Salient Characteristics_Art Display Cases- RW edits.docx

Salient Characteristics GENERAL REQUIREMENTS: Items D1 & D2 A. Surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes.

B. Provide shatter-resistant, anti-reflective, museum quality, tempered, low-iron glass

OR,

Clear, anti-reflective, museum quality acrylic:

· Conservation Grade Protection

· ISO 18902 Photo Safe, Safe for Friable Materials Glass used in conjunction with casework, doors, and/or lites shall be in compliance with ANSI Z97.1 C. Lock mechanisms must be flush with the front of the cabinet and cannot protrude past the face of the cabinet D. Multiple lock options (Interchangeable in field, master key must be available for facility) All cabinets keyed with one lock number or any combination of key numbers at no extra cost E. Limited Lifetime Warranty F. Meets ASTM E84, Class A G. Item ‘D2’, Panels shall have minimum 18 gauge steel or stronger support H. Finish of enclosed cabinets shall be constructed of HPL laminate, in ultra-matte finish, (color to be selected by VA interior Designer, from manufacturer’s full line) over low VOC substrate with all edges sealed with matching edge-band or thermo-formed radius edges.

I. Cabinet interiors fully melamine or LPL lined with no exposed substrate.

J. LED LIGHTING: Meet UL Listing requirements; CRI (Color rendering index) to be minimum of 90 or above; fixtures to be shielded to prevent glare/light spill K. All items and cases to be sourced from one manufacturer /supplier

ITEM ‘D1’: 4-Sided, Display Case Quantity: 1 Item ‘D1’ Similar (Image is for representational purposes only)

Freestanding display case shall be constructed and fabricated in accordance with AWI (Architectural Woodwork Institute) “Premium” Grade standards External dimensions 48”w x 30”d x 78”h with enclosed, lockable, accessible storage space at base.

Enclosed base storage dimensions shall be: 48”w x 30”d x 25”H with hinged, locking doors and 1 interior adjustable shelf.

Provide hinged, polished edge, locking doors on width side of showcase Case must be provided with:

- minimum of four (4) recessed, low profile, LED, low voltage, light fixtures (The transformer is remotely mounted in the soffit area)

- quantity of six (6) half-length, clear, interior, adjustable, transparent shelves (per “general requirements” listed above) with double rod suspension system (or comparable) to allow half-width shelves in configuration similar to image D1 illustrated herein. Shelves to be height adjustable in 1” increments.

ITEM ‘D1’: continued The top inside panel finish is charcoal grey (matches bottom shelf). 6’ power cord exits at the bottom of the case and is discrete, low-profile.

Weight capacity of each transparent shelf must be > 20 lbs.

Weight capacity of bottom (non-adjustable shelf) shelf must be > 50 lbs.

Bottom shelf is finished in charcoal grey Nominal 3” Locking, concealed casters HPL Laminate finish w/neutral grey. At exposed exterior surfaces, exposed fasteners are not permitted except at access panels. Sharp edges will be eased. Edges shall be machined flush and filed, sanded, or buffed to remove machine marks and sharp edges.

Final adjustments for gaps, flushness, and alignment shall be in accordance with the AWI 0620-2018 - Finish Carpentry/Installation Standard. Semi-exposed surfaces require consistent color or species to be used throughout entire project.

Joints shall be securely attached, with any adhesive residue removed from exposed and semi-exposed surfaces.

6’ power cord with plug exits at the bottom of the case and is discrete, low-profile. Concealed to connect from base to building infrastructure in the floor.

above finished floor maximum

IMAGE IS NOT TO SCALE

24” LED fixture, secure to partition, both sides Tapered Area for replaceable, descriptive plaque provided & installed by Gov’t, both sides

IMAGE IS NOT TO SCALE

72”

Item ‘D2’ Similar (Image is for representational purposes only)

ITEM ‘D2’: Portable Art Exhibition Walls, Quantity: 4

Two-sided, portable, Art Display panel on platform base Overall dimensions: 72”W X 28”D X 78”H Base is 72”W x 28”D and extends 24” vertically from floor where it begins 1:1 (Rise: Run) taper to two-sided display panel centered from width side. To extend up to 78” overall height (42”H art wall). (See diagram) (Tapered/ angled face of base which will be future location for artist/ gallery plaques- plaques not part of this scope of work Display Panel finish is HPL laminate, ultra-matte finish to be selected by VA Interior Designer Base is made of HPL Laminate finish w/neutral grey, At exposed exterior surfaces, exposed fasteners are not permitted except at access panels. (Base must match finish of 4-Sided Display Case detailed above). Sharp edges will be eased. Edges shall be machined flush and filed, sanded, or buffed to remove machine marks and sharp edges.

Final adjustments for gaps, flushness, and alignment shall be in accordance with the AWI 0620-2018 - Finish Carpentry/Installation Standard. Semi-exposed surfaces require consistent color or species to be used throughout entire project.

Joints shall be securely attached, with any adhesive residue removed from exposed and semi-exposed surfaces.

Panels include adjustable artwork hanger system to attach framed art on both sides of art wall. Art hanger system allows for up to 6 pieces of art to be hung per side, at all vertical and horizontal positions.

6’ power cord with plug exits at the bottom of the case and is discrete, low-profile. Concealed to connect from base to building infrastructure in the floor.

Concealed ganging mechanism to join the units’ together, side-by-side Low voltage LED art light, down lit and shielded from all angles, capable of illuminating up to 45” high art pieces such as Situ Art Lighting ArtTrack LED Art Track Lighting | Minimal, Modular, Plugin, Low Profile (situlighting.com) (or equal) in manufacturer standard finish, to be selected by VA Interior Designer prior to manufacturing Nominal 3” Locking casters (discretely mounted) image2.png image3.png image4.png image5.png image1.emf image10.emf