SALIENT CHARACTERISTICS.pdf

Minimum Requirements for Magnetic Particle Inspection (MPI) Machine

(JML 12246933 – 12246939)

6,000 Amps 3-Phase FWDC magnetizing current capacity

Integrated 6000 DC reversible demagnetization feature

Operates on 460 Volt 3-phase AC, 60 Hz

5% duty cycle of 0.5 seconds on, 10 seconds off at max output

Self-adjusting voltage capability to make up for voltage fluctuations

MPI machine has to be computer controlled (PLC)

Circular and longitudinal magnetizing current outputs independently adjustable

Touch screen controls

Current assurance indicator light

Adjustable magnetizing shot time from 0.5 to 2 seconds

External pump agitator system for inspection solution

20 inch coil 460 Volt 60 Hz for longitudinal inspection

MPI built to NRTL standards CSA C22.2 NO 61010-1 or UL 61010-1

Include NRTL approved schematic for NRTL certification after installation at PSNS

Wet MT machine footprint approximately 90” length x 41” width

Maximum part weight capacity unsupported is 300 lb

Maximum part length that can be inspected is 54”

Fully Assembled with exception of overhead LED lamps and mounts

Inspection enclosure hood with ventilation fan

Two (2) ST700 Stationary overhead LED UV lamp, 115 Volt, 60 Hz with certification

Two (2) overhead inspection hood mounting fixtures for LED UV lamp

Minimum 3 year equipment warranty on parts