Salient Characteristics V2 1.docx
DOCX document 27 KB Posted
- Attached to
- Outside Plant Telephone Equipment
- Solicitation number
- M0068126Q0057
- Issued by
-
United States Marine Corps
About this file
This document is a Salient Characteristics specification for a telecommunications infrastructure support solicitation issued by the United States Marine Corps for Marine Corps Air Ground Combat Center (MCAGCC) Twentynine Palms, California. The requirement encompasses nine categories of telecommunications and fiber optic materials necessary to support installation, expansion, repair, replacement, and sustainment of MCAGCC's communications infrastructure. All materials must be new, unused, and commercially available, with delivery required no later than August 1, 2026, on an FOB Destination basis.
The specific products required include: eighty (80) Category 6 telecommunications jacks in white and red; sixty (60) four-port telecommunications faceplates; six (6) wall-mounted fiber distribution cabinets with minimum 24-fiber capacity; one hundred (100) single-mode fiber pigtail assemblies with SC connectors; approximately 3,000 feet of 24-fiber single-mode indoor/outdoor plenum-rated armored fiber cable; fifteen (15) spools of poly pull line with high-visibility tracer; ten (10) surge-protected power strips with minimum seven outlets and 540 Joules protection; twenty (20) packages of black nylon UV-rated cable ties; and four (4) Corning Part Number CC4E4621259-UF001B pre-connectorized fiber housings with 144-fiber capacity and factory pre-terminated 153-meter fiber stubs. All products must demonstrate full compatibility with existing MCAGCC telecommunications infrastructure, including Electronics connectivity products, PLP fiber cabinets, and Corning fiber distribution systems. Brand name or equal products are permitted, provided offerors furnish technical documentation proving physical, functional, and operational compatibility, with the burden of equivalency proof resting with the offeror.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - M0068126Q0057.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics General Requirements
· Materials shall be new, unused, and commercially available.
· Materials shall support installation, expansion, repair, replacement, and sustainment of the MCAGCC telecommunications infrastructure.
· Materials shall be fully compatible with existing MCAGCC telecommunications systems and infrastructure.
· Delivery required no later than 01 August 2026.
Compatibility Requirements
· The Government currently utilizes Electronics telecommunications connectivity products, PLP fiber cabinets and splice closures, and Corning pre-connectorized fiber housing systems throughout the installation.
· Products offered shall be fully compatible with existing MCAGCC telecommunications infrastructure.
· Products shall integrate with existing Government-owned equipment and systems without requiring modification to existing infrastructure.
· Offerors proposing alternate products shall provide sufficient technical documentation demonstrating physical, functional, and operational compatibility with existing installed systems.
· The Government reserves the right to determine whether proposed alternate products meet the compatibility requirements of this solicitation.
· The pre-connectorized fiber housing shall be compatible with the existing Corning CCH/FlexNAP fiber distribution infrastructure currently installed aboard MCAGCC.
· For the pre-connectorized fiber housing requirement, the Government requires Corning Part Number CC4E4621259-UF001B to maintain compatibility with existing infrastructure.
Description
1. Category 6 Telecommunications Jacks
· Category 6 telecommunications jack.
· Compatible with existing MCAGCC telecommunications outlet infrastructure.
· TracJack-compatible design.
· Suitable for commercial Ethernet applications.
· Color options compatible with existing MCAGCC identification and labeling practices.
· Quantity: 80 (40 White and 40 Red).
2. Telecommunications Faceplates
· Four-port, single-gang telecommunications faceplate.
· Compatible with existing MCAGCC telecommunications outlet infrastructure.
· Suitable for Category 6 telecommunications applications.
· Quantity: 60.
3. Fiber Wall Mount Cabinet
· Wall-mounted fiber distribution cabinet.
· Minimum 24-fiber capacity.
· Suitable for single-mode fiber applications.
· Compatible with existing MCAGCC fiber management systems.
· Quantity: 6.
4. Fiber Pigtail Assemblies
· Single-mode fiber pigtail assembly.
· Minimum 12-fiber configuration.
· SC connector compatibility.
· Suitable for fiber splicing and termination applications.
· Quantity: 100.
5. Fiber Cable
· 24-fiber single-mode fiber cable.
· Indoor/Outdoor rated.
· Plenum rated.
· Armored construction.
· Total required quantity: approximately 3,000 feet.
· Suitable for telecommunications backbone and outside plant applications.
6. Pull String
· Poly pull line with high-visibility tracer.
· Minimum 6,500-foot spool or bucket.
· Suitable for telecommunications conduit installations.
· Quantity: 15.
7. Surge-Protected Power Strips
· Minimum seven (7) outlets.
· Minimum 540 Joules surge protection.
· Minimum four (4) foot power cord.
· Suitable for telecommunications equipment support.
· Quantity: 10.
8. Cable Ties
· Black nylon cable ties.
· Minimum 14-1/2 inch length.
· UV Rated
· Minimum 100 cable ties per package.
· Suitable for telecommunications cable management.
· Quantity: 20 packages.
9. Pre-Connectorized Fiber Housing
· Corning Part Number CC4E4621259-UF001B or Government-approved equivalent.
· 4U rack-mounted fiber distribution housing.
· Minimum 144-fiber capacity.
· Single-mode fiber compatible.
· Factory pre-connectorized design.
· SC duplex connector compatibility.
· Compatible with existing Corning CCH fiber distribution infrastructure.
· Includes pre-terminated/stubbed fiber assembly.
· Minimum stub length of approximately 153 meters (500 feet).
· Supports telecommunications backbone and distribution applications.
· Designed for integration with existing MCAGCC fiber management systems.
· Quantity: 4.
Delivery Requirements
· FOB Destination.
· Delivery location: MCAGCC Twentynine Palms, California.
· Delivery required no later than 01 August 2026.
Brand Name or Equal Justification
· Electronics telecommunications connectivity products, PLP fiber cabinets and splice closures, and Corning pre-connectorized fiber housing systems are identified as the current standards utilized within MCAGCC telecommunications infrastructure.
· Brand Name or Equal products may be offered.
· Any proposed equal product must meet all stated salient characteristics and compatibility requirements.
· The burden of proving equivalency rests with the offeror.
File details come from the government source that posted it. Updated .