Salient Characteristics.doc

77 KB Posted

Attached to
SOLE SOURCE- SOLE SOURCE SOLICITATION FOR QUANTITY ONE (1) TUNABLE DIODE LASER
Solicitation number
W911QX24Q0202
Issued by

About this file

Written by GovTribe AI ·

This document is a Salient Characteristics Commercial Availability Certification, which outlines the minimum technical specifications for a Tunable Diode Laser required by the Department of the Army Materiel Command, Army Contracting Command Aberdeen Proving Ground.

The key requirements include: tuning range of 760-810 nanometers, linewidth less than 1 kilohertz, mode-hop-free tuning over 30 gigahertz, wavelength precision of 0.2 nanometers, wavelength calibration to a Rubidium gas cell, power stabilization within 1% RMS, USB communication controls, 60dB optical isolation, and 120VAC 60Hz power. The laser must be commercially available and meet these salient characteristics. This certification is related to a sole source solicitation for one Tunable Diode Laser under Solicitation Number W911QX24Q0202.

View the file

Other files

File Type Posted
Redacted DnF for OTFOC TOPICA_Redacted.pdf PDF
Provisions and Clauses Full-Text Attachment (for Combo Synopsis-Solicitation).doc DOC document
Combination Synopsis-Solicitation for Commercial Purchases.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Salient Characteristics

Commercial Availability Certification:

I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.

Signature (typed name): _____George A. Newburgh______

Technical Point of Contact (TPOC) or Contracting Officer’s Representative (COR)

The Contractor shall provide one (1) Tunable Diode Laser that has the following minimum specifications, or equivalent:

· Shall be capable of tuning from 760 nanometers (nm) – 810 nm of instantaneous wavelength linewidth of less than 1 kilohertz (kHz) and mode-hop-free wavelength tuning of over 30 gigahertz (GHz).

· Shall be capable of motorized tuning to 0.2 nm in wavelength precision.

· Shall be capable of wavelength calibration to integrated Rubidium (Rb) gas cell.

· Shall be capable of stabilization of output power to within 1% Root Mean Square (RMS).

· Shall have an availability of commands set for the control and readout of laser functions via universal serial bus (USB) communication to the external computer.

· Shall be capable of possessing an optical isolator of 60 Decibels (dB) for the isolation of laser diode from unwanted optical feedback.

· Laser output shall accept technology standard Ferrule Connector / Angled Physical Contact (FC/APC) polarization maintaining (PM) fiber port receptacle with its narrow key aligned to the laser’s slow axis.

· Shall be powered through a North American standard 3-prong NEMA 5-15 grounded (Type B) power cord to accept power from 120 volt alternating current (AC) at 60 hertz.

Contracting Officer:

Template last updated 07/28/2016

File details come from the government source that posted it. Updated .