Salient Characterisitcs.docx
DOCX document 17 KB Posted
- Attached to
- BRAND NAME ONLY- Direct Acting Press
- Solicitation number
- N0016426Q0179
About this file
This is a technical specifications document for two direct acting pneumatic press models required by the Naval Sea Systems Command (NSWC Crane) under solicitation N00164-26-Q-0179.
The solicitation is a sole source/brand name only procurement from Schmidt Technology for direct acting presses. The requirement includes three units of the Model 23.200-2.600 press (CLIN 0001) and one unit of the Model 20.100 press (CLIN 0002), with a closing date of June 29, 2026 at 4:00 PM Eastern Time. The Model 23.200-2.600 is the larger unit, featuring a minimum operating force of 945 lbs at 87 psi, a fully adjustable ram stroke up to 200 mm, adjustable working height from 120 mm to 350 mm, and a minimum throat clearance of 86 mm. The Model 20.100 is a smaller variant with a 360 lbs operating force, ram stroke up to 100 mm, and working height adjustable from 80 mm to 220 mm. Both models share common features including a 20 mm ram bore diameter, infinite micrometer stroke adjustment of at least 4 mm range, permanently lubricated air cylinders requiring no mist lubrication, precision ram guides with Teflon-lined steel bushings, torsion-proof operation, precision ground bases with centering bores and T-slots for tooling mounting, and built-in magnet pistons for external position sensing. Both presses must be delivered complete and ready to accept control packages and tooling. Interested vendors may submit capability statements, and all offerors must be registered in the System for Award Management (SAM).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Non_Comp_Redacted.pdf | ||
| Solicitation - N0016426Q0179.pdf | ||
| C07_Synopsis.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Technical Specifications Direct Acting Press
No. 23.200-2.600 Direct Acting Press The press shall meet or exceed the following specifications:
· Operating Force: Minimum 945 lbs. / 4.2 kN at a supply pressure of 87 psi / 6 bar.
· Ram Stroke: Fully adjustable, up to 200 mm / 7.875 inches.
· Stroke Adjustment: Must feature an infinite micrometer stroke adjustment with a range of at least 4 mm / 0.16 inches.
· Ram Bore Diameter: 20 mm.
· Working Height: Must be fully adjustable from 120 mm to 350 mm (4.72" to 13.77").
· Throat Clearance: Minimum of 86 mm / 3.38 inches.
· Lubrication: System shall utilize a permanently lubricated air cylinder that does not require mist lubrication.
· Ram Guide: Precision ram guide with a Teflon-lined steel bushing to ensure smooth, repeatable motion.
· Ram Operation: Must be torsion-proof.
· Base: Precision ground base must include a centering bore and T-slot for mounting tooling.
· Internal Sensing: Piston must contain a built-in magnet to allow for external ram position sensing.
· System Readiness: The press must be delivered complete and ready to accept control packages and tooling.
No. 20.100 Direct Acting Press The press shall meet or exceed the following specifications:
· Operating Force: 360 lbs. / 1.6 kN at a supply pressure of 87 psi / 6 bar.
· Ram Stroke: Fully adjustable, up to 100 mm / 3.937 inches.
· Stroke Adjustment: Must feature an infinite micrometer stroke adjustment with a range of at least 4 mm / 0.16 inches.
· Ram Bore Diameter: 20 mm.
· Working Height: Must be fully adjustable from 80 mm to 220 mm (3.15" to 8.66").
· Throat Clearance: Minimum of 3.38 inches.
· Lubrication: System shall utilize a permanently lubricated air cylinder that does not require mist lubrication.
· Ram Guide: Precision ram guide with a Teflon-lined steel bushing to ensure smooth, repeatable motion.
· Ram Operation: Must be torsion-proof.
· Base: A one-piece, cast iron base that is precision ground and includes a centering bore and T-slot for mounting tooling.
· Internal Sensing: Piston must contain a built-in magnet to allow for external ram position sensing.
· System Readiness: The press must be delivered as a complete basic press, ready to accept control packages and tooling.
File details come from the government source that posted it. Updated .