SALIENT CHARACTERISTICS.pdf

Laser Machine Specifications

JML DOC #: 21370156

-Must have a 36” x 24” x 9” work area

-Must be a grid-style cutting table

-Must have the capability to cut leather, fabric, rubber, paper, wood, and acrylic

-Must have the capability to engrave leather, bare metal, rubber, paper, wood, fabric, and acrylic

-Must include a “status” light on the machine

-Machine must have dimensions: 53” x 32” x 40” +/- 1”

-Must be a dual source laser that includes: 80 watt CO2 laser and 50 watt fiber laser

-Must be an air cooled laser machine

-Laser tubes must be made of metal and ceramic

-Must include a 2” CO2 lens

-Must include a 3” fiber and dual source lens

-Must have a touch screen control at the laser

-Machine must be able to store at least 1 GB of memory (For saving templates we use often)

-Engraving speed: 165 IPS (4.2 m/s)

-Electrically it must be a plug in machine with 110 V, 60 Hz, single phase power

-Must be approved through C/106 prior to purchase of any model machine

-Must be approved through C/109 prior to purchase.

-Must come with an internal filtration system option for purchase that will work in conjunction with laser machine. The filtration system must also must be approved through C/106 before purchase.

-If the laser machine is not UL listed it must have the option to purchase a NRTL certification, to be performed at the factory, prior to delivery to PSNS.

-If the laser machine normally comes with a camera externally or internally, it must be disabled at the factory

-If the laser machine comes with WIFI capability, it must be disabled at factory

-Resolution must be user controlled, 75 to 1200 DPI

-There must be a 2 year warranty included the purchase covering all parts on the machine

Laser Machine Specifications

-Must include basic onsite training from the vendor for setup included in quoted price, C/702 can work with the vendor to set this up once a contract has been awarded and a delivery date is known.

Fume Extractor System specification

JML DOC # 21370157

-Must be an internal filtration system, no outside exhaust systems

-Machine must have a footprint of: 4’ x 2’ x 3’ +/- 1”

-Cabinet construction must be brushed stainless steel

-Airflow/pressure: 500cfm/100m bar

-Electrical: 115v, 60/50hz

-Must weigh under 350 lb.

-Noise level: <63dBA

-Surface media area: 30m2 approx

-Machine must use a HEPA filter and filter media must be borosilicate

-Filter efficiency: At least 95%

-Filter house: Must be constructed of mild steel

- HEPA filter media must be Borosilicate

-Machine must be approved through C/106 safety and health before purchase

-Must be UL listed and come with supporting certification documents. If not UL listed then the machine must have a NRTL certification at a minimum with certification documentation to support inspection.

-Must be compatible with laser machine purchased on this contract, this system is to work with that machine

-Must include all hose connection kits that connect extractor to laser machine

NRTL Test and Inspection for Laser machine

JML DOC: 21370158

-Laser machine must have a NRTL test and inspection performed at the manufacturer prior to shipping to PSNS per C/106 approval

-NRTL testing standards must be performed in accordance with UL 61010

-A Label plate must be installed on the laser machine stating the UL listing in a visible location

-All testing and testing results must be printed in a report and sent with the machine upon arrival to PSNS

-NRTL testing must include the following with results in the report:

*Dielectric strength

*insulation resistance test data

*Voltage and current readings

*Component temperature rise data

*E-stop and interlock test

*Grounding continuity test

*Leakage current test

*Cord strain-relief pull test