Sample_Contract_17134.pdf

Rev. 02.02.2025

State of Minnesota Contract

SWIFT Contract Number:

This Contract is between the State of Minnesota, acting through its Commissioner of Department of Natural Resources (“State”) and [Contractor] whose designated business address is [Contractor’s business address] (“Contractor”). State and Contractor may be referred to jointly as “Parties.”

Recitals

1. State issued a solicitation identified as SWIFT Event No. 2000017134 on May 7, 2025 for two fire suppression skid units to be deployed by Forestry for wildfires and for prescribed burns as needed (“Solicitation”);

2. Contractor provided a response to the Solicitation indicating its interest in and ability to provide the goods or services requested in the Solicitation; and

3. Subsequent to an evaluation in accordance with the terms of the Solicitation, the Parties desire to enter into a contract.

Accordingly, the Parties agree as follows:

Contract

Term of Contract

Effective date. May 16, 2025, or the date the State obtains all required signatures under Minn. Stat. § 16C.05, subd. 2, whichever is later. The Contractor must not begin work under this Contract until this Contract is fully executed and the Contractor has been notified by the State’s Authorized Representative to begin the work.

Expiration date. June 30, 2025, or until all obligations have been satisfactorily fulfilled, whichever occurs first.

Contractor’s Duties The Contractor shall perform all duties described in this Contract to the satisfaction of the State.

Representations and Warranties

Under Minn. Stat. §§ 15.061 and 16C.03, subd. 3, and other applicable law the State is empowered to engage such assistance as deemed necessary.

Contractor warrants that it is duly qualified and shall perform its obligations under this Contract in accordance with the commercially reasonable standards of care, skill, and diligence in Contractor’s industry, trade, or profession, and in accordance with the specifications set forth in this Contract, to the satisfaction of the State.

Contractor warrants that it possesses the legal authority to enter into this Contract and that it has taken all actions required by its procedures, by-laws, and applicable laws to exercise that authority, and to lawfully authorize its undersigned signatory to execute this Contract, or any part thereof, and to bind Contractor to its terms.

Time The Contractor must comply with all the time requirements described in this Contract. In the performance of this Contract, time is of the essence.

Compensation and Conditions of Payment

Compensation. The State will pay for performance by the Contractor under this Contract in accordance with the breakdown of costs as set forth in Exhibit D which is attached and incorporated into this Contract.

Conditions of Payment. All duties performed by the Contractor under this Contract must be performed to the State’s satisfaction and in accordance with all applicable federal, state, and local laws, ordinances, rules, and regulations including business registration requirements of the Office of the Secretary of State. The Contractor will not receive payment for work found by the State to be unsatisfactory or performed in violation of federal, state, or local law.

Authorized Representative

State’s Authorized Representative. The State's Authorized Representative is Valerie Fellows, State Program Administrator, Senior, 1201 E Hwy 2, Grand Rapids, MN 55744 218-328-8956, or his/her successor or delegate, and has the responsibility to monitor the Contractor’s performance and the authority to accept the services delivered or goods received under this Contract. If the services are satisfactory, the State's Authorized Representative will certify acceptance on each invoice submitted for payment.

Contractor’s Authorized Representative. The Contractor's Authorized Representative is [name, title] at the following business address and telephone number: [insert business address and telephone number], or his/her successor. If the Contractor’s Authorized Representative changes at any time during this Contract, the Contractor must immediately notify the State.

Exhibits The following Exhibits are attached and incorporated into this Contract. In the event of a conflict between the terms of this Contract and its Exhibits, or between Exhibits, the order of precedence is first the Contract, and then in the following order:

Exhibit A: Contract Terms Exhibit B: Insurance Requirements Exhibit C: Specifications, Duties, and Scope of Work Exhibit D: Price and Payment Schedule

1. State Encumbrance Verification Individual certifies that funds have been encumbered as required by Minn. Stat. §§ 16A.15 and 16C.05

3. State Agency With delegated authority

Print name: Print name:

Signature: Signature:

Title: Date: Title: Date:

SWIFT Contract No.:

2. Contractor The Contractor certifies that the appropriate person(s) have executed the Contract on behalf of the Contractor as required by applicable articles, bylaws, resolutions, or ordinances.

4. Commissioner of Administration As delegated by The Office of State Procurement

Print name: Print name:

Signature: Signature:

Title: Date: Title: Date:

Exhibit A: Contract Terms

Prompt Payment and Invoicing.

Prompt Payment. The State will pay the Contractor pursuant to Minn. Stat. § 16A.124, which requires payment within 30 days following receipt of an undisputed invoice, or merchandise or service, whichever is later. Terms requesting payment in less than 30 days will be changed to read “Net 30 days.” Notwithstanding the foregoing, the State may pay the Contractor in advance for purchases as allowed pursuant to Minn. Stat. §16A.065.

The payment for each order will only be made for goods received or services actually performed that have been accepted by the ordering entity, and meet all terms, conditions, and specifications of the Contract and the ordering document.

Invoicing. At a minimum the invoice must meet the requirements found on Exhibit D which provides a list of minimum invoice requirements.

Assignment, Amendments, Waiver, and Contract Complete.

Assignment. The Contractor may neither assign nor transfer any rights or obligations under this Contract without the prior consent of the State and a fully executed assignment agreement, executed and approved by the authorized parties or their successors.

Amendments. Any amendment to this Contract must be in writing and will not be effective until it has been executed and approved by the authorized parties or their successors.

Waiver. If the State fails to enforce any provision of this Contract, that failure does not waive the provision or its right to enforce it.

Contract Complete. This Contract contains all negotiations and agreements between the State and the Contractor. No other understanding regarding this Contract, whether written or oral, may be used to bind either party.

Termination.

Termination for Convenience. The State or Commissioner of Administration may cancel this Contract at any time, with or without cause, upon 30 days’ written notice to the Contractor. Upon termination for convenience, the Contractor will be entitled to payment, determined on a pro rata basis, for services or goods satisfactorily performed or delivered.

Termination for Breach. If the Contractor fails to perform according to the contract terms and conditions, the State is authorized to immediately cancel the Contract or purchase order, or any portion of it, and may obtain replacement goods or services and charge the difference of costs to the defaulting Contractor. In the event of default, the State reserves the right to pursue any other remedy available by law. A Contractor may be removed from the vendors list, suspended or debarred from receiving a Contract for failure to comply with terms and conditions of the Contract, or for failure to pay the State for the cost incurred on the defaulted Contract.

Termination for Insufficient Funding. The State may immediately terminate this Contract if it does not obtain funding from the Minnesota Legislature, or other funding source; or if funding cannot be continued at a level sufficient to allow for the payment of the services addressed within this Contract. Termination must be by written notice to the Contractor.

The State is not obligated to pay for any services that are provided after notice and effective date of termination.

However, the Contractor will be entitled to payment, determined on a pro rata basis, for services satisfactorily performed to the extent that dedicated funds are available. The State will not be assessed any penalty if the Contract is terminated because of the decision of the Minnesota Legislature, or other funding source, not to appropriate funds. The

State must provide the Contractor notice of the lack of funding. This notice will be provided within a reasonable time of the State’s receiving notice.

Force Majeure.

Neither party shall be responsible to the other or considered in default of its obligations within this Contract to the extent that performance of any such obligations is prevented or delayed by acts of God, war, riot, disruption of government, or other catastrophes beyond the reasonable control of the party unless the act or occurrence could have been reasonably foreseen and reasonable action could have been taken to prevent the delay or failure to perform. A party relying on this provision to excuse performance must provide the other party prompt written notice of the inability to perform and take all necessary steps to bring about performance as soon as practicable.

Indemnification.

In the performance of this Contract, the Indemnifying Party must indemnify, save, and hold harmless the State, its agents, and employees, from any claims or causes of action, including attorney’s fees incurred by the State, to the extent caused by Indemnifying Party’s:

• Intentional, willful, or negligent acts or omissions; or

• Actions that give rise to strict liability; or

• Breach of contract or warranty.

The Indemnifying Party is defined to include the Contractor, Contractor’s reseller, any third party that has a business relationship with the Contractor, or Contractor’s agents or employees, and to the fullest extent permitted by law.

The indemnification obligations of this section do not apply in the event the claim or cause of action is the result of the State’s sole negligence. This clause will not be construed to bar any legal remedies the Indemnifying Party may have for the State’s failure to fulfill its obligation under this Contract.

Nothing within this Contract, whether express or implied, shall be deemed to create an obligation on the part of the State to indemnify, defend, hold harmless or release the Indemnifying Party. This shall extend to all agreements related to the subject matter of this Contract, and to all terms subsequently added, without regard to order of precedence.

Governing Law, Jurisdiction, and Venue.

Minnesota law, without regard to its choice-of-law provisions, governs this Contract. Venue for all legal proceedings out of this Contract, or its breach, must be in the appropriate state or federal court with competent jurisdiction in Ramsey County, Minnesota.

Contract Use by State Agencies.

To the extent applicable, the Contract does not prohibit state agencies from using their delegated purchasing authority to procure similar goods and services from other sources.

Warranty.

The Contractor warrants to the ordering entity that materials and equipment furnished under the Contract will be free from defects not inherent in the quality required or permitted, and that the work will conform to the requirements of the contract. Work not conforming to these requirements, including substitutions not properly approved and authorized in writing may be considered defective. The Contractor’s warranty excludes remedy for damage or defect caused by abuse, modifications not executed by the Contractor, improper or insufficient maintenance, improper operation, or normal wear and tear and normal usage. If requested, the Contractor shall furnish satisfactory evidence as to the kind and quality of materials and equipment used.

All installation materials and labor shall be guaranteed for a period of one (1) year following the date of final acceptance.

During the first year following acceptance, the Contractor shall, upon notification by the ordering entity of any malfunctions, make necessary repairs, including labor, travel, and materials, at the Contractor’s expense.

Original Equipment Manufacturer (OEM Warranty).

The equipment offered must include the OEM standard warranty. The Contractor is responsible for the cost of any inspections, adjustments, warranted parts, and labor charges to repair or replace warranted parts that are a result of equipment failure(s) during the warranty period. This shall be performed promptly unless otherwise mutually agreed in writing by the Customer and the Contractor. This warranty shall commence when the unit is put into service.

OEM Extended Warranty Options. If the Contractor provides an OEM Extended Warranty Option, the Contractor must provide a copy of the applicable terms and conditions, including a detail of coverage, to the State upon request. The cost of an OEM Extended Warranty must include all associated costs.

Contractor (Add-On) Warranty Options. The Contractor may provide additional warranty options, which include, but are not limited to travel pickup, or delivery charges that are a result of equipment failure(s) prior to or during the warranty period or extended warranty period. This warranty option shall commence when the unit is put into service and is in addition to OEM warranty options stated above.

Delivery.

Contractor is obligated to deliver within the quoted lead times. If delivery is not made within that time frame, the State reserves the right to deem the Contractor in default.

Contractor must confirm delivery locations and requirements with the ordering entity. Prior to delivery, the Contractor is responsible for confirming in writing with the ordering entity that the delivery location will accommodate unloading the equipment. Contractor must notify the receiving entity at least 72 hours before delivery to allow for inspection and compliance. No delivery can be made on a State Holiday (as defined in Minn. Stat. § 645.44, subd. 5), on Saturday or Sunday, or after 4:00 p.m. Central Time on weekdays, without prior written approval by the receiving entity.

Risk of Loss.

The State is relieved of all risks of loss or damage to the goods and equipment during periods of transportation, installation by the Contractor, or while in the possession of the Contractor or its agent.

Purchase Orders and Purchasing Cards.

The parties agree that there is no minimum order requirements or charges to process an individual purchase order unless otherwise stated in the Contract. The Purchase Order number must appear on all documents (e.g., invoices, packing slips, etc.).

Equipment Specifications.

All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract.

Items Offered as New.

All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

Product Changes During the Contract.

All product offered should be available during the initial term of the contract. The Contractor must notify the State’s Authorized Representative immediately if the manufacturer discontinues or replaces a contracted model number. A replacement model number must meet the contract specifications. The State is under no obligation to accept a replacement model. Any change to a contracted model number must be confirmed in writing by the State through a written amendment. The State reserves the right to request documentation for any requested change under this section to evaluate how the specifications of the replacement product deviates from the specifications of the replaced product.

Product Returns.

Non-Defective Conforming Product. The Customer may return an unopened, non-defective product conforming to the specifications of an order within 60 calendar days of the invoice date with no additional fees. If the non-defective conforming product is returned within 60 calendar days of the invoice date after it has been opened, the Contractor may charge the Customer a restocking fee of up to 10% of the cost of the product. Return shipping costs to return a non-defective conforming product to the Contractor is the responsibility of the Customer.

Defective or Non-conforming Product. The Customer may return any product determined by the Customer as defective or not conforming to the specifications, order, or contract, within 60 calendar days of receipt with no restocking or return shipping fee.

The Contractor should provide the Customer with a Return Merchandise Authorization number (RMA) and must arrange for a “call tag” to be issued via a “carrier” to order pick up of the defective or non-conforming product from the Customer. The “carrier” must pick up the defective or non-conforming product at the address to which the product was shipped.

Replacement of Defective or Non-conforming Product. The Customer may request the Contractor provide a replacement product or cancel the order. If the Customer choses to have the defective or non-conforming product replaced, the Contractor must replace a defective or non-conforming product at no cost to the Customer.

Return of Defective or Non-conforming Product (without replacement). The Customer’s account must be credited within fourteen (14) calendar days of arrival of the returned product at the Contractor’s location. The amount to be credited must be the equal of the price of the product plus all freight, shipping, handling, or ancillary charges associated with shipment of the product from and return to the shipping location. If, after inspection, the Contractor determines that the product is not defective or non-conforming, the Contractor may bill the Customer for the return shipping charges.

Subcontracting.

This Contract may not be subcontracted in whole or in part.

Data Disclosure.

Under Minn. Stat. § 270C.65, subd. 3 and other applicable law, the Contractor consents to disclosure of its social security number, federal employer tax identification number, and Minnesota tax identification number, already provided to the State, to federal and state agencies, and state personnel involved in the payment of state obligations. These identification numbers may be used in the enforcement of federal and state laws which could result in action requiring the Contractor to file state tax returns, pay delinquent state tax liabilities, if any, or pay other state liabilities.

Government Data Practices.

The Contractor and State must comply with the Minnesota Government Data Practices Act, Minn. Stat. Ch. 13, (or, if the State contracting party is part of the Judicial Branch, with the Rules of Public Access to Records of the Judicial Branch promulgated by the Minnesota Supreme Court as the same may be amended from time to time) as it applies to all data provided by the State under this Contract, and as it applies to all data created, collected, received, stored, used, maintained, or disseminated by the Contractor under this Contract. The civil remedies of Minn. Stat. § 13.08 apply to the release of the data governed by the Minnesota Government Practices Act, Minn. Stat. Ch. 13, by either the Contractor or the State.

If the Contractor receives a request to release the data referred to in this clause, the Contractor must immediately notify and consult with the State’s Authorized Representative as to how the Contractor should respond to the request. The Contractor’s response to the request shall comply with applicable law.

Assignment of Antitrust Rights.

Upon the request of the State of Minnesota, Contractor will irrevocably assign to State any state or federal antitrust claim or cause of action that the Contractor now has or which may accrue to the Contractor in the future, in connection with any goods, services, or combination provided by Contractor under the terms of this Contract.

Contractor’s Documents.

Any licensing and maintenance agreement, or any order-specific agreement or document, including any pre-installation, linked or “click through” agreement that is allowed by, referenced within or incorporated within the Contract whenever the Contract is used for a State procurement, whether directly by the Contractor or through a Contractor’s agent, subcontractor or reseller, is agreed to only to the extent the terms within any such agreement or document do not conflict with the Contract or applicable Minnesota or Federal law, and only to the extent that the terms do not modify, diminish or derogate the terms of the Contract or create an additional financial obligation to the State. Any such agreement or document must not be construed to deprive the State of its sovereign immunity, or of any legal requirements, prohibitions, protections, exclusions or limitations of liability applicable to this Contract or afforded to the State by Minnesota law. A State employee’s decision to choose “accept” or an equivalent option associated with a “click-through” agreement does not constitute the State’s concurrence or acceptance of terms, if such terms are in conflict with this section.

State Audits.

Under Minn. Stat. § 16C.05, subd. 5, the Contractor’s books, records, documents, and accounting procedures and practices relevant to this Contract are subject to examination by the State, the State Auditor, or Legislative Auditor, as appropriate, for a minimum of six years from the expiration or termination of this Contract.

Publicity and Endorsement.

Publicity. Any publicity regarding the subject matter of this Contract must identify the State as the sponsoring agency and must not be released without prior written approval from the State’s Authorized Representative. For purposes of this provision, publicity includes notices, informational pamphlets, press releases, information posted on corporate or other websites, research, reports, signs, and similar public notices prepared by or for the Contractor individually or jointly with others, or any subcontractors, with respect to the program, publications, or services provided resulting from this Contract.

Endorsement. The Contractor must not claim that the State endorses its products or services.

Debarment by State, its Departments, Commissions, Agencies, or Political Subdivisions.

Contractor certifies that neither it nor its principals is presently debarred or suspended by the Federal government, the State, or any of the State’s departments, commissions, agencies, or political subdivisions. Contractor’s certification is a material representation upon which the Contract award was based. Contractor shall provide immediate written notice to the State’s Authorized Representative if at any time it learns that this certification was erroneous when submitted or becomes erroneous by reason of changed circumstances.

Contingency Fees Prohibited.

Pursuant to Minn. Stat. § 10A.06, no person may act as or employ a lobbyist for compensation that is dependent upon the result or outcome of any legislation or administrative action.

Certification of Nondiscrimination (in accordance with Minn. Stat. § 16C.053).

If the value of this Contract, including all extensions, is $50,000 or more, Contractor certifies it does not engage in and has no present plans to engage in discrimination against Israel, or against persons or entities doing business in Israel, when making decisions related to the operation of the vendor's business. For purposes of this section, "discrimination" includes but is not limited to engaging in refusals to deal, terminating business activities, or other actions that are intended to limit commercial relations with Israel, or persons or entities doing business in Israel, when such actions are taken in a manner that in any way discriminates on the basis of nationality or national origin and is not based on a valid business reason.

Non-discrimination (in accordance with Minn. Stat. § 181.59).

The Contractor will comply with the provisions of Minn. Stat. § 181.59.

Hazardous Substances.

To the extent that the goods to be supplied to the State by the Contractor contain or may create hazardous substances, harmful physical agents, or infectious agents, as set forth in applicable State and federal laws and regulations, the Contractor must provide the State with Material Safety Data Sheets regarding those substances. A copy must be provided upon request. Goods and containers supplied to the State must be labeled in compliance with state and federal laws, rules, and regulations.

These terms apply to goods supplied under this contract:

Products Containing Triclosan Banned. The Contractor must comply with Minn. Stat. § 145.945.

Products Containing Certain Types of Polybrominated Diphenyl Ether Banned. The Contractor must comply with Minn.

Stat. § 325E.385-325E.388).

Coal Tar Sealant Use and Sale Prohibited. The Contractor must comply with Minn. Stat. § 116.202.

Products Containing Mercury. The Contractor must comply with Minn. Stat. 116.92.

Products containing PFAS. The Contractor must comply with Amara's Law (Minn. Stat. § 116.943), which took effect in Minnesota January 1, 2025. The law applies all products sold or distributed under the contract and prohibits the sale or distribution of some products with intentionally added PFAS within Minnesota.

Uniforms.

Contractors and their subcontractors shall be properly uniformed prior to entering any facility. The Contractor’s or their subcontractor’s company name must be identifiable on the uniform.

IT Accessibility Standard.

The State of Minnesota (Executive branch state agencies) has developed IT Accessibility Standard effective September 1, 2010. The standard entails, in part, the Web Content Accessibility Guidelines (WCAG) 2.1 (Level AA) and Section 508 which can be viewed at: https://mn.gov/mnit/government/policies/accessibility/.

The Standards apply to web sites, software applications, electronic reports and output documentation, training delivered in electronic formats (including, but not limited to, documents, videos, and webinars), among others. As upgrades are made to the software/products/subscriptions available through this Contract, the Contractor agrees to develop functionality which supports accessibility. If any issues arise due to nonconformance with the above mentioned accessibility Standards, the Contractor agrees to provide alternative solutions upon request at no additional charge to the State.

https://www.revisor.mn.gov/statutes/cite/116.943#stat.116.943 https://mn.gov/mnit/government/policies/accessibility/

When updates or upgrades are made to the products or services available through this Contract, the Contractor agrees to document how the changes will impact and/or improve the product’s/service’s accessibility and usability. This documentation, upon request, must be provided to the State in advance of the change, occurring within an agreed upon timeframe sufficient for the state to review the changes and either approve them or request a remediation plan from the Contractor. If agreed-upon updates fail to improve the product or service’s accessibility or usability as planned, the failure to comply with this requirement may be cause for contract cancellation or for the State to consider the Contractor in default.

Survival of Terms.

The following clauses survive the expiration or cancellation of this Contract: Indemnification; State Audits; Government Data Practices; Intellectual Property; Publicity and Endorsement; Governing Law, Jurisdiction, and Venue; and Data Disclosure. Any other Contract term that expressly states or by its nature shall survive, shall survive.

Exhibit B: Insurance Requirements

This Contract does not have any insurance requirements.

Exhibit C: Specifications, Duties, and Scope of Work

Scope: Fire suppression skid units to be deployed by Forestry for wildfires and for prescribed burns as needed.

General Specification Notes:

1.1. Unit price must include all costs associated with this project. Which include items such as freight, materials, manual and warranty (if applicable)

1.2. Vendors must be an authorized dealer or reseller(s) for the product requested.

1.3. DNR will be the determining factor if vendor meets specifications. The State of Minnesota reserves the right to reject any or all bids or portions thereof; to waive any irregularities or informalities in bids received and to cancel the solicitation if it is considered in the best interest to the state.

1.4. DNR reserves the right to inspect prior to delivery. The DNR reserves the right to refuse delivery of the product if it’s not constructed to these specifications or if the product is substandard in regard to quality, workmanship, or craftsmanship.

1.5. When brand names or manufacturers’ numbers are stated in the specifications, they are intended to establish a standard only and are not restrictive unless the solicitation (event) specifies “no substitute”. Responses will be considered on other makes, models, or brands having comparable quality, style, and performance characteristics. Vendor should attach product specifications sheet.

1.6. Responses that do not comply with the solicitation will be considered nonresponsive and will be rejected. The award will be made to the lowest responsible vendor meeting the specifications and all terms and conditions.

The State reserves the right to award items separately, by grouping items, or by total, whichever is deemed most advantageous to the State. The responder may quote “all or none” but unit prices for each item must be shown. The responder must specify if quoting “all or none.”

1.7. The equipment shall be the most current advertised production model (unless otherwise specified)

1.8. The equipment must meet all applicable codes and standards, must be sized and adjusted per the manufacture’s recommendations and must not exceed the manufacturer’s maximum ratings.

2. Specifications

2.1. The following line 1 (line numbers coincide with line number in SWIFT): Qty 2 - 75 Gallon L-Type UTV fire suppression skid unit

2.1.1. Tank size: Approximately 34"L x 47"W x 21"H

2.1.2. Skid size with reel: 34"L x 47"W x 41"H

2.1.3. Wick 100-4H, single stage Pressure Pump with 2.5hp Honda Engine (mini-striker) or DNR Approved equal engine

2.1.4. Stainless Steel Hose Reel with 3/4" GHT male riser

2.1.5. Reel hose: 100ft. of 3/4in. lightweight reel hose with 3/4" GFT field repairable coupling

2.1.6. Valved discharges

2.1.6.1. 1 x 1" tank fill/circulation

2.1.6.2. 1 x 3/4" hose reel

2.1.6.3. 1 x 1" overboard discharge NPSH with cap & chain

2.1.6.4. 1 x 1 1/2" overboard discharge in NH with cap & chain

2.1.6.5. 1 x pressure relief valve

2.1.6.6. 1 1/2" dia x 8ft lightweight suction hose with 1 1/2" foot valve/strainer

2.1.7. Short Modular Quick Disconnect Multi Use Tray

3. Delivery Date and Location

3.1. Delivery Date: June 16, 2025, or earlier is desired however, the DNR will work with vendor on delivery if needed.

3.2. Delivery Address:

3.2.1. One Skid Unit will be shipped to: MN Dept of Natural Resources, 1801 S Oak St, Lake City, MN 55041-

3.2.2. One Skid Unit will be shipped to: MN Dept of Natural Resources, 912 Houston St NW, Preston, MN

55965

3.3. Shipment will be FOB Destination with the delivery costs included into the contract price.

3.4. The DNR Should be notified immediately if delivery lead times cannot be met.

3.5. The DNR requires the Contract Vendor to contact the delivery site 48 hours prior to delivery. Standard delivery hours are M-F 8AM-4PM

4. Equipment warranty, Recalls, and Service Updates

4.1. The equipment offered must include the manufacturer’s standard warranty.

4.2. All warranty work must be done within the state of Minnesota unless mutually agreed by the Customer and the

Contractor.

4.3. The Customer reserves the right to require the work to be subcontracted if it facilitates and expedites the completion of the warranty work.

4.4. The Contract Vendor shall be responsible for the cost of any inspections, adjustments, parts, labor, travel, pickup and/or delivery charges that are a result of equipment failure(s) prior to or during the warranty period.

4.5. The contract vendor shall be the single contact through which Customers arrange warranty work.

4.6. This warranty will commence once the invoice is paid in full by DNR.

4.7. Any current factory recalls, or service updates must be completed by the awarded vendor prior to delivery to the DNR. Contract Vendor must provide written documentation showing that the equipment being delivered is free of any required factory updates or recalls.

4.8. The warranty work shall be performed as soon as possible within a reasonable amount of time.

5. Product Sales Literature. Upon request by a State Agency, the Contractor must provide product sales literature at no cost to the requestor. Product sales literature should include items such as, but not limited to:

5.1. Product information, product functionality, safety instructions, and operation instructions.

5.2. All applicable manuals (either paper or electronic format).

Exhibit D: Pricing

Contract Pricing.

In General. Prices listed take into consideration all inherent costs of providing the requested goods and services. The Contractor agrees to pay any and all fees, including, but not limited to: duties, custom fees, permits, brokerage fees, licenses and registrations, government taxes, overhead, profit, parking permits, proper disposal of materials, insurance payments. The State will not pay any additional charges beyond the price(s) listed, unless otherwise provided for by law or expressly allowed by the Contract. Prices listed within Exhibit D are maximum prices. These maximum prices shall remain firm for the initial term of the Contract. The Price List may not include any additional terms or conditions. A unit price and a total for the quantity must be stated for each item quoted. Prices must be quoted in United States currency.

Any increase to Contract pricing requires a duly executed amendment to this Contract. Contractor may provide lower pricing at its discretion without requiring a duly executed amendment to the Contract.

SWIFT Line Description Unit Price

1 75 Gallon L-Type UTV Fire EA $1.00 Suppression Skid Unit

Prompt Payment Terms.

Contractor’s payment terms are Net 30, or better.

Delivery.

Contractor must deliver the ordered goods June 16, 2025, or earlier is desired however, the DNR will work with vendor on delivery if needed.

Transportation.

All prices must be FOB Destination, prepaid and allowed (with freight included in the price), to the ordering entity’s receiving dock or warehouse, or as otherwise instructed on the purchase order by the ordering entity. In those situations in which the “deliver-to” address has no receiving dock or agents, the Contractor must be able to deliver to the person specified on the purchase order.

Taxes.

Do not add sales tax to the prices being offered. State Agencies hold a Direct Payment Authorization Letter which is used to pay applicable taxes directly to the Department of Revenue. Contractors may go to http://www.revenue.state.mn.us to learn about the applicable sales tax (search “Fact Sheet 142”).

Invoice Requirements.

Contractor hereby waives the right to enforce any term which contradicts or modifies any term of the solicitation or any Contract that may result, including subsequent amendments to the Contract, or would result in an unencumbered expense if enforced against the state. Contract quote and invoice must contain, at a minimum:

• Customer name

• State Contract number field

• Item/service description

• Item quantity or service hours

• List price http://www.revenue.state.mn.us/