S02 Workstation Tables RFQ 36C25623Q1420.pdf

36C25623Q1420

COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS

General Information:

Document Type: Combined Solicitation/Synopsis Solicitation Number: 36C25623Q1420 Posted Date: August 17, 2023 Questions Due Date/Time: August 23, 2023/13:00pm (CST) Response Due Date/Time: August 24, 2023/3:00pm (CST Product or Service Code: 6530 Set Aside: Small Business NAICS Code: 337214 Size Standard 1,100 Employees Point of Contact: Justin Clark – Email: justin.clark2@va.gov

Contracting Office Address Department of Veterans Affairs Network Contracting Office 16 Michael E. DeBakey VA Medical Center (MEDVAMC) 5075 Westheimer Road Ste. 750 Houston, TX 77056

Description This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, “Streamlined Procedures for Evaluation and Solicitation for Commercial Items,” in conjunction with FAR Part 13.5 for Certain Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued.

This solicitation is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-04, 06-02-2023.

Contractor is required to be actively registered in the System for Award Management (SAM) and certified as a Small Business under Provision 52.212-3. Vendor quote may be considered non-compliant and rejected if the Contracting Officer is unable to verify registration and certification status.

The associated North American Industrial Classification System (NAICS) code for this procurement is 337214, with a small business size standard of 1,100 employees.

The Department of Veterans Affairs (VA), Southeast Louisiana Veterans Health Care System (SLVHCS), located at 2400 Canal Street, New Orleans, LA, 70119, is requesting to replace existing fleet with Workstation Tables. This is a small business set-aside, brand name or equal RFQ. See B.2 Statement of Work (SOW) B.3 Price/Cost Schedule of the Government’s requirement.

mailto:justin.clark2@va.gov

Table of Contents

SECTION B - CONTINUATION CONTRACT OPPORTUNITIES COMBINED SYNOPSIS

SOLICITATION

B.1 CONTRACT ADMINISTRATION DATA

B.2 STATEMENT OF WORK

B.3 PRICE/COST SCHEDULE

B.4 DELIVERY SCHEDULE

SECTION C - CONTRACT CLAUSES

C.1 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

C.2 VAAR 852.203-70 COMMERCIAL ADVERTISING (MAY 2018)

C.3 VAAR 852.211-70 EQUIPMENT OPERATION AND MAINTENANCE MANUALS

(NOV 2018)

C.4 VAAR 852.212-71 GRAY MARKET AND COUNTERFEIT ITEMS (FEB 2023)

C.5 VAAR 852.215-70 SERVICE-DISABLED VETERAN-OWNED AND VETERAN-

OWNED SMALL BUSINESS EVALUATION FACTORS (JAN 2023) (DEVIATION)

C.6 VAAR 852.215-71 EVALUATION FACTOR COMMITMENTS (OCT 2019)

C.7 VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV

2018)

C.9 VAAR 852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT 2020)

C.10 VAAR 852.246-71 REJECTED GOODS (OCT 2018)

C.11 VAAR 852.247-71 DELIVERY LOCATION (OCT 2018)

SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS

SECTION E - SOLICITATION PROVISIONS

E.1 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB

1998)

E.2 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS

AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

E.3 52.214-21 DESCRIPTIVE LITERATURE (APR 2002)

E.4 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES (NOV 2021)

E.5 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS—

COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2022)

SECTION B - CONTINUATION CONTRACT OPPORTUNITIES

COMBINED SYNOPSIS SOLICITATION

B.1 CONTRACT ADMINISTRATION DATA

(Continuation from Combined Synopsis Solicitation)

1. Contract Administration: All contract administration matters will be handled by the following individual:

a. CONTRACTOR: Company Name:

ATTN/POC Name:

Address:

Phone:

Email:

UEI:

Tax ID:

GSA/FSS, NAC, SEWP Contract# (if applicable):

b. GOVERNMENT: Contracting Officer 36C256

Department of Veterans Affairs

Network Contracting Office 16

Galleria Financial Center

5075 Westheimer Road, Suite 750

Houston TX 77056-5643

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

a. 52.232-33 Payment by Electronic Funds Transfer - System for Award Management through TUNGSTEN

3. INVOICES: Invoices shall be submitted in arrears:

a. Other: Upon receipt and acceptance by the Government

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.

a. Include purchase order number (PO# (TBD)) on all invoices.

5. Offeror shall complete the following located in Sections B thru E of this solicitation to be deemed eligible:

a. Section B- CONTRACT ADMINISTRATION DATA, CONTRACTOR contact information.

b. Section B- PRICE/COST SCHEDULE, unit price, amount, and grand total

c. Section E- 52.204-24 REPRESENTATION REGARDING CERTAIN

TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT

d. Section E- 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS

e. Submission of manufacturer’s authorized distributor letter, cut sheets, and specifications.

6. ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:

AMENDMENT NO DATE

(End of Contract Administration Data)

B.2 STATEMENT OF WORK

Department of Veterans Affairs

Diagnostic Imaging Workstation Tables

A. GENERAL GUIDANCE

1. Title of Project: Diagnostic Imaging Workstation Tables

2. Scope of Work: The contractor shall provide Diagnostic Imaging Workstation Tables that meet the salient characteristics listed below to include shipping and installation at the specified VA Medical Centers.

3. Background: Diagnostic Imaging physicians spend much of their time viewing patient images on hi-definition computer monitors in support of patient care. This may involve the use of one or more computer workstations and up to six monitors. Due to the long hours spent at these diagnostic workstations and the need to use them for quick and accurate diagnosis, it is imperative that the workstations be set up in ways that maximize workflow efficiency and use of ergonomic principles. The tables being purchased allow much flexibility for the users to perform diagnostic reading from a variety of positions. The equipment raises its work surface and monitors for reading from a standing position or sitting position. The user may sit erect or tilt the work surface for recumbent viewing. Lighting levels may be manually or automatically established to create ideal luminance behind the Diagnostic Monitors for minimum eye strain and contrast recognition thus, improving the ability to discern minute gradient of monochrome grayscale images. The workstation is acoustically channeled and is wrapped in a noise absorbent material to improve voice recognition during the transcription of diagnostic reports.

4. Performance Period: The contractor shall complete all work required under this SOW in 120 calendar days or less from date of award, unless otherwise directed by the Contracting Officer.

5. Type of Contract: Firm-Fixed-Price

B. GENERAL REQUIREMENTS

All written deliverables shall be phrased in layperson language. Statistical and other technical terminology shall not be used without providing a glossary of terms.

C. SALIENT CHARACTERISTICS AND REQUIREMENTS

Tables

• Single surface 86.5” wide, arc front multiplex top.

• Weight capacity 255 lbs. on top of the surface

• Height range 27” - 47”

• Includes Cable Management

• 12 outlets in rear cable compartment

• 4 programmable height resets

• Back Ambient Lighting

• Proprietary electro-pneumatic mechanism for smooth height adjustment

Heavy Duty Monitor Mount

• Supports monitors up to 70 pounds each.

Adjustable height/width CPU holder non-Swivel

• 2.75" to 10.5" width

Standard Monitor Mount

• Floating monitor rail supports monitors up to 200 pounds.

Dynamic movement with gas lift operation

• Integrated wire management o 250N - 2.2 to 12.5 lbs. weight range o 450N – 10-23 lbs. weight range o 800N – 14-38 lbs. weight range

• Clamp mount to rail included.

• Up to 32” monitor arm

• Quick release Vesa mount plate

D. DELIVERABLES

The vendor shall ship the tables and mounts to and uncrate and assemble the tables and mounts in configurations shown. The vendor shall provide supervision and labor to assemble the tables and place them into the rooms. The vendor shall test each table separately and repair or replace defective components. The vendor shall provide complete training to each user for the tables. The vendor shall be responsible for removal of all packaging materials and other installation debris from the site.

E. CHANGES TO STATEMENT OF WORK

Any changes to this SOW shall be authorized and approved only through written correspondence from the CO. A copy of each change will be kept in a project folder along with all other products of the project. Costs incurred by the contractor through the actions of parties other than the CO shall be borne by the contractor.

F. POST AWARD MEETING

The vendor shall conduct a post-award meeting with the Contracting Officer and/or the Contracting Officer’s Representative prior to performing any work on this contract. The purpose of this meeting is to establish specific timelines and provide official points of contact at each facility who will provide the contractor with the final customer choices (e.g., colors or other customer-driven variables).

G. GOVERNMENT RESPONSIBILITIES

The Government is responsible for communicating with the contractor promptly if assistance is needed in any matter related to this contract and for allowing reasonable time for contractor response and follow through.

(End of Statement of Work)

B.3 PRICE/COST SCHEDULE

ITEM INFORMATION

ITEM

NUMBER

DESCRIPTION OF

SUPPLIES QUANTITY UNIT UNIT PRICE AMOUNT

3.00 EA _____________

GO2 ARC FRONT WORKCENTER, 4,224.00 12,672.00 220

CM W x 100 CM D (86.5"W x 39.5"D), ELECTRIC SIT-

STAND WITH MEMORY FUNCTION. TOP: MULTIPLEX

WITH SOFTFORMING EDGE. LAMINATE: PFLEIDERER

F7384. FINISH: 029 KA-CABLE DUCT COVER ZM HIGHER

ADD'L WEIGHT FOR M1, M2 - 40-115 KG (80- 253LBS).

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

NATIONAL STOCK NUMBER: NA

LOCAL STOCK NUMBER: 28-EI-GMTF1-02-22-M278

HINGED CABLE TRAY, SLOTTED, 115cm WIDE FOR

200CM & 2200CM GO2 MOVE WORKCENTER WITH 6

DUPLEX UNIT

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: 28-EI-GMKWH-115V2

FLOATING MONITOR RAIL-STRAIGHT 210 CM W ; WITH

UPRIGHTS 82"W FINISH: 022 SILVER STRUCTURE

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: 28-EI-MR-S-21

MONITOR RAIL SUPPORT POST WITH RAIL CLAMP AND

DESKTOP FIXING BRACKET. POST & PLATE FINISH: 022

SILVER STRUCTURE CLAMP: 029 SILVER METALLIC

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: 28-EI-3-RSRC

HEIGHT ADJUSTABLE LCD ARM WITH 4.75" VERTICAL

TRAVEL FROM CENTER (9.5" TOTAL TRAVEL) WITH 360

DEGREE ROTATION AND 200 DEGREE TILT IN ALL

FOUR DIRECTIONS FOR THE MONITOR. THE ARM IS BI-

FOLD WITH A TOTAL REACH OF 18" FROM THE

MONITOR RAIL. FINISH: #124/NEW SILVER WEIGHT

RANGE: 14-38 LBS. MONITOR SPEC:

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: 15-EI-3500-800-124-RF

9.00 EA _____________

HEIGHT ADJUSTABLE LCD ARM WITH 4.75 VERTICAL

TRAVEL FROM CENTER (9.5" TOTAL TRAVEL) WITH 360

DEGREE ROTATION AND 200 DEGREE TILT IN ALL

FOUR DIRECTIONS FOR THE MONITOR. THE ARM IS BI-

FOLDING WITH A TOTAL REACH OF 18" FROM THE RAIL.

FINISH: #124 NEW SILVER WEIGHT RANGE: 2 - 12.5 LBS.

MONITOR SPEC:

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except

Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: 15-EI-3500-250-124-RF

6.00 EA _____________

UNIVERSAL CPU/UPS HOLDER. ADJUSTABLE FROM

2.75" TO 10.5" (67mm TO 267mm). MOUNTS ON EITHER

LEG, INBOARD OR OUTBOARD. SHIPS COMPLETE WITH

THE CONNECTING COLUMN, (2) ALLEN WRENCHES &

EXTENSION TUBES FINISH: 029 SILVER METALLIC

MODEL:

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: 28-EI-GMZC-6

12.00 EA _____________

5M/15' DISPLAY PORT TO DISPLAY PORT

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: 15-EI-01833

SLIM LINE TELEPHONE HOLDER, INCLUDING 7" ARM

EXTENSION, LARGE MOUNTING PLATE, 2 COLLARS,

300MM POST AND DESKTOP FITTINGS. PLATE FINISH:

SILVER METALLIC POST FINISH: CHROME DRAWING

#157821A **NOTE - SPECIFY 1 EA. ORG HOLE ETXX-

00349 ON THE ORDER & REMINDER TO ADD DRAWING

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing

PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: 28-EI-TB

48" INDIRECT, ADJUSTABLE, DIMMABLE LED LIGHT

MOUNTS DIRECT ON RAIL OR DESKTOP. INCLUDES

DIMMABLE LED LIGHT, SURFACE MOUNTED DIMMER

SWITCH AND POWER SUPPLY.

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: 15-EI-WLED-48

1.00 EA _____________

DELIVER, INSTALLATION, CALIBRATION, IN-SERVICE

TRAINING AND SUPPORT. INSTALLATION HOURS ARE

8AM TO 5PM, MONDAY - FRIDAY. IF INSTALLATION IS

REQUIRED AFTER HOURS, AT NIGHT, ON WEEKENDS

OR HOLIDAYS, PLEASE NOTIFY CORONA GROUP INC.

AND A REVISED QUOTE WILL BE PROVIDED.

Contract Period: Base POP Begin: 09-06-2023 POP End: 10-31-2023 PRINCIPAL NAICS CODE: 337214 - Office Furniture (except Wood) Manufacturing PRODUCT/SERVICE CODE: 6530 - Hospital Furniture, Equipment, Utensils, and Supplies

MANUFACTURER PART NUMBER (MPN): NA

LOCAL STOCK NUMBER: INSTALLATION AND TRAIN

GRAND TOTAL ________________

B.4 DELIVERY SCHEDULE

ITEM NUMBER QUANTITY

DELIVERY

DATE

0001-

SHIP TO: Southeast Louisiana Veteran Health Care System

3.00 09/06/2023- 10/31/2023

Diagnostic Imaging Service in the D&T building 2400 Canal St.

New Orleans, LA 70119

USA

MARK

FOR:

Mary Maurice 1-800-935-8387 ext. 72388 mary.maurice@va.gov

SECTION C - CONTRACT CLAUSES

ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following clauses are incorporated into 52.212-4 as an addendum to this contract:

C.1 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/

FAR

Number

Title Date

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE OCT 2018

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE

MAINTENANCE

AUG 2020

52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

DEC 2022

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO

IMPLEMENT STATUTES OR EXECUTIVE ORDERS—

COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES

JUN 2023

52.217-6 OPTION FOR INCREASED QUANTITY MAR 1989

52.217-7 OPTION FOR INCREASED QUANTITY—SEPARATELY

PRICED LINE ITEM

MAR 1989

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL

BUSINESS SUBCONTRACTORS

(End of Clause)

MAR 2023

C.2 VAAR 852.203-70 COMMERCIAL ADVERTISING (MAY 2018)

The Contractor shall not make reference in its commercial advertising to Department of Veterans Affairs contracts in a manner that states or implies the Department of Veterans Affairs approves or endorses the Contractor’s products or services or considers the Contractor’s products or services superior to other products or services.

C.3 VAAR 852.211-70 EQUIPMENT OPERATION AND MAINTENANCE

MANUALS (NOV 2018)

The Contractor shall follow standard commercial practices to furnish manual(s), handbook(s) or brochure(s) containing operation, installation, and maintenance instructions, including pictures or illustrations, schematics, and complete repair/test guides, as necessary, for technical medical equipment and devices, and/or other technical and mechanical equipment provided per CLIN(s).

The manuals, handbooks or brochures shall be provided in hard copy, soft copy or with electronic access instructions, consistent with standard industry practices for the equipment or device. Where applicable, the manuals, handbooks or brochures will include electrical data and connection diagrams for all utilities. The documentation shall also contain a complete list of all replaceable parts showing part number, name, and quantity required.

(End of Clause)

C.4 VAAR 852.212-71 GRAY MARKET AND COUNTERFEIT ITEMS (FEB

2023)

(a) No used, refurbished, or remanufactured supplies or equipment/parts shall be provided.

This procurement is for new Original Equipment Manufacturer (OEM) items only. No gray market items shall be provided. Gray market items are OEM goods intentionally or unintentionally sold outside an authorized sales territory or sold by non-authorized dealers in an authorized sales territory.

(b) No counterfeit supplies or equipment/ parts shall be provided. Counterfeit items include unlawful or unauthorized reproductions, substitutions, or alterations that have been mismarked, misidentified, or otherwise misrepresented to be an authentic, unmodified item from the original manufacturer, or a source with the express written authority of the original manufacturer or current design activity, including an authorized aftermarket manufacturer. Unlawful or unauthorized substitutions include used items represented as new, or the false identification of grade, serial number, lot number, date code, or performance characteristics.

(c) Vendor shall be an OEM, authorized dealer, authorized distributor, or authorized reseller for the proposed equipment/system, verified by an authorization letter or other documents from the OEM. All software licensing, warranty and service associated with the equipment/system shall be in accordance with the OEM terms and conditions.

(End of Clause)

C.5 VAAR 852.215-70 SERVICE-DISABLED VETERAN-OWNED AND

VETERAN-OWNED SMALL BUSINESS EVALUATION FACTORS (JAN 2023)

(DEVIATION)

(a) In an effort to achieve socioeconomic small business goals, VA shall evaluate offerors based on their service-disabled veteran-owned or veteran-owned small business certification status and their proposed use of eligible certified service-disabled veteran-owned small businesses (SDVOSBs) and certified veteran-owned small businesses (VOSBs) as subcontractors.

(b) Eligible and certified service-disabled veteran-owned small businesses offerors will receive full credit, and offerors qualifying as veteran-owned small businesses will receive partial credit for the certified Service-Disabled Veteran-Owned and Veteran-Owned Small Business Status evaluation factor. To receive credit, an offeror must be listed at the time of submission of offers and at time of award, as a certified SDVOSB/VOSB in the SBA certification database on the SBA Veteran Small Business Certification Program portal at https://veterans.certify.sba.gov/ (see 13 CFR 128) and be otherwise eligible in accordance with SBA size standards for the acquisition and limitations on subcontracting requirements set forth in SBA regulations (see 13 CFR 121, 125 and 128.).

(c) Non-Veteran offerors proposing to use certified SDVOSBs or VOSBs as subcontractors will receive some consideration under this evaluation factor. Offerors must state in their proposals the names of the certified SDVOSBs and VOSBs with whom they intend to subcontract and provide a brief description of the proposed subcontracts and the approximate dollar values of the proposed subcontracts. In addition, the proposed subcontractors must be listed at the time of submission of offers and at time of award, as a certified SDVOSB/VOSB in the SBA certification database.

(d) Pursuant to 38 U.S.C. 8127(g), any business concern that is determined by VA to have willfully and intentionally misrepresented a company’s SDVOSB/VOSB status is subject to debarment for a period of not less than five years. This includes the debarment of all principals in the business.

(End of Clause)

C.6 VAAR 852.215-71 EVALUATION FACTOR COMMITMENTS (OCT 2019)

(a) The offeror agrees, if awarded a contract, to use the service-disabled veteran-owned small businesses (SDVOSBs) or veteran-owned small businesses (VOSBs) proposed as subcontractors in accordance with 852.215–70, Service-Disabled Veteran-Owned and Veteran- Owned Small Business Evaluation Factors, or to substitute one or more SDVOSBs or VOSBs for subcontract work of the same or similar value.

(b) Pursuant to 38 U.S.C. 8127(g), any business concern that is determined by VA to have willfully and intentionally misrepresented a company’s SDVOSB/VOSB status is subject to debarment for a period of not less than five years. This includes the debarment of all principals in the business.

(End of Clause)

C.7 VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT

REQUESTS (NOV 2018)

(a) Definitions. As used in this clause—

(1) Contract financing payment has the meaning given in FAR 32.001;

(2) Designated agency office means the office designated by the purchase order, agreement, or contract to first receive and review invoices. This office can be contractually designated as the receiving entity. This office may be different from the office issuing the payment;

https://veterans.certify.sba.gov/

(3) Electronic form means an automated system transmitting information electronically according to the accepted electronic data transmission methods and formats identified in paragraph (c) of this clause. Facsimile, email, and scanned documents are not acceptable electronic forms for submission of payment requests;

(4) Invoice payment has the meaning given in FAR 32.001; and

(5) Payment request means any request for contract financing payment or invoice payment submitted by the contractor under this contract.

(b) Electronic payment requests. Except as provided in paragraph (e) of this clause, the contractor shall submit payment requests in electronic form. Purchases paid with a government-wide commercial purchase card are considered to be an electronic transaction for purposes of this rule, and therefore no additional electronic invoice submission is required.

(c) Data transmission. A contractor must ensure that the data transmission method and format are through one of the following:

(1) VA’s Electronic Invoice Presentment and Payment System at the current website address provided in the contract.

(2) Any system that conforms to the X12 electronic data interchange (EDI) formats established by the Accredited Standards Center (ASC) and chartered by the American National Standards Institute (ANSI).

(d) Invoice requirements. Invoices shall comply with FAR 32.905.

(e) Exceptions. If, based on one of the circumstances in this paragraph (e), the Contracting Officer directs that payment requests be made by mail, the Contractor shall submit payment requests by mail through the United States Postal Service to the designated agency office.

Submission of payment requests by mail may be required for—

(1) Awards made to foreign vendors for work performed outside the United States;

(2) Classified contracts or purchases when electronic submission and processing of payment requests could compromise the safeguarding of classified or privacy information;

(3) Contracts awarded by contracting officers in the conduct of emergency operations, such as responses to national emergencies;

(4) Solicitations or contracts in which the designated agency office is a VA entity other than the VA Financial Services Center in Austin, Texas; or

(5) Solicitations or contracts in which the VA designated agency office does not have electronic invoicing capability as described above.

C.9 VAAR 852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT

2020) The Contracting Officer reserves the right to designate an Administrative Contracting Officer (ACO) for the purpose of performing certain tasks/duties in the administration of the contract.

Such designation will be in writing through an ACO Letter of Delegation and will identify the responsibilities and limitations of the ACO. A copy of the ACO Letter of Delegation will be furnished to the Contractor.

(End of Clause)

C.10 VAAR 852.246-71 REJECTED GOODS (OCT 2018)

(a) Supplies and equipment. Rejected goods will be held subject to Contractor’s order for not more than 15 days, after which the rejected merchandise will be returned to the Contractor’s address at the Contractor’s risk and expense. Expenses incident to the examination and testing of materials or supplies that have been rejected will be charged to the Contractor.

(b) Perishable supplies. The Contractor shall remove rejected perishable supplies within 48 hours after notice of rejection. Supplies determined to be unfit for human consumption will not be removed without permission of the local health authorities. Supplies not removed within the allowed time may be destroyed. The Department of Veterans Affairs will not be responsible for, nor pay for, products rejected. The Contractor will be liable for costs incident to examination of rejected products.

(End of Clause)

C.11 VAAR 852.247-71 DELIVERY LOCATION (OCT 2018)

Shipment of deliverable items, other than reports, shall be to:

Department of Veterans Affairs

Southeast Louisiana Veterans Healthcare System

2400 Canal Street

New Orleans, LA 70119

(End of Addendum to 52.212-4)

SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR

ATTACHMENTS

Intentionally Left Blank

SECTION E - SOLICITATION PROVISIONS

ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL PRODUCTS

AND COMMERCIAL SERVICES

Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The following provisions are incorporated into 52.212-1 as an addendum to this solicitation:

E.1 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY

REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/index.html http://www.va.gov/oal/library/vaar/

(End of Provision)

FAR

Number

Title Date

52.204-7 SYSTEM FOR AWARD MANAGEMENT OCT 2018

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE

REPORTING

AUG 2020

52.211-6 BRAND NAME OR EQUAL AUG 1999

52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES

MAR 2023

E.2 52.204-24 REPRESENTATION REGARDING CERTAIN

TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it ‘‘does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument’’ in paragraph (c)(1) in the provision at 52.204–26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212–3, Offeror Representations and Certifications– Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it ‘‘does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services’’ in paragraph (c)(2) of the provision at 52.204–26, or in paragraph (v)(2)(ii) of the provision at 52.212–3.

(a) Definitions. As used in this provision—

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204–25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115–232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115–232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a federal contract.

Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services.”

(d) Representations. The Offeror represents that— https://www.sam.gov/

(1) It [] will, [] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds “will’’ in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that—

It [] does, [] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services.

The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds “does’’ in paragraph (d)(2) of this section.

(e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded “will’’ in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand;

model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded “does’’ in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand;

model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of Provision)

E.3 52.214-21 DESCRIPTIVE LITERATURE (APR 2002)

(a) Descriptive literature, as used in this provision, means information furnished by a bidder, such as cuts, illustrations, drawings, and brochures, that shows a product's characteristics or construction or explains its operation. The term includes only that information required to evaluate the acceptability of the product and excludes other information for operating or maintaining the product.

(b) Descriptive literature is required to establish, for the purpose of evaluation and award, details of the product offered that are specified elsewhere in the solicitation and pertain to significant elements such as—

(1) Design;

(2) Materials;

(3) Components;

(4) Performance characteristics; and

(5) Methods of manufacture, assembly, construction, or operation.

(c) Descriptive literature, required elsewhere in this solicitation, shall be—

(1) Identified to show the item(s) of the offer to which it applies; and

(2) Received by the time specified in this solicitation.

(d) If the bidder fails to submit descriptive literature on time, the Government will reject the bid, except that late descriptive literature sent by mail may be considered under the Late Submissions, Modifications, and Withdrawals of Bids provision of this solicitation.

(e) If the descriptive literature fails to show that the product offered conforms to the requirements of the solicitation, the Government will reject the bid.

(End of Provision)

(End of Addendum to 52.212-1)

E.4 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Lowest Priced Technically Acceptable (LPTA).

(i) The Government will award a contract resulting from this on the basis of the Lowest Priced Technically Acceptable (LPTA) responsible vendor whose quote, conforming to the solicitation, meets or exceeds the acceptable standards for non-cost factors. All quoters must have a current registration in the System for Award Management and certified as a Small Business under Provision 52.212-3,authorized distributor letter (if not the original equipment manufacturer (OEM)), and meet all specifications outlined in the SOW to be considered responsive. Since this solicitation is Lowest Price Technically Acceptable (LPTA), the evaluation board will begin by reviewing the lowest priced quote. If the board determines that this quote is technically acceptable, no other quotes will be reviewed. This quote will have been deemed technically acceptable with the lowest price, so for this. reason the award will be made based on FAR guidance.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished too the successful offeror within the time for acceptance specified in the offer, shall result in a binding.

contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt unless a written notice of withdrawal is received before award.

(End of Provision)

E.5 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS—

COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2022)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision—

Covered telecommunications equipment or services has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR 127, and the concern is identified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest-level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000- 9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204–25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations mean business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education;

or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties’ control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small, disadvantaged business concern, consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that—

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by—

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States;

and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2);

and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

Women-owned small business concern means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b)(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The…