SATPC0032398 Tab 04 Specs.pdf

This document provides laboratory chiller specifications for a federal contract opportunity with the National Aeronautics and Space Administration Shared Services Center. The specifications require an air-cooled, closed-loop chiller compatible with polyalphaolefin fluid that can maintain a minimum outlet temperature of 20 degrees Celsius or lower and maximum outlet temperature of 60 degrees Celsius or higher, with a temperature stability of 0.5 degrees Celsius or lower. Additional requirements include a maximum heat rejection of 3.5 kW or higher, maximum heating power of 4 kW or higher, maximum pump flow rate of 10 gallons per minute or higher, maximum pump pressure of 80 pounds per square inch or higher, and weight of 500 pounds or lower. The chiller must operate on 208-volt power at 60 Hertz and produce a noise level of less than 85 decibels when measured one meter from the unit.