Salient Characteristics.doc

DOC document 72 KB Posted

Attached to
NOTICE OF INTENT TO SOLE SOURCE: One (1) EKSPLA brand Picosecond Optical Source Pulse Laser System (Model Number: SL235-G)
Solicitation number
W911QX-22-Q-0039
Issued by

View the file

Other files

File Type Posted
Combination Synopsis-Solicitation for Commercial Purchases (Under SAT) Laser system.docx DOCX document
Provisions and Clauses Full-Text Attachment (for Combo Synopsis-Solicitation) Laser System.doc DOC document
DnF for OTFOC EKSPLA Laser System (Redacted).doc DOC document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Salient Characteristics

Commercial Availability Certification:

I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.

Signature (typed name): Cyril Williams Technical Point of Contact (TPOC) or Contracting Officer’s Representative (COR)

The Army Research Laboratory (ARL) Weapons and Materials Research Directorate (WMRD) Impact Physics Branch (FCDD-RLW-TC) requires the purchase of one (1) Picosecond Optical Source Pulse Laser System. The Contractor shall provide the following:

The Picosecond Optical Source Pulse Laser System (MN: SL235-G) shall have the following specifications:

· Shall include a Diode-Pumped Solid State oscillator

· Shall have a greater than 100 millijoules (mJ) at more than 1064 nanometer (nm) infrared (IR)

· Shall have a single shot pulse repetition rate.

· Computer-controlled variable pulse duration of: 200 picosend (ps) +/- 20%, 300 ps +/- 20%, 500 ps +/- 20%

· Shall have a pulse duration stability to not exceed 15% standard deviation.

· Shall have a pre-pulse contrast greater than or equal to a ratio of 105:1 (peak to peak residual pulse).

· Shall have a Gaussian spatial beam profile with greater than 85% accurate fit.

· Shall have a square meter (M2) less than 1.5.

· Shall have 200—240 Voltage Alternating Current at single phase at 50-60 hertz (Hz).

· Shall have less than 4 Kilovolt-Ampere.

· Dimensions of the laser power supply cabinet shall not exceed 553 x 600x 653 +/- 3 millimeter (mm).

Contracting Officer:

Template last updated 01/8/2019

File details come from the government source that posted it. Updated .