Salient Characteristics (redacted).pdf

PDF 187 KB Posted

Attached to
NOTICE OF TOTAL SMALL BUISNESS SET ASIDE: One (1) Electrostatic Discharge (ESD) Machine
Solicitation number
W911QX21Q0230
Issued by

View the file

Other files

File Type Posted
Combination Synopsis-Solicitation for Commercial Purchases (Under SAT).pdf PDF
Provisions and Clauses Full-Text Attachment (for Combo Synopsis-Solicitation).pdf PDF
Evaluation Criteria (Tradeoff - Supply).pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Template last updated 07/28/2016

Salient Characteristics

Commercial Availability Certification:

I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.

The Contractor shall provide one (1) Electrostatic Discharge (ESD) Machine that meets the stated Salient Characteristics and shall be shipped FOB Destination to Aberdeen Proving Ground (APG):

• The Electrostatic Sensitivity Tester shall meet the criteria as set forth in MIL- STD-1751A, Group 1030, Methods 1031, 1032 and 1033 also the Criteria in

NATO STANAG 4490.

• The power supply shall provide at a minimum a single, regulated output of five

(5) kilovolts direct current (kVdc) at ten (10) milliamperes to charge the capacitors.

• The capacitor bank consists of at a minimum of 11 capacitors which vary in capacitance from 0.0001 to 0.5 Farad capacitance (cF) and are rated for ten (10) Kilovolt (kV) working voltage.

• Each of the capacitors shall be wired to a capacitor selector switch which allows only one (1) of the capacitors to discharge at a time.

• The discharge apparatus consists of a needle electrode and a grounded sample post which form a point-to-plane electrode geometry.

• The needle electrode is connected to a Teflon push rod which allows movement of the electrode towards the sample holder post. The charged upper electrode is released and moves downward to the preset gap distance. The needle will puncture the tape, penetrate the sample materials, discharge through the interstices of the material, and rise again to its initial position.

• The contractor must provide a conceptual drawing of its approaching needle design as referenced in MIL-STD-1751A, Group 1030, Method 1033.

• Delivery shall be 90 days after contract award (ACA)

Template last updated 07/28/2016

Technical Point of Contact (TPOC):

8/19/2021

X REDACTED

Technical Point of Contact Signed by: REDACTED

Contracting Officer:

8/24/2021

X Salma Khairedin

Contracting Officer (KO) Signed by: KHAIREDIN.SALMA.M.1514583095

File details come from the government source that posted it. Updated .