SATPC0032705 Tab 04 SOW_Redacted.pdf
PDF 83 KB Posted
- Attached to
- Taxiway asphalt and joint repair
- Solicitation number
- 80NSSC23845769Q
About this file
This document contains a request for quote for taxiway repair work and the related federal contract opportunity notice. The request for quote details the required work to mill and remove existing asphalt from two areas of a taxiway totaling approximately 50'x930' and 160'x180', clean and reseal approximately 6,000 linear feet of joints with hot pour sealant, apply tack coat and repave the taxiway totaling around 6,000 square yards with 2 inches of asphalt meeting FAA guidelines, and repaint markings with topsoil and reseeding as needed. Proposals must be submitted within 5 days of receipt. The related federal contract opportunity is solicited by the National Aeronautics and Space Administration Shared Services Center for taxiway asphalt and joint repair work as a special notice.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0032705 Tab 07 Capability Statement SAM.gov Posting.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
June 2,2023
Ref: 1244 Hanger Complex Repair and Repave Juliet Taxiway:
Please provide a quote to perform all necessary Labor, materials, and equipment to perform the following work.
1. Mill existing asphalt on Taxiway on 2 areas (approx. 50’x930’ and 160’x 180’) Remove all Asphalt to existing concreate surface and dispose of at a licensed disposal site.
2. Clean all joints by removing vegetation and blow out all loose debris with compressed air. Re-Seal all joints approximately 6000 lin.ft with CRAFCO Rubersaver 221 hot pour sealant.
3. Apply tack coat, repave taxiway totaling approximately 6,000 sq. yds with 2” of SM-9.5A as peer FAA guidelines.
4. Repaint linage on taxiway and backfill with topsoil and reseed as needed
Please submit proposal within 5 days of receival.
File details come from the government source that posted it. Updated .