Salient Characteristics.docx

Salient Characteristics(Brand name only)

i. Only US manufactured MIL spec GPS repeater systems are authorized. US manufactured components are required for use with U-2 aircraft platform.

ii. Precise control over output signal level utilizing “smart” controller

iii. Oscillation detection and mitigation

iv. L2 Offset Mode for isolation and amplification of L2 signal (military).

v. GPS L1/L2 Filter

vi. Antenna monitoring with alarm

vii. Diagnostic Fault Reporting

vii. All components must be able to resist UV, rain (waterproof), extreme temperature changes, lighting, chemical and jet fuels.

iix. GPS repeater must be able to repeat Y-Code signal

ix. Repeated signal must be within a 10 msec tolerance

x. All equipment and/or accessories that the contractor procures shall be corrosion resistant, i.e. galvanized/stainless steel/paint to include hardware like (bolt, nuts, washers).

xi. Resistance for all lightning protection and grounding shall be 5 ohms maximum.

xii. System must utilize GPS Source brand products with only AC Military Standard L1/L2 frequecy capabilities

xiii. System must utilize 110VAC

xiv. System must contain acitve antenna, passive antenna with amplifier, surge protector, level controller, and means to connect all parts together for operational use

xv. Contractor must provide all equipment required for installation, to include but not limited to personnel lifts (cherry picker), safety harness, etc.