SALIENT CHARACTERISTICS.pdf
PDF 84 KB Posted
- Attached to
- Fabrication T-38 Brake Riveter Rotary Table
- Solicitation number
- 2026PKBSourcesSought
About this file
This document provides salient characteristics and specifications for a T-38 Brake Riveter Rotary Table required for fabrication purposes. The turntable is a 12-inch precision unit with a table diameter of 12.00 inches and base diameter ranging from 12.00 to 14.00 inches, with a total assembly height of 2.75 inches. The table features 12 lock locations positioned at 30-degree intervals and is capable of supporting localized rivet forming pressures up to 2,000 PSI on a 0.250-inch diameter area while maintaining rotational capabilities and accuracy, as well as supporting a total load of 800 pounds on the table surface.
The turntable incorporates hardened and ground steel bearing surfaces for enhanced toughness and flatness, with precision bearings positioned near the outer periphery to provide additional stability and accuracy. The unit maintains a standard concentricity tolerance of 0.000030 inches as measured by standard ball check procedures and is sealed to prevent contamination from machine particles, dust, dirt, and coolant. The tabletop is furnished with drilled and tapped holes, and the base is supplied with mounting holes for installation and integration into the fabrication assembly.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
FOR Fabrication T-38 Brake Riveter Rotary Table
• 12” Precision Turntable
• Table Diameter: 12.00”, Base Diameter 12.00” – 14.00”, Turntable Assembly
Total Height: 2.75”
• Table has 12 total lock locations at 30-degree intervals.
• Capable of supporting localized 0.250” diameter rivet forming pressures up to
2,000 PSI on table surface while maintaining rotational capabilities and accuracy.
• Capable of supporting 800 lbs. on table surface while maintaining rotational capabilities and accuracy.
• All bearing surfaces are steel: hardened for toughness and ground for flatness.
• Standard concentricity, 0.000030” Inch, measured by standard ball check procedures.
• Table rotates on precision bearings.
• Has bearings located near the outer periphery of the table for additional stability and accuracy.
• Turntable is sealed to prevent contamination from machine particles, dust, dirt and coolant.
• Tabletop furnished with drilled and tapped holes, base supplied with mounting holes.
File details come from the government source that posted it. Updated .