Salient Characteristics Sunshades - Sources Sought.pdf
PDF 100 KB Posted
- Attached to
- ATC-Tower Sunshades
- Solicitation number
- FA560625QA045
About this file
This document is a Salient Characteristics document for a contract request to replace sunshades in the Spangdahlem AB air traffic control tower. The requirement specifies detailed sunshade dimensions, including 11 lower sunshades with top rails of 100 inches and bottom rails of 101.5 inches, 1 additional lower sunshade with top rail of 101.5 inches and bottom rail of 90 inches, and 12 upper sunshades with 35-inch wide top and bottom rails. All sunshades are isosceles trapezoid shaped and must comply with FAA Order 6930.22 and Specification FAA-E-2470 for Transparent Plastic Window Shades from June 07, 1971. The primary purpose of these replacement sunshades is to reduce direct and reflective glare, contribute to temperature control, and ensure operational efficiency in the air traffic control tower.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 6930.22 (FAA-E-2470).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics, Contract Requests
Requirement and Justification: The purpose of this requirement is to replace old and damaged Plastic-View sunshades in Spangdahlem AB air traffic control tower. The shades are required to reduce direct and reflective glare, contribute to temperature control, and ensure operational efficiency.
Salient Characteristics
Sunshades: The replacement sunshades must meet the following physical, functional, and performance characteristics:
• 11x lower sunshade with dimensions: top rail: 100in wide, bottom rail: 101.5in wide, isosceles trapezoid shaped.
• 1 x lower sunshade with dimensions: top rail 101.5 inches wide, bottom rail 90 inches wide, isosceles trapezoid shaped.
• 12 x upper sunshades with dimensions: top rail 35 inches wide, bottom rail 35 inches wide.
Specifications: The sunshades and supporting hardware and must be IAW the FAA Order 6930.22, Specification FAA-E-2470 for Transparent Plastic Window Shades, dated June 07, 1971.
(https://www.faa.gov/regulations_policies/orders_notices/index.cfm/go/document.information/docu mentID/9867) https://www.faa.gov/regulations_policies/orders_notices/index.cfm/go/document.information/documentID/9867 https://www.faa.gov/regulations_policies/orders_notices/index.cfm/go/document.information/documentID/9867
File details come from the government source that posted it. Updated .