Salient Characteristics_Dual Source Laser System.doc
DOC document 76 KB Posted
- Attached to
- Dual Source Laser System
- Solicitation number
- W911QX24Q0034
About this file
This document outlines the salient characteristics for a dual source laser system solicitation. The solicitation seeks one dual source laser system with a minimum cutting area of 36 by 24 inches and overall dimensions to fit through a 70 by 80 inch door. The system must use a 100 watt CO2 laser and 50 watt fiber laser and be able to cut 0.4 inch acrylic and engrave aluminum. Additional requirements include a vector cutting grid, air assist pump, rotary attachment, installation, training for employees, freight and shipping, and a two year warranty. The solicitation was issued by the Department of the Army Materiel Command Army Contracting Command at Aberdeen Proving Ground.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Evaluation Criteria (Comparative evaluation).docx | DOCX document | |
| Provisions and Clauses Full-Text Attachment 24Q0034.docx | DOCX document | |
| Combination Synopsis-Solicitation for Commercial Purchases 24Q0034.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.
Signature (typed name): John Fess, FCDD-RLA-SA Technical Point of Contact (TPOC)
The Government requires one (1) dual source laser system in accordance with the following minimum specifications:
· Shall have a large cutting area with minimum measurements of 36 inches x 24 inches
· Shall have overall dimensions that will allow the machine to fit through a building entrance door 70 inches wide x 80 inches tall
· Shall use a dual source laser system
· Shall have at least a 100 watt carbon dioxide (CO2) laser source
· Shall have at least a 50 watt fiber laser source
· Shall be able to cut a .4 inch acrylic sheet
· Shall be able to engrave into aluminum
· Shall have a vector cutting grid
· Shall have an air assist pump
· Shall have a rotary attachment
· Shall include installation
· Shall include training for shop employees
· Shall include freight, shipping and handling
· Shall include 2 year warranty
Contracting Officer:
Template last updated 07/28/2016
File details come from the government source that posted it. Updated .