Salient Characteristics.docx
DOCX document 17 KB Posted
- Attached to
- One (1) Oscilloscope
- Solicitation number
- W911QX26QA141
About this file
This document is a Salient Characteristics specification sheet that outlines the technical requirements for an oscilloscope procurement. The oscilloscope must meet stringent performance specifications including a minimum bandwidth of 8 GHz, four independent recording channels with 50-ohm input impedance capability, and sampling rates exceeding 20 Gigasamples/second. Each channel must support recording capacity of at least 100 million samples at the specified sampling rate. The instrument must feature SMA connectors or adapters, an external display for standalone operation, and dual connectivity options via Ethernet and USB interfaces to enable remote computer control.
The oscilloscope must be configured as 19-inch laboratory rack-mountable equipment with all required mounting hardware included. The unit shall be delivered complete with power supply and all accessories necessary for immediate operation upon receipt, operating on standard 110V AC power. This specification supports the Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground's pre-solicitation for one oscilloscope (Solicitation Number W911QX26QA141), as detailed in the related presolicitation notice.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Presolicitation Notice.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Oscilloscope specifications
1. The oscilloscope must have a bandwidth greater than or equal to 8,000,000,000 hertz (also commonly termed 8 GHz).
2. The oscilloscope must have four independent recording channels.
3. The oscilloscope must have at least one external trigger input.
4. Each of the four independent recording channels must be capable of running with an input impedance of 50 ohms
5. Each of the four independent channels must be capable of recording at a sampling rate greater than 20000000000 samples per second (also commonly termed 20 Gigasamples/s or 20 Gsamp/s or 20 Gs/s).
6. Each of the four independent channels must be capable of recording 100,000,000 (100M) samples @ 20 Gigasamples/second or greater
7. The four independent channels must have SubMiniature version A connectors (SMA connectors) or adapters to SMA
8. The oscilloscope must have an external display so it can run as a standalone entity.
9. The oscilloscope must be able to interface with a computer to be controlled remotely.
10. The oscilloscope must have an Ethernet interface.
11. The oscilloscope must have a USB interface.
12. The oscilloscope must be capable to mount in a standard 19” laboratory rack
13. The oscilloscope must come with the hardware to mount in a 19” laboratory rack
14. The oscilloscope must come with the power supply and all accessories so as to be run upon receiving.
15. The oscilloscope must run on standard 110 volt alternating current power (110V ac).
File details come from the government source that posted it. Updated .