.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements To purchase an existing Evaluation Board and Detector Development Package that meets these minimum requirements, so it stays compatible with the existing autoNGC testbed developed at NASA – GSFC. This hardware will be used in a position, navigation, and timing demonstration that is based on the autoNGC performance requirements.
2. Characteristics, Scope, and Specs The vendor/contractor shall deliver the following Evaluation Board and Detector Development Package:
• Timestamping accuracy less than or equal to 10 milliseconds
• Provide timestamping capability via hardware (FPGA) technique
• Provide a reconfigurable detector performance via accessible system registers
• Detector size of 4MP to 6MP
• Provide a monochrome CMOS detector type
• Provide an interface for a c-mount optical modules
• Maximum power consumed less than 10 W
• Active consumed power less than 3 W at approximately 25C
• Provide non-volatile memory
• Cumulative Dose - Total Ionizing Dose minimum of 25 kRad(Si)
• Destructive SEE - SEL threshold LET > 60 MeV cm2/mg
• SpaceWire Data & Command Interface
• SpaceWire Electrical Interface
• Detector head mass less than 350 g w/o optical modules
• Detector head operating temperature range of -40C to 70C
• Maximum size of 100 mm x 80 mm x 70 mm in a test configuration
3. Place of Performance Vendor facility
4. Period of Performance 22 weeks after award of contract
File details come from the government source that posted it. Updated .