Salient Characteristics v2 (Laser System).doc
DOC document 79 KB Posted
- Attached to
- Laser System
- Solicitation number
- W911QX-24-Q-0102
About this file
This document is a Salient Characteristics Commercial Availability Certification for a pulsed neodymium: yttrium aluminum garnet (Nd: YAG) laser system. The laser system must meet or exceed the following requirements: energy per pulse from 0 to 825 millijoules, pulse width from 5 to 15 nanoseconds, wavelength of 1,064 nanometers, pulse repetition rate of 10 Hertz, beam diameter of 7 to 12 millimeters, beam divergence less than 0.5 milliradians, and 2% pulse-to-pulse energy stability for at least 8 hours. The system shall include a power supply, cooling unit, quick installation kit, and remote control unit. Shipping to the destination is required.
The related federal contract opportunity is Solicitation Number W911QX-24-Q-0102 for a Laser System, issued by the Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground. The solicitation package also includes Evaluation Criteria, a Combination Synopsis-Solicitation, and Provisions and Clauses.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combination Synopsis-Solicitation for Commercial Purchases (Under SAT) (Laser System).docx | DOCX document | |
| Provisions and Clauses Full-Text Attachment (for Combo Synopsis-Solicitation) (Laser System).doc | DOC document | |
| Evaluation Criteria (Comparative) (Laser System).docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.
Signature (typed name): Frank De Lucia Technical Point of Contact (TPOC) or Contracting Officer’s Representative (COR)
The Contractor shall provide one (1) pulsed neodymium: yttrium aluminum garnet (Nd: YAG) laser. The system shall meet or exceed the following requirements:
· A range from zero (0) to at least eight hundred twenty five (825) millijoules (mJ) of energy per laser pulse
· Laser pulse width between five (5) to fifteen (15) nanoseconds (ns)
· Laser wavelength of 1,064 nanometers (nm)
· Pulse repetition rate of ten (10) Hertz (Hz)
· Beam diameter between seven (7) to twelve (12) millimeters (mm)
· Beam divergence less than zero point five (0.5) milliradians (mrad)
· A pulse to pulse energy stability of two (2) percent (%) for at least eight (8) hours
· Shall include a power supply with 100-240 Volts Alternating Current (VAC) and 50/60 Hertz (Hz), single phase, 1100 volt-ampere (VA)
· Power supply/cooler shall be no larger than 25 inches (“) x 25“ x 15“
· Laser head should be no larger than 25 ”x 10” x 10”
· Remote control unit to interface with laser to control laser parameters
· Shall include a cooling unit with an air to water heat exchanger that operates between 18 to 28 degrees Celsius (°C)
· Shall be an air to water heat exchanger
· Shall include a quick installation kit
· The Contractor shall provide shipping to Destination.
Contracting Officer:
Template last updated 07/28/2016
File details come from the government source that posted it. Updated .