Salient Characteristics 13 SEP.docx

21 KB Posted

Attached to
Laser Engraver
Solicitation number
FA3010-Engraver-Williams
Issued by

About this file

Written by GovTribe AI ·

This document is a Request for Information/Sources Sought notice for the procurement of one (1) Fusion Pro 48 Co2 120w Epilog Laser 48 x 36 Engraver or equal. The required engraver must meet the detailed salient characteristics provided, which include specifications such as a 120W CO2 laser, 48" x 36" work area, wireless/ethernet/USB connectivity, and various attachments and capabilities. The Air Education and Training Command is conducting market research to identify potential sources that can meet the government's needs. Responses are due by 3:00 PM CST on Tuesday, September 24, 2024. Interested parties must provide product literature and a written statement confirming compliance with the salient characteristics. This is not a solicitation, and no award will be made as a result of this notice. The purpose is to gauge market interest and capabilities prior to a potential future solicitation.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Keesler Arts & Crafts Center Engraving Shop

HIGH-SPEED LARGE FORMAT LASER ENGRAVER

Salient Characteristics

13 September 2024

BRAND NAME OR EQUAL:

Fusion Pro 48 Co2 120w Epilog Laser 48 x 36 Engraver MUST have the following to be equal:

1. High-speed Co2 120W Class 2 laser engraver with 165 IPS with 5G accelerations capability and have a required power supply no more than 220-240 volts, 50 or 60 Hz, single phase.

2. Large format laser engraver with engravable work area of 48” x 36”. Equipment must be mobile, and dimensions must not exceed: width 70.6”; depth 51.3”; height 43”.

3. 120W Co2 laser for cutting a variety of substrates including acrylic, adonized metal, fabric, glass, paper, wood, etc.

4. Following attachments: Co2 2” Lense and Co2 4” Lense, rotary attachment, and chuck to accommodate odd shaped rotary substrates.

5. Wireless, ethernet, and USB print interface and must be compatible with Windows 10 or above. Engraving software must include photo engraving capability and printer driver installed.

6. The following capabilities/functions:

· built-in or overhead camera for positioning

· automatic focus/centering

· high resolution optics

· red-dot pointer

· job trace feature

· color mapping to link speed, power, frequency

· raster/vector mode

7. Exhaust ports for exterior exhaust venting and air assist pump that blows a contant stream of air across the cutting area to remove heat and combustible gases from the work area.

8. A standard comprehensive warranty for the cost of repair, parts, labor and any affiliated charges to include travel.

9. On-site set up and on-site equipment and software training for four staff members with the option of additional staff members attending for a fee.

10. The engraver will be delivered to and installed in the Engraving Shop, Room 113, located in McBride Common, Bldg. 2222, Keesler AFB, MS 39534.

File details come from the government source that posted it. Updated .