Salient Characteristics_24Q0012_REDACTED.docx

Salient Characteristics

Commercial Availability Certification:

I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.

Signature (typed name): [REDACTED] Technical Point of Contact (TPOC)

The Government requires one Y-Axis Computer Numeric Control (CNC) Lathe Machine and included options that meet the Government’s minimum requirements:

1. CLIN 0001 – CNC Lathe Machine & Shipping.

The CNC Lathe Machine shall have the following specifications and characteristics:

· Automatic chip removal device with belt type chip conveyor.

· 12 Station BMT65 Automatic tool changer.

· Driven Toolholder Kit for the BMT65 Turret: includes one (1) 90-degree driven toolholder and one (1) straight driven toolholder - Standard BMT65.

· Standard BMT65 Toolholder Kit: Includes three (3) quantities (qty) of one (1) inch (") OD Toolholders, one (1) qty of one (1)" ID Boring Bar Holder, two (2) qty of 1.5" ID Boring Bar Holder.

· Main and feed drive separation.

· Made in the USA.

· Machine software and controller designed and manufactured completely by one (1) company.

· Use either a fully enclosed or semi-enclosed protective device to prevent the chip or cutting fluid from injuring the operator.

· Machine bar feeder with Next Generation Control (NGC).

· Machine & bar feeder made by same manufacturer, that results in seamless integration.

· 5000 Revolutions Per Minute (rpm), 30 Horsepower (hp), belt drive, A2-6 spindle, with no less than 2.50" of bar capacity.

· One (1) Gigabyte (GB) of standard program memory, to include one (1) GB of onboard memory for program storage.

· 32 GB expanded memory.

· High intensity Light Emitting Diode (LED) lighting controlled via machine doors, or manual switch.

· High pressure coolant system capable of providing up to a maximum of 300 pounds per square inch (psi) of coolant to the cutting tool.

· Machine steady rest provisions.

· Automatic tool presetter or equivalent.

· Automatic jet air blast or equivalent.

· 6000 rpm live tooling speeds.

· Early Power-Failure Detection Module that includes a senses power failure or severe drop in incoming line voltage and quickly brings all Axis motion to a safe stop.

· Control Options to include Safe Run, a software feature in the control that reduces the chances of significant machine damage during a machine crash.

· Auto Door for lathes that is capable of opening and closing the machine doors automatically via M-code, or manually via a switch.

· Enclosure exhaust system.

· Hydraulic Quill Tailstock.

· Parts Catcher.

· Minimum 15" color Liquid Crystal Display (LCD) monitor.

· Minimum 55-gallon coolant tank with variable flow coolant pump. Must flow up to 12 gallons per minute at 30 psi at 60 hertz.

· Automatic Coolant Refill System or equivalent.

· Remote jog handle with touchscreen display.

· Synchronized rigid tapping or equivalent.

· On-The-Fly Wye-Delta Switching or equivalent.

· Max cutting diameter of 10" and max cutting length of 22.5".

· Minimum of 8.4" of X Axis, plus or minus two (2)" of Y Axis, and 22.5" of Z Axis travel.

· Wired for 230 voltage (v) – Three (3) Phase.

· Dimensional and weight requirements shall not exceed the following specifications:

· 157-inch operating width.

· 79-inch operating height.

· 102-inch operating depth.

· Shipping to APG, MD.

2. CLIN 0002 – Accessories The following compatible accessories shall be included with the equipment:

· One (1) Bar Feeder Installation Kit.

· One (1) Auxiliary Coolant Filter.

· One (1) Chip tray filter kit.

· One (1) Coolant tank oil skimmer.

· One (1) Liner Guide Adapter Kit.

· One (1) Coolant Nozzle Block for Bolt-On Tool (BOT) Turret.

· One (1) additional BMT65 straight driven live toolholder.

· One (1) additional BMT65 90 degree driven live toolholder.

· One (1) BMT65 Inch Tool holding Kit.

· One (1) Number (#) four (4) MT high precision live center.

· Ten (10) gallons of concentrated Astro cut BCL coolant.

· One (1) HTL-125-3 8" scroll type adjustable lathe chuck jaw boring ring.

· One (1) programming station of Mastercam with controller, complete with multiaxis mill, lathe, and post processor for a super tech CNC grinder.

· One (1) Royal QG-65 A2-6 accu-length collet chuck with one (1) collet installation tool and one (1) of each size 1 ¼", 3/8", ½", 5/8", ¾", 7/8", 1", 1 1/8" collets.

3. CLIN 0003 – Training

· The Contractor shall provide on-site training for Y Axis and live tooling controls. The training person(s) shall be capable of obtaining a visitors security badge.

Contracting Officer:

Template last updated 07/28/2016 image1.emf