Salient Characteristics.doc

DOC document 73 KB Posted

Attached to
One (1) Anisoprint Brand Composer A3 3-Dimensional (3D) Printer and accessories
Solicitation number
W911QX-22-Q-0002
Issued by

View the file

Other files

File Type Posted
REDACTED DnF for OTFOC.doc DOC document
Combination Synopsis-Solicitation for Commercial Purchases (Under SAT) Anisoprint.docx DOCX document
Provisions and Clauses Full-Text Attachment (for Combo Synopsis-Solicitation) Anisoprint.doc DOC document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Salient Characteristics

Commercial Availability Certification:

I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.

Signature (typed name): Michael D. Coatney Technical Point of Contact (TPOC) The Contractor shall provide one (1) Anisoprint 3D printer and accessories that meet the Government’s minimum specification requirements listed below:

1. Shall have a composite filament coextrusion dual-matrix carbon fiber and basalt fiber composite printing technology.

2. Shall have a build area of 420mm (millimeters) x 297mm x 210mm (16.5x12x8 inches).

3. Shall weigh no more than 40 kilograms (88 pounds).

4. Shall have a machine footprint of 720mm x 690mm x 500mm (28x27x19 inches).

5. Shall have dual nozzle print head with a fused filament fabrication extruder and composite filament coextrusion extruder with reinforcing filament cutting device.

6. Shall have reinforcing filament of carbon composite fiber supplies with at least 750 m long spools (29,527.5 inches).

7. Shall have a nozzle diameter for fused filament fabrication of 0.4 mm (0.016 inches).

8. Shall have layer thickness of 60 micrometer (μm) (default).

9. Shall have compatible plastics with processing temperatures capable of withstanding 270 degrees Celsius and the diameter of 1.75 mm (0.07 inches): polylactic acid (PLA), polyethylene terephthalate glycol (PET-G), nylon plastic (PA), polycarbonate (PC), acrylonitrile butadiene styrene (ABS).

10. Shall have two (2) slicers, one (1) slicer capable of fused filament fabrication and composite filament coextrusion and one (1) slicer capable of fused filament fabrication.

11. Shall be able to print speed for fused filament fabrication of 10mm/sec – 80mm/sec.

12. Shall be able to print speed for composite filament coextrusion of 1mm/sec – 10 mm/sec.

13. Shall have a plastic filament diameter of 1.75 mm (0.07 inches).

14. Shall be able to interface with at least one SD-card slot and USB-Type B.

15. Shall have an Operating Systems support compatible with Windows 7+.

Template last updated 01/8/2019

File details come from the government source that posted it. Updated .