Salient Characteristics.pdf

SALIENT CHARACTERISTICS

This is an identified model or equal acquisition in accordance with FAR 52.211-6, to be considered for award, offers of “equal” products must meet the following salient physical, functional, or performance characteristics minimum requirements:

QTY UNIT MODEL # DESCRIPTION

EA

07-16517

SWET II (SHALLOW WATER TRAINER) CHAIR

Survival System’s Shallow Water Egress Trainer (SWET) is a very effective procedures training device. It is an excellent familiarization tool to use for trainees who have a fear of water, who are uncomfortable underwater in an inverted position, who have no experience of breathing from compressed air systems, or who are novices in helicopter underwater escape training. By gradually adapting to required incremental training levels, trainees gain confidence in their abilities prior to training in the Modular Egress Training Simulator. The SWET is a single-place, emergency egress trainer having a specially designed frame fitted with buoyancy pods that allow it to be easily handled and inverted by instructors.

FEATURES:

• Constructed of lightweight, marine-grade aluminum Free floating

• Adaptable to a 3-4, or 5-point harness

• Provided with one generic exit

• Provided with one exit mechanism handle

• Free Floating

• Rotates through any axis

• Emergency seatbelt release system for extra safety

• Collapsible

• Easily Transportable

SAFETY:

• The SWET II is fabricated to minimize sharp edges, corners, or other protuberances that might cause injury to the trainee and / or instructor (s) above, on, or below the surface of the water.

• The SWET is used in the shallow end of a pool (4’) to allow for complete safety of a trainee should (s) he experience difficulty with a training sequence. Because of its specially designed shape; use of lightweight materials, and positioning of buoyancy pods, the SWET can be righted within two

(2) seconds.

• The SWET incorporates a simple, fail-safe emergency exit that is easily removable thus ensuring the safety of the trainee and control of the training exercise.

• The SET is a durable training aid designed for repetitive use in a pool-training environment.

CHARACTERISTICS:

• Gross Weight: 45.2 kg (100lbs)

• Measurements:

a. Length: 132 cm (52”)

b. Width: 132 cm (52”)

c. Height: 119 cm (47”)

• Storage Dimensions:

a. Length: 142 cm (56”)

b. Width: 104 cm (41”)

c. Height: 48 cm (19”)

• Frame Material 6061-T6 Marine-Grade Aluminum

• Buoyancy: Standard Marine Fenders

• Sub-Components: Lexan and HDPE Plastic

2 EA 07-1206 4 POINT ROTARY BELT

Refers to a safety harness used in SWET II Chair. The belt is a crucial component of the harness system that secures participants in the SWET II simulator.

• 4 Point: This refers to the number of attachment points of the harness to the occupant, typically at the shoulders and hips, for secure restraint.

• Rotary Belt: This likely describes the type of buckle system used in the harness, rotary buckles offer a quick and reliable release mechanism, which is critical in emergency egress situations.

2 EA PUSH-E PUSHOUT EXIT (SWET)

The SWET II incorporates a simple, fail-safe, emergency exit that is easily removable, thus ensuring the safety of the trainee and control of the training exercise.

• Provided with one generic exit

• Provided with one exit mechanism handle

1 EA SHIPPING TO:

CHARLESTON TRANSPORTATION OFFICE

437TH APS BLDG 178, 113 SOUTH BATES ST

CHARLESTON AFB, SC 29404

CUSTOMER SERVICE: (843) 963-3188