Salient Characteristics.doc
DOC document 79 KB Posted
- Solicitation number
- W911QX24Q0168
About this file
The document is a Salient Characteristics Commercial Availability Certification, which outlines the minimum requirements for one (1) Global Navigation Satellite System (GNSS) and one (1) Inertial Measurements Units (IMU) system.
The GNSS system must be equipped with multiple GNSS constellations and frequencies, support Real-Time Kinematics (RTK), Precise Point Positioning, and Differential GPS, have a data output rate of 20 Hz or greater, and be capable of integrating with the IMU. The IMU system must be a mid-grade tactical unit with Fiber Optic Gyroscopes and MEMS accelerometers, have a minimum data rate of 200 Hz, and be capable of 9-36 VDC input.
This Salient Characteristics document is related to a 100% Small Business Set-Aside federal contract opportunity (Solicitation Number W911QX24Q0168) issued by the Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground for the procurement of the integrated GNSS and IMU receiver.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Provisions and Clauses Full Text Attachment.pdf | ||
| Combination Synopsis-Solicitation for Commercial Purchases.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.
Signature (typed name): _Edward Rede_______________________
Technical Point of Contact (TPOC) or Contracting Officer’s Representative (COR)
The Contractor shall provide the following minimum characteristic for one (1) Global Navigation Satelite System (GNSS) and one (1) Inertial Measurements Units (IMU) system:
Salient Characteristics for one (1) GNSS system:
1. Equipped with the following GNSS Constellations and frequencies – Global Positioning System (GPS), Globalnaya Navigatsionaya Sputnikovaya Sistema (GLONASS), European Global Navigation Satellite System (GALLILEO), Chinese Navigation Satellite System (BEIDOU), Quasi-Zenith Satellite System (QZSS)
a. Frequencies – L1/L2/L5/L6/E1/E5a/E5b/AltBOC/E6/B1/B2I/B2b/B2a/B3, NavIC L5, SBAS L1/L5.
2. Real-Time Kinematics (RTK), Precise Point Positioning, Differential GPS, Positioning, Navigation, and Timing (PNT).
3. Greater than or equal to 20 Hertz (Hz) output data rate.
4. Base station corrections capable.
5. Equipped with Receiver Autonomous Inegrity Monitoring (RAIM) or Anti-jam/Anti-Spoofing technology (AJ/AS).
6. Capable of Integrating with IMU.
7. Equipped with lever arm input.
8. Single integrated GNSS/ Inertial Navigation Systems (INS) position output with ability to record raw GNSS and IMU measurements.
Salient Characteristics for one (1) IMU system:
1. Equipped with Mid-grade Tactical IMU.
2. Equipped with Fiber Optic Gyroscopes (FOG) and Micro Electro Mechanical Systems (MEMS) accelerometers with the following specifications.
a. FOG
i. Less than or equal to 0.05 deg/hr bias instability
ii. Less than or equal to 0.012 deg/√hr angular random walk
b. MEMS
i. Less than or equal to 0.024 mg bias instability
ii. Less than or equal to 0.032 m/s/√hr velocity random walk
3. Minimum data rate of 200 Hz.
4. Cabling to integrate to GNSS receiver (if not packaged together into single enclosure).
5. Capable of Direct Current (DC) Input voltage of 9-36 Volts Direct Current (VDC) Contracting Officer:
Template last updated 07/28/2016
File details come from the government source that posted it. Updated .