Salient Characteristics.docx

14 KB Posted

Attached to
7490--Purchase of 3D Printer
Solicitation number
36C26225Q1025
Issued by

About this file

Written by GovTribe AI ·

The file contains a Salient Characteristics document outlining technical specifications for a 3D printer, complemented by a Sources Sought RFI from the Department of Veterans Affairs (VA) for the Southern Arizona VA Health Care System. The VA seeks to purchase one 3D printer with specific requirements, including a print volume of 47 x 23.6 x 25 inches, a closed print chamber, single print head, maximum hot-end temperature of 285°C, filament run-out sensor, printing speed up to 150mm/s, semi-automatic bed tilt leveling, and an Aluminum MIC-6 build plate.

The RFI, issued under solicitation number 36C26225Q1025, is seeking market research and potential small business sources, with a response deadline of June 25, 2025. Interested vendors must provide detailed information including company details, small business status, product specifications, delivery timelines, pricing, and reference contracts. The VA suggests the MODIX BIG-120Z V4 3D PRINTER KIT with enclosure as a reference product but is open to equivalent alternatives. Respondents must be registered in the System for Award Management (SAM) and provide comprehensive documentation demonstrating capability to meet the specified salient characteristics.

View the file

Other files

File Type Posted
Request for Information.docx DOCX document
36C26225Q1025.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Salient Characteristics Key Features will allow Healthcare Technology Management (HTM) Service’s Additive Manufacturing Program to increase customer base by utilizing the larger build plate. These key features are:

· Must have a print volume of 47 x 23.6 x 25 inch

· Must include a closed print chamber

· Shall contain one print head

· Will have a hot-end maximum temperature of 285 degrees Celsius

· Shall include a filament run-out sensor to detect empty filament rolls

· Will have a printing speed of up to 150mm/s

· Must have a print bed that has semi-automatic bed tilt leveling

· Shall have a maximum print bed temperature of 120 degrees Celsius

· Must contain an Aluminum MIC-6 build plate

File details come from the government source that posted it. Updated .