Salient Characteristics FA481924QA072.pdf
PDF 118 KB Posted
- Attached to
- Manual Lathe and Equipment - Tyndall, AFB Federal contract opportunity
- Solicitation number
- FA481924QA072
About this file
This document contains the Salient Characteristics for a 325 MXS Manual Lathe, which is being procured under Solicitation FA481924QA072 for the Department of the Air Force Air Combat Command. The Salient Characteristics outline the technical specifications and required accessories for the manual lathe, including motor power, voltage, speed range, spindle and chuck requirements, bed dimensions, and required attachments and accessories. The Solicitation is a 100% Small Business Set-Aside with a NAICS code of 333517, Machine Tool Manufacturing. Pricing submitted in response to the Request for Quote (RFQ) must remain valid until November 5, 2024. Interested contractors must be registered in the System for Award Management (SAM) prior to award.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combo RFQ FA481924QA072.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics For 325 MXS Manual Lathe
Specifications:
• Have at least a 3 HP motor
• Must be able to operate off of 230V 3 Phase or 460V 3 Phase power
• Variable speed selection ranging from apprx. 50-4000 RPM
• Must accept 5C collets as well as 6 inch diameter, 3 or 4 jaw chucks as well as a drive plate/drive dog
• 1-1/16” 5C thru-collet spindle bore
• Solid hardened and ground alloy tool steel bed
• Full-bearing carriage with turcite-B coated slideway bearing material between carriage and bed
• T-Slot compound
• Inch/metric reading on dials
• Digital readout system
• Mult-station turret
• Dimensions of at least 60” x 24” x 50” and no larger than 85” x 36” x 68”
• Minimum 17” and maximum 24” between centers
• Have the ability to use a taper turning attachment
• Have steady rest and follower rest support
• Machine must be able to cut metric and standard threads
List of Materials (Attachments and Accessories) for Manuel Lathe (pg. 2)
Nomenclature UoM Quantity
Manual Lathe (as descried above) EA 1
6” 4-Jaw Chuck & CTL-023 EA 1
6” 3-Jaw Chuck & CTL-023 EA 1
Threaded Positive Stops (solid stop) EA 1
Universal Collet Stop EA 1
5C Headstock Center for Drive Plate EA 1
Drive Plate EA 1
Drive Dog EA 1
Chuck Mounting Plate for CTL-029 EA 1
Fine Turning Chuck (requires CTL-028) EA 1
Expanding Collet Pads EA 1
Knurling Holder .314” (no tools pick 036B, C, or D) EA 1
Knurling Holder .472” (no tools pick 036B, C, or D) EA 1
Knurling Tool – Cross 45deg (requires CTL-036 or 36A) EA 1
Knurling Tool – Diamond 30deg (requires CTL036 or 36A) EA 1
Knurling Tool – Stripe (requires CTL-036 or 36A) EA 1
Quick Change Tool Post European Style (no holders pick below) EA 1
Turning & Facing Holder for CTL-037 EA 1
Drilling & Boring Bar Holder CTL-037 EA 1
Tool Setting Gauge EA 1
Carriage Length Indicator (less indicator) EA 1
Indicator Carriage Stop (less indicator) EA 1
Steady Rest EA 1
Follower Rest EA 1
Six Station Turret EA 1
Adjustable Holder (for 6 station turret) EA 1
16C Collets for CTL-045-11 (M3,4,5,6,8,10,12) EA 7
Releasing Tap Holder Collet Type Uses CTL-045-10 EA 1
Centering and Facing Tool (for 6 station turret) EA 1
Releasing Die Nut Holder (for 6 station turret) EA 1
Tool Holder Extension (for 6 station turret) EA 1
Adjustable Rotary Stops (for 6 station turret) EA 1
Slide Tool (for 6 station turret) EA 1
Quick Acting Recessing Tool (for 6 station turret) EA 1
Taper Turning Attachment EA 1
Four Station Turret EA 1
Male Dead Center EA 1
Live Center EA 1
13 – MT#2 Drill Chuck EA 1
16 – MT#2 Drill Chuck EA 1
19 – MT#2 Drill Chuck EA 1
Electric Magnifier Lamp EA 1
Chip Coolant Shield EA 1
¼” Drill Chuck Adapter JT#1 CTL-032 (for 6 station turret) EA 1
3/8” Drill Chuck Adapter JT#2 CTL-033 (for 6 station turret) EA 1
1/2” Drill Chuck Adapter JT#3 CTL-034 (for 6 station turret) EA 1
1/2” Drill Chuck Adapter JT#6 CTL-035 (for 6 station turret) EA 1
File details come from the government source that posted it. Updated .