SATPC0032510 Tab 04 4 SOW.pdf
PDF 147 KB Posted
- Attached to
- Parts for MIPS UMIC Hardware Federal contract opportunity
- Solicitation number
- 80NSSC23844712Q
About this file
This document outlines specifications for aluminum panels required for a federal contract opportunity with NASA. The contractor shall fabricate aluminum panels with the properties listed in Table 1, including panel quantities, lengths, widths and other items. General fabrication requirements in Table 2 specify the material as aluminum, anodized black surface finish, and 4.0mm +/- 10% finished thickness.
Solicitation number 80NSSC23844712Q from the National Aeronautics and Space Administration Shared Services Center seeks parts for MIPS UMIC hardware. The opportunity type is a special notice. Fabrication shall follow the panel specifications and requirements herein to fulfill this federal contract. Minor deviations from the requirements may be acceptable pending confirmation from the procurement team.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SATPC0032510 Tab 07 Capability Statement SAM.gov.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Required are the aluminum panels with properties listed in Table 1. General fabrication requirements are listed in Table 2. Other necessary fabrication information can be found in the PR package.
Minor requirement deviations may be acceptable. Please confirm any deviations with the procurement team.
Table 1: Listing of individual Panels
Panel Qty Length (mm)
Width (mm)
UmicRackInOut_3k 4 132.85 mm
483.00 mm
Transformer4UBack 4 177.30 mm
437.00 mm
UmicBack 12 132.85 mm
437.00 mm
Umic_top_piece_3U-2 1 132.85 mm
483.00 mm
Umic_top_piece_3U-3 1 132.85 mm
483.00 mm
Umic_top_piece_3U-4 1 132.85 mm
483.00 mm
Transformer4ULeft 4 601.6 mm
157.30 mm
Transformer4URight 4 601.6 mm
157.30 mm
Transformer4UTop 4 601.6 mm
417.00 mm
Transformer4UFront 4 176.95 mm
483.00 mm
Transformer4UBottom 4 601.6 mm
417.00 mm
UmicRight 12 601.6 mm
112.85 mm
UmicLeft 12 601.6 mm
112.85 mm
UmicTop 12 601.6 mm
417.00 mm
UmicFrontRev1 12 132.50 mm
483.00 mm
UmicBottom_w_drill_rev 12 601.6 mm
417.00 mm
GLGP2023 Housing Profile 2
32 601.6
GLGP2013 Housing Profile 1
32 601.6
GGMS1622 Assembly kit IGP/B6.0-SW DIN
16 N/A
GGMS1752 Assembly kit IGPS/B2.5-SW DIN
16 N/A
GGRB3308 Screw packet M3x8-965-SW
DIN 965
16 N/A
GGWS0112 Housing bracket
16 N/A
Table 2: General fab requirements
Specification Value Material Aluminum Surface Finish Anodized Black Finished Thickness 4.0 mm +/- 10%
File details come from the government source that posted it. Updated .