SALIENT CHARACTERISTICS.pdf

Laser Machine Specifications

JML DOC # 20330931

Salient Characteristics must include:

36” x 24” x 9” cutting/engraving table

Grid-style cutting table

The capability to cut leather, fabric, rubber, paper, wood, and acrylic

The capability to laser on to various bare metal types, and other materials such as, plastic, rubber, wood, fabric, and acrylic.

Include a “status” light on the machine

Have the dimensions: 53” x 32” x 40” +/- 1”

Be a Dual Source Laser that includes: 60 watt CO2 laser and 50 watt fiber laser.

-To include a 2” CO2 lens

-To include a 3” fiber and dual source lens

Laser tubes must be made of metal and ceramic

Be an air cooled laser machine

Have a touch screen control at the laser

Machine must be able to store at least 1 GB of memory (For saving templates we use often)

Engraving speed: 165 IPS (4.2 m/s)

Capable of installing an attachment of a 3 Jaw Chuck Rotary Attachment that allows odd shaped items to rotate for precise alignment.

Electrically it must be a plug in machine with 110 V, 60 Hz, single phase power

Must be approved through C/106 prior to purchase of any model machine

Must be approved through C/109 prior to purchase.

Must come with an internal filtration system option for purchase that will work in conjunction with laser machine. The filtration system must also must be approved through C/106 before purchase.

If the laser machine is not UL listed it must have the option to purchase a NRTL certification, to be performed at the factory, prior to delivery to PSNS.

Laser Machine Specifications

If the laser machine normally comes with a camera externally or internally, it must be disabled at the factory

If the laser machine comes with WIFI capability it must be disabled at factory

-Resolution must be user controlled, 75 to 1200 DPI

-There must be a 2 year warranty included the purchase covering all parts on the machine

-Must include basic onsite training from the vendor for setup included in quoted price, Shop/06 will work with the vendor to set this up once a contract has been awarded and a delivery date is known.

JML Document #20330932

Fume Extractor System Characteristics to Include:

An internal filtration system, no outside exhaust systems

Machine must have a footprint of: 4’ x 2’ x 3’ +/- 1”

Cabinet construction must be brushed stainless steel

Airflow/pressure: 500cfm/100m bar

Electrical: 115v, 60/50hz

Must weigh under 350 lb.

Noise level: <63dBA

Surface media area: 30m2 (approximate)

Machine must use a HEPA filter and filter media must be borosilicate.

-Filter efficiency: At least 95%

-Filter house: Must be constructed of mild steel

- HEPA filter media must be Borosilicate

-Machine must be approved through C/106 safety and health before purchase.

-Must be UL listed and come with supporting certification documents. If not UL listed then the machine must have a NRTL certification at a minimum with certification documentation to support inspection.

-Must be compatible with laser machine purchased on this contract, this system is to work with that machine.

-Must include all hose connection kits that connect extractor to laser machine.