Salient Characteristics W911QX-23-Q-0164.doc
DOC document 80 KB Posted
- Solicitation number
- W911QX23Q0164
About this file
This document outlines the salient characteristics for a solicitation seeking one press brake with CNC multi-axis synchro and specialized tooling, software, training, and freight. The solicitation requires a press brake that contains FastBEND Multi-Touch Premium touch functions and offline PartManager 3D software. The press brake must allow independent operation of the Y1 and Y2 axes, achieve specified speeds on the 1500 and 200kN models, and include tooling and punching capacities for various sheet metal gauges. Additional requirements include dimensions, speeds, motor power, voltage, and conformance to ANSI B11.3 safety standards. The solicitation is a small business set-aside issued by the Department of the Army Materiel Command Army Contracting Command at Aberdeen Proving Ground. The press brake and all included items must be delivered by 16-18 weeks after order receipt to the specified address to support complex fabrication and machining activities aiding the Army Research Laboratory mission.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Evaluation Criteria (LPTA) W911QX-23-Q-0164.doc | DOC document | |
| Section 889 NDAA Certification W911QX-23-Q-0164.docx | DOCX document | |
| Provisions and Clauses Full-Text Attachment (for Combo Synopsis-Solicitation) W911QX23Q0164.rtf | RTF text file |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.
Signature (typed name): Charlie Kranz, FCDD-RLA-SA
Technical Point of Contact (TPOC)
The Contractor shall provide one (1) Press Brake in accordance with the following specifications:
· System shall be a Computer Numerical Control (CNC) multi-axis synchro press brake.
· Shall contain FastBEND Multi-Touch (MT) Premium touch functions.
· Shall contain offline PartManager 3-Dimensional (3D) software to process 3D products.
· System shall allow the Y1 and Y2 axes to operate as an independent double acting hydraulic system.
· System shall result in upper beam speeds of 200 millimeters/second (mm/s) Fast Approach and 125 mm/s Return Speeds on 1500 and 200 kilonewton (kN) models.
· System shall result in back gauge (GA) speeds up to 1000 mm/s.
· System shall have a stroke height of 6 inches.
· System shall have a maximum load weight of 230 pounds.
· System shall have a stroke X-axis of 40 inches with a speed of 39.3 inches per stroke.
· System shall have a stroke R-axis of 5.1 inches with a speed of 9.8 inches per stroke.
· System shall have a stroke Z1 and Z2 axes with a speed of 39.3 inches per stroke.
· System shall have a capacity of 275 US Short Tons.
· Shall have a distance of 102” between side frames.
· Shall have a working length of 122 inches.
· Shall have a standard gap of 15.75”
· Shall have a stroke of 10.6 inches.
· Shall have a table height of 35 inches.
· Shall have a fast approach speed of 307 inches per minute.
· Shall have a max working speed of 18.9 inches per minute.
· Shall have a fast return speed of 213 inches per minute.
· System shall have a 25 horse power motor.
· System shall be a total of 167 inches in length.
· System shall be a total of 80 inches in width.
· System shall be a total of 115 inches in height.
· System shall have a voltage requirement of 480 Volts.
· System shall have a frequency of 60 Hertz.
· System shall conform to American National Standard Institute (ANSI) B11.3 “ for machine tools.
· System shall have service tools included.
· Shall contain tooling for the following
· 18GA through 14GA
· 10GA through 13GA
· 1/4 inch through 9GA
· 3/8 inch through 5/16 inch
· 1/2 inch
· System shall have a pan forming punch.
· Shall contain one (1) safety operator and service manual.
· Shall include hydraulic oil.
· Shall include one-year warranty on parts and labor including set up and operational instructions.
· Shall include factory tech set up and training.
· Shall include freight and rigging
· Delivery to 6375 Johnson Road, building 321, Aberdeen Proving Ground 21005 no later than 16-18 weeks After Receipt of Order (ARO).
Contracting Officer:
Template last updated 07/28/2016
File details come from the government source that posted it. Updated .